fsMplsLdpLsrId

SUPERMICRO-MPLS-MIB · .1.3.6.1.4.1.10876.101.1.13.1.1.8
MIB view Table view

Object

scalar r/w MPLS-TC-STD-MIBMplsLsrIdentifier 
The Label Switching Router's Identifier. This object is a 
writable version of the object mplsLdpLsrId in
MPLS-LDP-STD-MIB. When changing this object, the following
actions take place.
          
Validation of the object fsMplsLdpForceOption is done.
          
1. If fsMplsLdpForceOption is set to true(1), the value 
   passed is immediately applied to this object and
   retriggering of LDP sessions is done immediately.
          
2. If fsMplsLdpForceOption is set to false(2), the value
   passed is stored in temporary variable. Once the 
   interface associated with the current active LDP LSR ID
   goes down operationally, the value stored temporarily is
   copied into the object and retriggering of LDP Sessions
   is done. 
          
The error WrongValue is thrown if configured IP Address does
not exist in the system.
          
The error InconsistentValue is thrown if the interface 
of the configured IP Addresss is currently operationally
down.

Context

MIB
SUPERMICRO-MPLS-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.1.1.8
Type
scalar
Access
readwrite
Status
current
Parent
fsMplsConfigObjects
Siblings
10

Syntax

MPLS-TC-STD-MIBMplsLsrIdentifier
Source
MPLS-TC-STD-MIBMplsLsrIdentifier
Base type
OctetString

Values & Constraints

Object Constraints
range: 8-8
Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsAdminStatus
The fsMpls module's administration status indicating whether it is up or down or not in service. The Admin Status can be set to only up and down whereas the upinprgrs and downinpr…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.1
fsMplsRsvpTeGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by RSVP-TE LSPs after RSVP-TE component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.10
fsMplsLdpGrMaxWaitTime
This object denotes the time period (in seconds) till which router should retain its Forwarding Table Entries created by LDP LSPs after LDP component is restarted.
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.11
fsMplsQosPolicy
Specifies the Qos Policy to be adapted by this MPLS system. Mpls-FM, interprets the ServiceType field of IP Header, based on the Qos configured. MPLS admin status should be made d…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.2
fsMplsFmDebugLevel
This is a 4-byte (32-bit) object with each bit enabling/ disabling a particular type of trace/debug statement. On setting the following bit patterns on the Least Significant Bits …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.3
fsMplsTeDebugLevel
This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. It Tells the level at which the Debug value is enabled Five most significant nibbles correspo…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.1.1.4
fsMplsLsrLabelAllocationMethod
For any given LSR , the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.13.1.1.5
fsMplsDiffServElspPreConfExpPhbMapIndex
Index to the PreConfigured EXP to PHB Mapping for ELSPs. Value of this object should be less then fsMplsDiffServElspMapEntries.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.13.1.1.6
fsMplsLdpEntityTable
This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR).
table-.1.3.6.1.4.1.10876.101.1.13.1.1.7
fsMplsLdpForceOption
This object is currently used only in conjunction with the object fsMplsLdpLsrId. If this object is set to true(1), Label Switching Router's Identifier when configured…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.1.1.9