fsMplsFmDebugLevel

SUPERMICRO-MPLS-MIB · .1.3.6.1.4.1.10876.101.1.13.1.1.3
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This is a 4-byte (32-bit) object with each bit enabling/
disabling a particular type of trace/debug statement.
On setting the following bit patterns on the Least Significant
Bits of the debug object, the following type of debug statements
will be displayed
0000 0000 0000 0001 - all memory related debug statements
0000 0000 0000 0010 - all timer messages
0000 0000 0000 0100 - all semaphore related messages
0000 0000 0010 0000 - all process related messages
0000 0000 0100 0000 - all SNMP related messages
0000 0010 0000 0000 - all miscellaneous messages
0000 0100 0000 0000 - all entry exit messages
0000 1000 0000 0000 - all interface related messages
The following are the bit patterns of the Most Significant Bits
to display the above mentioned messages module-wise
0001 0000 0000 0000 - displays messages from main module
0010 0000 0000 0000 - displays interface related messages
0100 0000 0000 0000 - displays process related debug messages
The combination of all these bits will enable/disable particular
debug statement in respective modules

Context

MIB
SUPERMICRO-MPLS-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.1.1.3
Type
scalar
Access
readwrite
Status
current
Parent
fsMplsConfigObjects
Siblings
10

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Object Constraints
range: 1-10
Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsAdminStatus
The fsMpls module's administration status indicating whether it is up or down or not in service. The Admin Status can be set to only up and down whereas the upinprgrs and downinpr…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.1
fsMplsRsvpTeGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by RSVP-TE LSPs after RSVP-TE component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.10
fsMplsLdpGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by LDP LSPs after LDP component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.11
fsMplsQosPolicy
Specifies the Qos Policy to be adapted by this MPLS system. Mpls-FM, interprets the ServiceType field of IP Header, based on the Qos configured. MPLS admin status should be made d…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.2
fsMplsTeDebugLevel
This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. It Tells the level at which the Debug value is enabled Five most significant nibbles correspo…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.1.1.4
fsMplsLsrLabelAllocationMethod
For any given LSR , the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.5
fsMplsDiffServElspPreConfExpPhbMapIndex
Index to the PreConfigured EXP to PHB Mapping for ELSPs. Value of this object should be less then fsMplsDiffServElspMapEntries.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.6
fsMplsLdpEntityTable
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
table-.1.3.6.1.4.1.10876.101.1.13.1.1.7
fsMplsLdpLsrId
The Label Switching Router's Identifier. This object is a writable version of the object mplsLdpLsrId in MPLS-LDP-STD-MIB. When changing this object, the following actions take p…
scalarMPLS-TC-STD-MIBMplsLsrIdentifier.1.3.6.1.4.1.10876.101.1.13.1.1.8
fsMplsLdpForceOption
This object is currently used only in conjunction with the object fsMplsLdpLsrId. If this object is set to true(1), Label Switching Router's Identifier when configured…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.1.1.9