fsMplsTeDebugLevel

SUPERMICRO-MPLS-MIB · .1.3.6.1.4.1.10876.101.1.13.1.1.4
MIB view Table view

Object

scalar r/w SNMPv2-SMIUnsigned32 
This is a 4-byte (32-bit) object with each bit enabling/
disabling the debug message.
It Tells the level at which the Debug value is enabled
Five most significant nibbles correspond to the module identity
and the three least significant nibbles correspond to the various
Log Types.
A log of specific type in a module is displayed when the
bits corresponding to the module and the log type are both
set to 1.
The various bit patterns corresponding to the module and the log
type are as follows:
          
ROUTINE:
0000 0000 0000 0000 0001 - MAIN     - Te main module routines
0000 0000 0000 0000 0010 - LLVL     - Low level routines
0000 0000 0000 0000 0100 - EXTN     - External module routines
0000 0000 0000 0000 1000 - DIFF     - Diff Serv routines
          
LOG TYPES:
0000 0000 0001 - PRCS       - Process related logs
0000 0000 0010 - FAIL       - Failure logs
0000 1000 0000 - TEST FAIL  - Test routines failure logs
1111 1111 1111 - ALL        - All types of logs
          
Logs will be displayed with module name as MAIN or EXTN.

Context

MIB
SUPERMICRO-MPLS-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.1.1.4
Type
scalar
Access
readwrite
Status
current
Parent
fsMplsConfigObjects
Siblings
10

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Object Constraints
range: 6-40
Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsAdminStatus
The fsMpls module's administration status indicating whether it is up or down or not in service. The Admin Status can be set to only up and down whereas the upinprgrs and downinpr…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.1
fsMplsRsvpTeGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by RSVP-TE LSPs after RSVP-TE component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.10
fsMplsLdpGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by LDP LSPs after LDP component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.11
fsMplsQosPolicy
Specifies the Qos Policy to be adapted by this MPLS system. Mpls-FM, interprets the ServiceType field of IP Header, based on the Qos configured. MPLS admin status should be made d…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.2
fsMplsFmDebugLevel
This is a 4-byte (32-bit) object with each bit enabling/ disabling a particular type of trace/debug statement. On setting the following bit patterns on the Least Significant Bits …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.3
fsMplsLsrLabelAllocationMethod
For any given LSR , the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.5
fsMplsDiffServElspPreConfExpPhbMapIndex
Index to the PreConfigured EXP to PHB Mapping for ELSPs. Value of this object should be less then fsMplsDiffServElspMapEntries.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.6
fsMplsLdpEntityTable
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
table-.1.3.6.1.4.1.10876.101.1.13.1.1.7
fsMplsLdpLsrId
The Label Switching Router's Identifier. This object is a writable version of the object mplsLdpLsrId in MPLS-LDP-STD-MIB. When changing this object, the following actions take p…
scalarMPLS-TC-STD-MIBMplsLsrIdentifier.1.3.6.1.4.1.10876.101.1.13.1.1.8
fsMplsLdpForceOption
This object is currently used only in conjunction with the object fsMplsLdpLsrId. If this object is set to true(1), Label Switching Router's Identifier when configured…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.1.1.9