vRtrLdpNgSessMaxFecLimitReached
TIMETRA-LDP-NG-MIB ·
.1.3.6.1.4.1.6527.3.1.3.91.0.8
Object
notification
[CAUSE] A vRtrLdpNgSessMaxFecLimitReached notification is generated
when the number of FECs accepted from the peer has reached the value
specified by vRtrLdpNgSessParamMaxFec.
If the current number of FECs go below the limit but higher than the
configured threshold and again start to increase and hit the limit a
second time, we will raise a trap if 2 or more minutes have elapsed
since the first vRtrLdpNgSessMaxFecLimitReached trap was sent.
If any parameter in FEC limit configuration changes and the current
number of FECs are equal to or higher than the limit specified by
vRtrLdpPeerMaxFec, then we would always raise the
vRtrLdpNgSessMaxFecLimitReached trap.
[EFFECT] When the number of FECs exceed the configured maximum
(vRtrLdpNgSessParamMaxFec) it results in any of the following:
(1) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR
Overload Capability is supported, then Overload procedure will take
place.
(2) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'false' and LSR
Overload Capability is not supported, Label Mapping Message will be
returned with Label Release Message.
(3) If vRtrLdpNgSessParamMaxFecLogOnly is set to 'true', no action
will be taken.
[RECOVERY] Appropriate Configuration changes in local or peer LSR will
be required.
Context
- MIB
- TIMETRA-LDP-NG-MIB
- OID
.1.3.6.1.4.1.6527.3.1.3.91.0.8- Type
- notification
- Status
- current
- Parent
- tmnxLdpNgNotifications
- Siblings
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpNgIpv4InstStateChange [CAUSE] The vRtrLdpNgIpv4InstStateChange is generated when the IPv4
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv4OperState.
[EFFECT] Based o… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.1 |
| vRtrLdpNgAddrFecCommMismatch [CAUSE] A vRtrLdpNgAddrFecCommMismatch notification is generated when
two or more peer routers advertising labels for the given address FEC
have been assigned differing communitie… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.11 |
| vRtrLdpNgIpv6InstStateChange [CAUSE] The vRtrLdpNgIpv6InstStateChange is generated when the IPv6
LDP instance changes state operationally as specified by
vRtrLdpNgGenIPv6OperState.
[EFFECT] Based o… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.2 |
| vRtrLdpNgIfStateChange [CAUSE] The vRtrLdpNgIfStateChange notification is generated when the
LDP interface changes state either administratively or operationally.
[EFFECT] Based on the vRtrLd… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.3 |
| vRtrLdpNgInetIfStateChange [CAUSE] The vRtrLdpNgInetIfStateChange notification is generated when
the LDP sub-interface changes state either administratively or
operationally.
[EFFECT] Based on th… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.4 |
| vRtrLdpNgTargPeerStateChange [CAUSE] The vRtrLdpNgTargPeerStateChange notification is generated
when the LDP peer changes state either administratively or
operationally.
[EFFECT] Based on the vRtrL… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.5 |
| vRtrLdpNgSessionStateChange [CAUSE] The vRtrLdpNgSessionStateChange notification is generated when
the LDP Overload Notification message is sent to or received from the
peer vRtrLdpNgPeerLdpId for the combin… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.6 |
| vRtrLdpNgSessMaxFecThresChanged [CAUSE] A vRtrLdpNgSessMaxFecThresChanged notification is generated
when the number of FECs accepted from the peer has exceeded or drops
below vRtrLdpNgSessOperMaxFecThreshold per… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.7 |
| vRtrLdpNgResourceExhaustion [CAUSE] The vRtrLdpNgResourceExhaustion notification is generated when
CPM or data path resource required for FEC resolution is exhausted.The
new notification will not be generate… | notification | - | .1.3.6.1.4.1.6527.3.1.3.91.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vRtrLdpNgSessParamMaxFec The value of vRtrLdpNgSessParamMaxFec specifies the maximum number of
FECs that will be accepted from this peer LSR.
A value of zero specifies there is no limit to … | column | Unsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.8.1.21 |
| vRtrLdpNgSessOperMaxFecThreshold The value of vRtrLdpNgSessOperMaxFecThreshold indicates the
operational percentage of vRtrLdpNgSessParamMaxFec. | column | percent SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6527.3.1.2.91.4.1.63 |