vRtrLdpNgSessMaxFecThresChanged
TIMETRA-LDP-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.3.91.0.7
Object
notification
[CAUSE] A vRtrLdpNgSessMaxFecThresChanged notification is generated
when the number of FECs accepted from the peer has exceeded or drops
below vRtrLdpNgSessOperMaxFecThreshold percent of the value specified
by vRtrLdpNgSessParamMaxFec.
New notification will not be generated if multiple internal change
events occur for the same level indicated by
vRtrLdpNgSessOperThresLevel during a 2 minute interval.
If any parameter in FEC limit configuration changes then we would
always raise this trap if current number of FECs are above the
configured threshold or has crossed the threshold downwards. If we
remain on or below the configured threshold before and after the
configuration changes then no trap would be generated.
[EFFECT] No direct effect but if the peer LSR continues to send
further Label Mapping Message, then the number of FECs may exceed the
configured maximum (vRtrLdpNgSessParamMaxFec) resulting in the
generation of vRtrLdpNgSessMaxFecLimitReached notification.
[RECOVERY] Appropriate Configuration changes in local or peer LSR will
be required.
Context
- MIB
- TIMETRA-LDP-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.91.0.7- Type
- notification
- Status
- current
- Parent
- tmnxLdpNgNotifications
- Siblings
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpNgIpv4InstStateChange [CAUSE] The vRtrLdpNgIpv4InstStateChange is generated when the IPv4
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv4OperState.
[EFFECT] Based o… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.1 |
| vRtrLdpNgAddrFecCommMismatch [CAUSE] A vRtrLdpNgAddrFecCommMismatch notification is generated when
two or more peer routers advertising labels for the given address FEC
have been assigned differing communitie… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.11 |
| vRtrLdpNgIpv6InstStateChange [CAUSE] The vRtrLdpNgIpv6InstStateChange is generated when the IPv6
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv6OperState.
[EFFECT] Based o… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.2 |
| vRtrLdpNgIfStateChange [CAUSE] The vRtrLdpNgIfStateChange notification is generated when the
LDP interface changes state either administratively or operationally.
[EFFECT] Based on the vRtrLd… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.3 |
| vRtrLdpNgInetIfStateChange [CAUSE] The vRtrLdpNgInetIfStateChange notification is generated when
the LDP sub-interface changes state either administratively or
operationally.
[EFFECT] Based on th… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.4 |
| vRtrLdpNgTargPeerStateChange [CAUSE] The vRtrLdpNgTargPeerStateChange notification is generated
when the LDP peer changes state either administratively or
operationally.
[EFFECT] Based on the vRtrL… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.5 |
| vRtrLdpNgSessionStateChange [CAUSE] The vRtrLdpNgSessionStateChange notification is generated when
the LDP Overload Notification message is sent to or received from the
peer vRtrLdpNgPeerLdpId for the combin… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.6 |
| vRtrLdpNgSessMaxFecLimitReached [CAUSE] A vRtrLdpNgSessMaxFecLimitReached notification is generated
when the number of FECs accepted from the peer has reached the value
specified by vRtrLdpNgSessParamMaxFec.
… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.8 |
| vRtrLdpNgResourceExhaustion [CAUSE] The vRtrLdpNgResourceExhaustion notification is generated when
CPM or data path resource required for FEC resolution is exhausted.The
new notification will not be generate… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpNgSessParamMaxFec The value of vRtrLdpNgSessParamMaxFec specifies the maximum number of
FECs that will be accepted from this peer LSR.
A value of zero specifies there is no limit to … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.8.1.21 |
| vRtrLdpNgSessOperThresLevel The value of vRtrLdpNgSessOperThresLevel indicates whether the number
of fec-bindings has exceeded or is below the configured fec threshold. | scalar | Enumeration | .1.3.6.1.4.1.6527.3.1.2.91.56.1 |
| vRtrLdpNgSessOperMaxFecThreshold The value of vRtrLdpNgSessOperMaxFecThreshold indicates the
operational percentage of vRtrLdpNgSessParamMaxFec. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.4.1.63 |