powerSaverMode
SDEVICE-MIB ·
.1.3.6.1.4.1.31034.2.7.1.6
Object
scalar
r/w
Seconds
Set backlight on time in seconds; 0 keeps display always on. Note that keeping the backlight on may decrease luminosity over time. Setting this to other values than 10, 60, 120 or 240 is incompatible with the gateway!
Context
- MIB
- SDEVICE-MIB
- OID
.1.3.6.1.4.1.31034.2.7.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- general
- Siblings
- 8
Syntax
Seconds
- Source
- Seconds
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| localAlertReset Allow alerts to be reset locally on device by pushing one of
the buttons. [replaces dipDuration] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.31034.2.7.1.10 |
| currentDropDetection Enables the current drop detection function. 0 = always off
(default), 1 = input (s) only, 2 = output(s) only, 3 = both
inputs and outputs. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.11 |
| wirelessDisplayPower Controls the transit power of the wireless display transciever
(if installed). Set to zero to completely disable the module. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.31034.2.7.1.12 |
| peakDuration A current peak should last at least [stpkdr] MilliSeconds
before an alert is raised; max about a minute. | scalar | MilliSeconds | .1.3.6.1.4.1.31034.2.7.1.4 |
| fixedOutletDelay Minimal delay between two successive relay switches in
milliseconds. Minimal delay is 100 ms. Will always be
respected! | scalar | MilliSeconds | .1.3.6.1.4.1.31034.2.7.1.5 |
| outletPowerupMode Behaviour of outlet on power-up: 0=off; 1=same state as at
power down; 2=same state, but delayed by individual delay
timer. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.7 |
| maximumTemperature An alert should be generated whenever the temperature of the
first connected T sensor is above this value. Zero means
disabled. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.8 |
| displayOrientation 0 no display; display off; 1 vertical, display on top; 2
vertical, upside down; 3 horizontal, display at left; 4
horizontal, display at right | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.9 |