SUPERMICRO-MPLS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
16
Rows
16
Columns
98
.1.3.6.1.4.1.10876.101.1.13.1.1.7 · 1 row entry · 12 columns
This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).
fsMplsLdpEntityEntry entry .1.3.6.1.4.1.10876.101.1.13.1.1.7.1
An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.
Indexes
No indexes recorded
Column Syntax OID
fsMplsLdpEntityPHPRequestMethod
For any given LDP session, the method of requesting PHP
support must be specified, if PHP(penultimate Hop Popping)
is desired, PHP request can be advertised either by
implicit null labels or explicit null labels.
NOTE…
Enumerationr/w
Enumerated Values:
0explicit
1disabled
3implicit
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.1
fsMplsLdpEntityTransAddrTlvEnable
When this object is set to true(1), Transport Address TLV
is sent in the LDP Hello Message.

When this object is set to false(2), Transport Address TLV
is not set in the LDP Hello Message.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.2
fsMplsLdpEntityTransportAddress
The IP Address stored in this object is carried in the
Transport Address TLV of the LDP Hello Message.

The IP Address configured in this object should be a loopback
address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.3
fsMplsLdpEntityLdpOverRsvpEnable
When this object is set to true(1), LDP LSP Tunneling over RSVP
is enabled.

This object is applicable only for the Targeted Session i.e.,
this object can be set to true(1) only if the object
mplsLdpEn…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.4
fsMplsLdpEntityOutTunnelIndex
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

Outgoing Tunnel Index is stored in this object.
MPLS-TC-STD-MIBMplsTunnelIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.5
fsMplsLdpEntityOutTunnelInstance
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

Outgoing Tunnel Instance is stored in this object.
MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.6
fsMplsLdpEntityOutTunnelIngressLSRId
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

IP Address of Ingress LSR of Outgoing Tunnel
is stored in this object.
MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.7
fsMplsLdpEntityOutTunnelEgressLSRId
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

IP Address of Egress LSR of Outgoing Tunnel
is stored in this object.
MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.8
fsMplsLdpEntityInTunnelIndex
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

Incoming Tunnel Index is stored in this object.
MPLS-TC-STD-MIBMplsTunnelIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.9
fsMplsLdpEntityInTunnelInstance
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

Incoming Tunnel Instance is stored in this object.
MPLS-TC-STD-MIBMplsTunnelInstanceIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.10
fsMplsLdpEntityInTunnelIngressLSRId
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

IP Address of Ingress LSR of Tunnel
is stored in this object.
MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.11
fsMplsLdpEntityInTunnelEgressLSRId
This object is applicable only if LDP LSP Tunneling over RSVP
is enabled i.e., if fsMplsLdpEntityLdpOverRsvpEnable is set to
true(1).

IP Address of Egress LSR of Incoming Tunnel
is stored in this object.
MPLS-TC-STD-MIBMplsExtendedTunnelIdr/w
Textual Convention: MPLS-TC-STD-MIBMplsExtendedTunnelId Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.1.7.1.12
.1.3.6.1.4.1.10876.101.1.13.1.4.3 · 1 row entry · 3 columns
The fsMplsCrlspTnlTable uses fsMplsCrlspTnlIndexn.
fsMplsCrlspTnlIndex points to the primary index of 
the mplsTunnelTable (See <draft-ietf-mpls-te-mib-06.txt>).
fsMplsCrlspTnlEntry entry .1.3.6.1.4.1.10876.101.1.13.1.4.3.1
An entry in this table represents fsMplsCrlspTnlIndex.
An entry can be created by a network administrator
or by an SNMP agent as instructed by CRLDP.
Indexes
fsMplsCrlspTnlIndex
Column Syntax OID
fsMplsCrlspTnlIndex
This index points to the primary index of the
mplsTunnelTable of <draft-ietf-mpls-te-mib-06.txt>.
MPLS-TC-STD-MIBMplsTunnelIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.1
fsMplsCrlspTnlRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.2
fsMplsCrlspTnlStorageType
This variable indicates the storage type for this
object.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.4.1.10876.101.1.13.1.4.3.1.3
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4 · 1 row entry · 18 columns
This table is an extension to pw Table for configuring the mode
of Pseudowire
fsMplsL2VpnPwEntry entry .1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1
A row in this table augments a row in pwTable.
This entry specifies the mode of PW.
Indexes
No indexes recorded
Column Syntax OID
fsMplsL2VpnPwMode
This field indicates the mode of pseudowire.
Enumerationr/w
Enumerated Values:
1vpws
2vpls
3ipls
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.1
fsMplsL2VpnVplsIndex
Valid only if fsMplsL2VpnPwMode is vpls(2).
Contains the Index of fsMplsVplsConfigTable
(fsMplsVplsInstanceIndex)
Unsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.2
fsMplsL2VpnPwLocalCapabAdvert
This object is set to indicate the capabilities of the pseudowire.
IANAPwCapabilitiesr/w
Textual Convention: IANAPwCapabilities Bits
Type Values:
0pwStatusIndication
1pwVCCV
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.3
fsMplsL2VpnPwLocalCCSelected
Indicates the type of Control channel selected from the matching
types between fsMplsL2VpnPwLocalCCAdvert and fsMplsL2VpnPwRemoteCCAdvert
based on the following precedency rule

1. Type 1: PWE3 Control W…
PwCcTypesCapabilities
Textual Convention: PwCcTypesCapabilities Bits
Type Values:
0ach
1routerAlertLabel
2ttlExpiry
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.4
fsMplsL2VpnPwLocalCVSelected
Indicates the selected connection verification type from the matching
types between fsMplsL2VpnPwLocalCVAdvert and
fsMplsL2VpnPwRemoteCVAdvert.
PwCvTypesCapabilities
Textual Convention: PwCvTypesCapabilities Bits
Type Values:
0icmpping
1lspping
2bfdIpUdpFaultDetect
3bfdIpUdpFaultDetectAndStatusNotif
4bfdAchFaultDetect
5bfdAchFaultDetectAndStatusNotif
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.5
fsMplsL2VpnPwLocalCCAdvert
Indicates the type of control channel types advertised by this node to peer.
PW Local control channel can have one or more types available in the
fsMplsLocalCCTypesCapabilities object. If this object is not configured…
PwCcTypesCapabilitiesr/w
Textual Convention: PwCcTypesCapabilities Bits
Type Values:
0ach
1routerAlertLabel
2ttlExpiry
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.6
fsMplsL2VpnPwLocalCVAdvert
Indicates the type of connection verification types advertised by this node
to the peer. PW Local CV types can have one or more types available in the
fsMplsLocalCVTypesCapabilities object. When this object is not conf…
PwCvTypesCapabilitiesr/w
Textual Convention: PwCvTypesCapabilities Bits
Type Values:
0icmpping
1lspping
2bfdIpUdpFaultDetect
3bfdIpUdpFaultDetectAndStatusNotif
4bfdAchFaultDetect
5bfdAchFaultDetectAndStatusNotif
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.7
fsMplsL2VpnPwRemoteCCAdvert
This field indicates the type of control channel advertised
by the peer to this node. This object is configurable only for manual
mode of pseudowire (i.e., when pseudowire signaling is not used).
This object acts as re…
PwCcTypesCapabilitiesr/w
Textual Convention: PwCcTypesCapabilities Bits
Type Values:
0ach
1routerAlertLabel
2ttlExpiry
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.8
fsMplsL2VpnPwRemoteCVAdvert
This field indicates the type of connection verification advertised
by the peer to this node. This object is configurable only for manual
mode of pseudowires (i.e., when pseudowire signaling is not used).
This object…
PwCvTypesCapabilitiesr/w
Textual Convention: PwCvTypesCapabilities Bits
Type Values:
0icmpping
1lspping
2bfdIpUdpFaultDetect
3bfdIpUdpFaultDetectAndStatusNotif
4bfdAchFaultDetect
5bfdAchFaultDetectAndStatusNotif
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.9
fsMplsL2VpnPwOamEnable deprecated
This variable indicates the OAM status of the pseudowire. The value
'true' denotes that OAM is enabled for this pseudowire and 'false' denotes
that OAM is disabled for this pseudowire. The value of this object
may be…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.10
fsMplsL2VpnPwGenAGIType
This variable indicates the AGI type if generalized FEC
(129) is used for PW signaling or configuration. It SHOULD
return the value of zero otherwise.
PwGenIdTyper/w
Textual Convention: PwGenIdType Unsigned32
Type Constraints:
range: 0..254
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.11
fsMplsL2VpnPwGenLocalAIIType
This object is the type of the local forwarder
attachment individual identifier (AII) to be used
by this PW if generalized FEC (129) is used for PW
signaling or configuration.

If Source-AC-Id and Destinat…
PwGenIdTyper/w
Textual Convention: PwGenIdType Unsigned32
Type Constraints:
range: 0..254
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.12
fsMplsL2VpnPwGenRemoteAIIType
This object is the type of the remote forwarder
attachment individual identifier (AII) to be used
by this PW if generalized FEC (129) is used for PW
signaling or configuration.

If Source-AC-Id and Destina…
PwGenIdTyper/w
Textual Convention: PwGenIdType Unsigned32
Type Constraints:
range: 0..254
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.13
fsMplsL2VpnProactiveOamSsnIndex
Indicates the proactive session index for this Pseudowire.
When a proactive session for this Pseudowire is established,
the application has to update this object with the
session index.
The value '0' indicates that pro…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.14
fsMplsL2VpnPwAIIFormat
Indicates whether the configured Attachment identifier is an IP address
or a string.

The value of bit 0 (saiiIp) if set indicates SAII input is an
IP address.

The value of bit 0 (saiiIp) i…
Bitsr/w
Enumerated Values:
0saiiIp
1taiiIp
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.15
fsMplsL2VpnIsStaticPw
This MIB object indicates whether the pseudowire is created via administrative
control or dynamically. If value is 'true', then it denotes that PW is created
by the user/administrator. Otherwise,it is a signalled pseu…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.16
fsMplsL2VpnNextFreePwEnetPwInstance
This MIB object contains the next free running ethernet pseudowire Instance
associated with the pseudowire Index.
PW-TC-STD-MIBPwIndexType
Textual Convention: PW-TC-STD-MIBPwIndexType Unsigned32
Type Constraints:
range: 1..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.17
fsMplsL2VpnPwSynchronizationStatus
Indicates the Synchronization status of the Pseudowire upon LDP Graceful
Restart. Only Four different values are possible.
0. Fully Synchronized
1. Local Synchronized.
2. Remote Synchronized
3. Not Synchronized.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.5.1.4.1.18
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5 · 1 row entry · 9 columns
This table specifies information for configuring
and monitoring Virtual Private Lan Services(VPLS).
fsMplsVplsConfigEntry entry .1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1
A row in this table represents a Virtual Private Lan
Service(VPLS) in a packet network. It is indexed by
fsMplsVplsInstanceIndex, which uniquely identifies a single VPLS.

A row is created by the opera…
Indexes
fsMplsVplsInstanceIndex
Column Syntax OID
fsMplsVplsInstanceIndex
Unique index for the conceptual row identifying
a VPLS service.
Unsigned32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.1
fsMplsVplsVsi
The Layer2 Bridge Instance Identifier (or)
Virtual Switch Identifier. An Entry with this
object as the index should exist in the
fsVcmConfigTable of fsvcm.mib
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.2
fsMplsVplsVpnId
This objects indicates the IEEE 802-1990
VPN ID of the associated VPLS service.
The First 3 Octects consists of OUI(Organizationally
Unique Identifier).Rest 4 Octects uniquely identifies
the VPN within the context of t…
OctetStringr/w
Constraints:
range: 0-0
range: 7-7
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.3
fsMplsVplsName
A textual name of the VPLS Service.
If there is no local name or this object is
otherwise not applicable, then this object MUST
contain a zero-length octet string.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.4
fsMplsVplsDescr
A textual string containing information about the
VPLS service. If there is no information for this VPLS
service, then this object MUST contain a zero-length
octet string.
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.5
fsMplsVplsFdbHighWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance at
which the fsMplsVplsFdbFullAlarm notification
will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.6
fsMplsVplsFdbLowWatermark
This object specifies the utilization of the
forwarding database for this VPLS instance
at which the fsMplsVplsFdbClearedAlarm
notification will be sent.
percentageUnsigned32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.7
fsMplsVplsRowStatus
For creating, modifying, and deleting this row.
For making a row available for use [Active State],
a valid VSI and VPN Id is Mandatory.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.8
fsMplsVplsL2MapFdbId
For mapping VplsInstance to a L2 FDB Id (Forwarding database Identifier).
Integer32r/w
Constraints:
range: 4096-65535
.1.3.6.1.4.1.10876.101.1.13.1.5.1.5.1.9
.1.3.6.1.4.1.10876.101.1.13.1.5.1.6 · 1 row entry · 4 columns
This table reports and configure the current inbound MPLS   
tunnels (i.e. Egress Tunnels). This table is to be used only
in case of pwMplsType TE. It also reports the current 
incoming tunnel and LSP which carries the PW traffic from the PSN.
fsPwMplsInboundEntry entry .1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1
A row in this table configures the incoming tunnel used for
carrying the PW traffic from the PSN.

An entry in this table augments the pwMplsEntry, and is
created automatically when the corresponding …
Indexes
No indexes recorded
Column Syntax OID
fsPwMplsInboundTunnelIndex
This object is part of set of indexes for inbound tunnel.
The operator set this object to represent the desired
tunnel tail-end coming from the peer carrying the PW traffic.
MPLS-TC-STD-MIBMplsTunnelIndexr/w
Textual Convention: MPLS-TC-STD-MIBMplsTunnelIndex Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.1
fsPwMplsInboundTunnelInstance
This object indicates the actual tunnel instance that is currently
active and carrying the PW traffic - it should return the
value of zero until if the information from the MPLS-TE
application is not yet known.
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Textual Convention: MPLS-TC-STD-MIBMplsTunnelInstanceIndex Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.2
fsPwMplsInboundTunnelEgressLSR
This object is part of set of indexes for inbound tunnel.
The operator set this object to represent the desired
tunnel tail-end coming from the peer carrying the PW traffic.
MPLS-TC-STD-MIBMplsLsrIdentifierr/w
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.3
fsPwMplsInboundTunnelIngressLSR
This object is part of set of indexes for inbound tunnel.
The operator set this object to represent the desired
tunnel tail-end coming from the peer carrying the PW traffic
It is typically equal to pwPeerAddr.
MPLS-TC-STD-MIBMplsLsrIdentifierr/w
Textual Convention: MPLS-TC-STD-MIBMplsLsrIdentifier OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.10876.101.1.13.1.5.1.6.1.4
.1.3.6.1.4.1.10876.101.1.13.1.5.1.11 · 1 row entry · 4 columns
This table is used for the Port related configuration on MPLS.
All the objects in this table are applicable for UNI ports only.
fsMplsPortEntry entry .1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1
Each entry in this table specifies the MPLS related
port configurations. This table is indexed by ifIndex.
Indexes
IF-MIBifIndex
Column Syntax OID
fsMplsPortBundleStatus
A Truth value indicating that Bundling is enabled/disabled
on this Port.if Bundling is enabled,Multiple AC on the UNI
port can map to the same VPLS.If Bundling is disabled,
multiple AC on the UNI port cannot be mappe…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.1
fsMplsPortMultiplexStatus
A Truth value indicating that Multiplexing is enabled/disabled
on this port.if Multiplexing is enabled,UNI port can be mapped
to multiple VPLS instances/VPNs.If Multiplexing is disabled,
UNI port cannot be mapped to …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.2
fsMplsPortAllToOneBundleStatus
A Truth value indicating that AllToOneBundling is enabled/disabled
on this port.If AllToOneBundling is enabled,All ACs on a UNI port
are mapped to single VPLS.if AllToOneBundling is disabled,bundling
of ACs on a UNI p…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.3
fsMplsPortRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.5.1.11.1.4
.1.3.6.1.4.1.10876.101.1.13.1.6.1 · 1 row entry · 5 columns
The fsMplsTunnelRSVPResTable allows a manager to
specify which resources are desired for an MPLS
tunnel. This table also allows several tunnels
to point to a single entry in this table,
implying that these tunnels should share
resources.
fsMplsTunnelRSVPResEntry entry .1.3.6.1.4.1.10876.101.1.13.1.6.1.1
An entry in this table represents a set of
resources for an MPLS RSVP based tunnel. An entry in this table
is augemented by an entry in mplsTunnelResourceTable.

The values of the MIB elements present
in a g…
Indexes
No indexes recorded
Column Syntax OID
fsMplsTunnelRSVPResTokenBucketRate
The maximum incoming rate in kilobits/second. Note
that setting fsMplsTunnelInMaxRate,
fsMplsTunnelInMeanRate, and
fsMplsTunnelInMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance …
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.1
fsMplsTunnelRSVPResTokenBucketSize
The maximum incoming rate in kilobits/second. Note
that setting fsMplsTunnelInMaxRate,
fsMplsTunnelInMeanRate, and
fsMplsTunnelInMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance …
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.2
fsMplsTunnelRSVPResPeakDataRate
The maximum incoming rate in kilobits/second. Note
that setting fsMplsTunnelInMaxRate,
fsMplsTunnelInMeanRate, and
fsMplsTunnelInMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance …
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.3
fsMplsTunnelRSVPResMinimumPolicedUnit
The maximum incoming rate in bits/second. Note
that setting fsMplsTunnelInMaxRate,
fsMplsTunnelInMeanRate, and
fsMplsTunnelInMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance of
m…
INTEGRATED-SERVICES-MIBMessageSizer/w
Textual Convention: INTEGRATED-SERVICES-MIBMessageSize Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.4
fsMplsTunnelRSVPResMaximumPacketSize
The maximum incoming rate in bits/second. Note
that setting fsMplsTunnelInMaxRate,
fsMplsTunnelInMeanRate, and
fsMplsTunnelInMaxBurstSize to 0 indicates best-
effort treatment.
This object is copied to an instance of
m…
INTEGRATED-SERVICES-MIBMessageSizer/w
Textual Convention: INTEGRATED-SERVICES-MIBMessageSize Integer32
Type Constraints:
range: 0..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.6.1.1.5
.1.3.6.1.4.1.10876.101.1.13.1.6.2 · 1 row entry · 5 columns
The fsMplsTunnelCRLDPResTable allows a manager to
specify which CR-LDP-specific resources are desired
for an MPLS tunnel if that tunnel is signaled using
CR-LDP. Note that these attributes are in addition
to those specified in mplsTunnelCRLDPResTable. This
table augments the mplsTunnelCRLDPResTable.
fsMplsTunnelCRLDPResEntry entry .1.3.6.1.4.1.10876.101.1.13.1.6.2.1
An entry in this table represents a set of
resources for an MPLS tunnel established using CRLDP
(mplsTunnelSignallingProto equal to crldp (3)). An
entry can be created by a network administrator or
by an SNMP agent as …
Indexes
MPLS-TE-STD-MIBmplsTunnelResourceIndex
Column Syntax OID
fsMplsTunnelCRLDPResPeakDataRate
The peak rate - the maximum rate at which traffic
will be sent on the CRLSP.
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.1
fsMplsTunnelCRLDPResCommittedDataRate
The committed rate - the committed rate at which
traffic will be sent on the CRLSP.
kilobits per secondMPLS-TC-STD-MIBMplsBitRater/w
Textual Convention: MPLS-TC-STD-MIBMplsBitRate Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.2
fsMplsTunnelCRLDPResPeakBurstSize
The peak burst size - the maximum burst size
of the traffic that can occur in the established
CRLSP.
bytesMPLS-TC-STD-MIBMplsBurstSizer/w
Textual Convention: MPLS-TC-STD-MIBMplsBurstSize Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.3
fsMplsTunnelCRLDPResCommittedBurstSize
The committed burst size - the committed burst size
of the traffic that will be handled in the established
CRLSP.
bytesMPLS-TC-STD-MIBMplsBurstSizer/w
Textual Convention: MPLS-TC-STD-MIBMplsBurstSize Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.4
fsMplsTunnelCRLDPResExcessBurstSize
The Excess burst size - the excess burst size limit to
be used for traffic conditioning at the ingress of the
CRLSP.
bytesMPLS-TC-STD-MIBMplsBurstSizer/w
Textual Convention: MPLS-TC-STD-MIBMplsBurstSize Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.10876.101.1.13.1.6.2.1.5
.1.3.6.1.4.1.10876.101.1.13.1.7.1 · 1 row entry · 4 columns
ELSP's EXP to PHB Mapping Table
fsMplsDiffServElspMapEntry entry .1.3.6.1.4.1.10876.101.1.13.1.7.1.1
ELSP Mapping Table Entry
Indexes
fsMplsDiffServElspMapIndex fsMplsDiffServElspMapExpIndex
Column Syntax OID
fsMplsDiffServElspMapIndex
This object specifies the Index of the ELSP Map Element
Value of this object should be less then
fsMplsDiffServElspMapEntries
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.1
fsMplsDiffServElspMapExpIndex
This object specifies the Exp value of a particular EXP to PHB
mapping
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.2
fsMplsDiffServElspMapPhbDscp
This object specifies the PHB Dscp value for a given EXP
value in a given EXP to PHB mapping.
Enumerationr/w
Enumerated Values:
0df
8cs1
10af11
12af12
14af13
16cs2
18af21
20af22
22af23
24cs3
26af31
28af32
30af33
32cs4
34af41
36af42
38af43
40cs5
46ef
48cs6
56cs7
.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.3
fsMplsDiffServElspMapStatus
Specifies whether this given EXP to PHB mapping is
active/notInService. fsMplsDiffServElspPreConfExpPhbMapIndex
should be set to -1 to unmap a entry in preconfigured case.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.7.1.1.4
.1.3.6.1.4.1.10876.101.1.13.1.7.2 · 1 row entry · 6 columns
Table containing the DiffServ Params for a given NHLFE
fsMplsDiffServParamsEntry entry .1.3.6.1.4.1.10876.101.1.13.1.7.2.1
DiffServ Params Table Entry
Indexes
fsMplsDiffServParamsIndex
Column Syntax OID
fsMplsDiffServParamsIndex
This object specifies the Index of the DiffServ Params Element
Value of this index should be less then
fsMplsDiffServParamsEntries
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.1
fsMplsDiffServParamsServiceType
This object specifies the type of service supported on this
lsp
Enumerationr/w
Enumerated Values:
0genlsp
1diffservelsp
2diffservllsp
3intserv
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.2
fsMplsDiffServParamsLlspPscDscp
This object specifies the PSC Dscp value if the DiffServ
Params corresponds to an llsp. This should be configured
only if fsMplsDiffServParamsServiceType is diffservllsp
Enumerationr/w
Enumerated Values:
0df
8cs1
10af1
16cs2
18af2
24cs3
26af3
32cs4
34af4
40cs5
46ef
48cs6
56cs7
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.3
fsMplsDiffServParamsElspType
This object specifies the type of ELSP if the DiffServ
Params corresponds to an elsp. This should be configured
only if fsMplsDiffServParamsServiceType is diffservelsp
Enumerationr/w
Enumerated Values:
0preconf
1sig
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.4
fsMplsDiffServParamsElspSigExpPhbMapIndex
This object specifies the index to the Elsp Map Table which
gives the Signaled EXP to PHB mapping if the DiffServ
Params corresponds to a signaled Elsp. This should be
configured only if fsMplsDiffServParamsServiceT…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.5
fsMplsDiffServParamsStatus
Specifies whether this given DiffServ Params entry is
active/notInService
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.7.2.1.6
.1.3.6.1.4.1.10876.101.1.13.1.7.3 · 1 row entry · 7 columns
The fsMplsDiffServTable allows a manager to
specify the diffServ Service-Type and the corresponding 
attributes for the Service-Type as desired for the tunnel 
when the mpls is diffServ aware.
fsMplsDiffServEntry entry .1.3.6.1.4.1.10876.101.1.13.1.7.3.1
An entry in this table represents the diffServ
Service-Type and diffServ related parameters
for the tunnel.
Indexes
MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId
Column Syntax OID
fsMplsDiffServClassType
Represents the Class-Type associated with the tunnel.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.1
fsMplsDiffServServiceType
Represents the Service-Type associated with the tunnel.
By default, it is NonDiffServ.
Enumerationr/w
Enumerated Values:
0nonDiffServLSP
1diffServElsp
2diffServLlsp
3intServLSP
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.2
fsMplsDiffServLlspPsc
If the fsMplsDiffServServiceType is set to
'DiffServLlsp', then this value identifies an entry in
the fsMplsDiffServLlspTable that gives the PSC
associated with the diffServ aware tunnel. Otherwise, this
variable s…
Enumerationr/w
Enumerated Values:
0df
8cs1
10af1
16cs2
18af2
24cs3
26af3
32cs4
34af4
40cs5
46ef
48cs6
56cs7
62ef1
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.3
fsMplsDiffServElspType
Represents whether the Elsp is signaled or
preconfigured.
Enumerationr/w
Enumerated Values:
0preconfigured
1signaled
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.4
fsMplsDiffServElspListIndex
This value corresponds to the entry in the
fsMplsDiffServElspInfoTable , which gives
the information about the PHBs and the resource
requirement for the PSC of the PHB.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.5
fsMplsDiffServRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.6
fsMplsDiffServStorageType
This variable indicates the storage type for this
object.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.4.1.10876.101.1.13.1.7.3.1.7
.1.3.6.1.4.1.10876.101.1.13.1.7.4 · 1 row entry · 6 columns
The fsMplsDiffServElspInfoTable allows a manager to
specify  the information about the PHBs and the resource 
requirement for the PSC of the PHB for the diffServ Elsp   
Tunnel.
fsMplsDiffServElspInfoEntry entry .1.3.6.1.4.1.10876.101.1.13.1.7.4.1
An entry in this table represents the
information about the PHBs and the resource
requirement for the PSC of the PHB.
Indexes
fsMplsDiffServElspInfoListIndex fsMplsDiffServElspInfoIndex
Column Syntax OID
fsMplsDiffServElspInfoListIndex
Uniquely identifies the list of the entries in the
table. This value is referred in fsMmplsDiffServEntry.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.1
fsMplsDiffServElspInfoIndex
Uniquely identifies each entry in the table.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.2
fsMplsDiffServElspInfoPHB
Represents the DSCP value of the PHB for this entry.
Enumerationr/w
Enumerated Values:
0df
8cs1
10af11
12af12
14af13
16cs2
18af21
20af22
22af23
24cs3
26af31
28af32
30af33
32cs4
34af41
36af42
38af43
40cs5
46ef
48cs6
56cs7
62ef1
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.3
fsMplsDiffServElspInfoResourcePointer
This variable represents a pointer to the traffic
parameter specification for this PSC. This
value may point at an entry in the
mplsTunnelResourceEntry to indicate which
mplsTunnelResourceEntry is to be assigned to this…
SNMPv2-TCRowPointerr/w
Textual Convention: SNMPv2-TCRowPointer ObjectIdentifier
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.4
fsMplsDiffServElspInfoRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.5
fsMplsDiffServElspInfoStorageType
This variable indicates the storage type for this object.
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
.1.3.6.1.4.1.10876.101.1.13.1.7.4.1.6
.1.3.6.1.4.1.10876.101.1.13.1.8.2 · 1 row entry · 4 columns
This table is used to configure different class types and 
bandwidth percentages for the particular class type.
fsMplsDsTeClassTypeEntry entry .1.3.6.1.4.1.10876.101.1.13.1.8.2.1
Class Type Table Entry
Indexes
fsMplsDsTeClassTypeIndex
Column Syntax OID
fsMplsDsTeClassTypeIndex
This object uniquely identifies a row in this table.
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.1
fsMplsDsTeClassTypeDescription
This object is used to provide description for the Class Type.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.2
fsMplsDsTeClassTypeRowStatus
This variable is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1) state,
no objects in that row can be modified by the agent except
fsMplsDsTeClassTypeRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.3
fsMplsDsTeClassTypeBwPercentage
This object specifies the percentage of total bandwidth of a
TE link allocated to this Class Type.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.8.2.1.4
.1.3.6.1.4.1.10876.101.1.13.1.8.3 · 1 row entry · 4 columns
This table maps the Class Type to Traffic Classes. One 
Traffic Class can belong to only one Class Type.
fsMplsDsTeClassTypeToTcMapEntry entry .1.3.6.1.4.1.10876.101.1.13.1.8.3.1
Class Type to Traffic Class Mapping Table Entry.
Indexes
fsMplsDsTeClassTypeIndex fsMplsDsTeTcIndex
Column Syntax OID
fsMplsDsTeTcIndex
This object is a secondary index to this table.
It specifies the traffic class index.
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.1
fsMplsDsTeTcType
This object specifies the traffic class value associated with this
Class Type. Traffic Class Mapping Entry.
Enumerationr/w
Enumerated Values:
0df
8cs1
10af1
16cs2
18af2
24cs3
26af3
32cs4
34af4
40cs5
46ef
48cs6
56cs7
62ef1
.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.2
fsMplsDsTeTcDescription
This object describes the traffic class mapping entry.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.3
fsMplsDsTeTcMapRowStatus
This variable is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1) state,
no objects in that row can be modified by the agent except
fsMplsDsTeTcMapRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.8.3.1.4
.1.3.6.1.4.1.10876.101.1.13.1.8.4 · 1 row entry · 4 columns
This table maps the Class Type to Priority. Each row in this 
table corresponds to a Diffserv TE Class. Each DS-TE class
is defined by associating Class Type with priority.
fsMplsDsTeTeClassEntry entry .1.3.6.1.4.1.10876.101.1.13.1.8.4.1
TE Class Table Entry
Indexes
fsMplsDsTeClassTypeIndex fsMplsDsTeTeClassPriority
Column Syntax OID
fsMplsDsTeTeClassPriority
This object specifies the preemption priority
associated with a Class-Type to form a TE-Class.
This priority will be used both as set-up and holding priority
Unsigned32
Constraints:
range: 0-7
.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.1
fsMplsDsTeTeClassDesc
This object describes the Class Type mapping with Priority.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.2
fsMplsDsTeTeClassNumber
This object specifies the TE-Class Number.
This is unique throughout the system.
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.3
fsMplsDsTeTeClassRowStatus
This variable is used to create, modify, and/or delete a row
in this table. When a row in this table is in active(1) state,
no objects in that row can be modified by the agent except
fsMplsDsTeTeClassRowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.10876.101.1.13.1.8.4.1.4
.1.3.6.1.4.1.10876.101.1.13.1.10.6 · 1 row entry · 3 columns
Information about LDP peers known by Entities in
the fsmplsLdpEntityTable.  The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for the mplsLdpSessionTable, because objects in this
table may or may not be used in session establishment.
fsMplsLdpPeerEntry entry .1.3.6.1.4.1.10876.101.1.13.1.10.6.1
Information about LDP peers known by Entities in
the fsmplsLdpEntityTable. The information in this table
is based on information from the Entity-Peer interaction
during session initialization but is not appropriate
for…
Indexes
No indexes recorded
Column Syntax OID
fsMplsLdpPeerGrReconnectTime
This object denotes the reconnect timeout value (in Seconds)
advertised by LDP peer in FT session TLV in initialization message.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.1
fsMplsLdpPeerGrRecoveryTime
This object denotes the recovery time value (in Seconds)
advertised by LDP peer in FT session TLV in initialization message.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.2
fsMplsLdpPeerGrProgressStatus
This object denotes the current State of the Peer's GR Progress.
Following are the different State of Peer's GR Progress.
1. Not started.
2. Reconnection in progress.
3. Aborted.
4. Recovery in progress.
5. Completed.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.10876.101.1.13.1.10.6.1.3