SDEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

inputmeasuresTable

table

.1.3.6.1.4.1.31034.2.8 · 1 row entry · 13 columns

Open in standard view

This table contains all measures related to the measured
inputs of the DEVICE. Note: either 1 or 3 channels, depending
on number of phases measured.

inputmeasuresEntry entry .1.3.6.1.4.1.31034.2.8.1

The record containing the registers for the channel selected
by channelIndex.

Indexes

channelIndex6

Column	Syntax	OID
channelIndex6 The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.	Integer32 Constraints: `range: 1-48`	`.1.3.6.1.4.1.31034.2.8.1.1`
kWhTotalI Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement.	KiloWattHour Textual Convention: KiloWattHour `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.2`
kWhSubtotalI kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement. Reset to zero with [rsimks].	KiloWattHour Textual Convention: KiloWattHour `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.3`
powerFactorI The effective power factor in percent.	DeciPowerFactor Textual Convention: DeciPowerFactor `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.4`
actualCurrentI Actual apparent, RMS current.	DeciAmps Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.5`
peakCurrentI Peak apparent, RMS current; highest value since last reset of the alerts.	DeciAmps Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.6`
actualVoltageI The actual voltage.	DeciVolts Textual Convention: DeciVolts `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.7`
minVoltageI RMS voltage dip; lowest value since reset of alerts.	DeciVolts Textual Convention: DeciVolts `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.8`
powerVAI Power value calculated, not in data model of device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31034.2.8.1.9`
powerWattI Power value calculated by the gateway, not in data model of device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31034.2.8.1.10`
maxInletAmps Maximum current per input phase in A; should last at least [stpkdr] MilliSeconds before triggering an alert.	DeciAmpsr/w Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.8.1.11`
inputCTratio The multiplier to use in case of use of /5 current transformers. Defaults to 1.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31034.2.8.1.12`
inputName User configurable naming of inputs or phases. Useful if channels are used to measure branches..	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.31034.2.8.1.13`

outletsTable

table

.1.3.6.1.4.1.31034.2.9 · 1 row entry · 2 columns

Open in standard view

This table contains the customer specific settings,
determining toutlestablehe behaviour of the DEVICE.

outletsEntry entry .1.3.6.1.4.1.31034.2.9.1

The record containing the registers forthe channel selected by
channelIndex.

Indexes

channelIndex4

Column	Syntax	OID
channelIndex4 The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.	Integer32 Constraints: `range: 1-48`	`.1.3.6.1.4.1.31034.2.9.1.1`
outletName User configurable naming of individual outlets. Useful to distinguish outlets based on customer or device name.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.31034.2.9.1.2`

outputmeasuresTable

table

.1.3.6.1.4.1.31034.2.10 · 1 row entry · 9 columns

Open in standard view

This table contains all measures related to the measured
outputs of the DEVICE. Note: up to 48 channels, depending on
number of measured outlets.

outputmeasuresEntry entry .1.3.6.1.4.1.31034.2.10.1

The record containing the registers for the channel selected
by channelIndex.

Indexes

channelIndex7

Column	Syntax	OID
channelIndex7 The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.	Integer32 Constraints: `range: 1-48`	`.1.3.6.1.4.1.31034.2.10.1.1`
kWhTotalO Total kWh of selected output.	KiloWattHour Textual Convention: KiloWattHour `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.2`
kWhSubtotalO kWh subtotal register of selected output. Reset to zero with [rsomks].	KiloWattHour Textual Convention: KiloWattHour `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.3`
powerFactorO Power factor of output.	DeciPowerFactor Textual Convention: DeciPowerFactor `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.4`
actualCurrentO Actual apparent, RMS current.	DeciAmps Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.5`
peakCurrentO Peak apparent, RMS current; highest value since last reset of alerts.	DeciAmps Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.6`
actualVoltageO Actual voltage on output.	DeciVolts Textual Convention: DeciVolts `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.7`
maxOutletAmps Maximum current per outlet in A; should last at least [stpkdr] MilliSeconds before triggering an alert.	DeciAmpsr/w Textual Convention: DeciAmps `Integer32`	`.1.3.6.1.4.1.31034.2.10.1.8`
outputCTratio The multiplier to use in case of use of /5 current transformers. Defaults to 1.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31034.2.10.1.9`

switchedoutletsTable

table

.1.3.6.1.4.1.31034.2.11 · 1 row entry · 5 columns

Open in standard view

This table contains the current status of switchable
DEVICE's.

switchedoutletsEntry entry .1.3.6.1.4.1.31034.2.11.1

The record containing the registers for the channel selected
by channelIndex.

Indexes

channelIndex5

Column	Syntax	OID
channelIndex5 The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.	Integer32 Constraints: `range: 1-48`	`.1.3.6.1.4.1.31034.2.11.1.1`
currentState The actual state of the outlet relays. The hardware will contain max 48 outlets. Writing is only effective after setting [swounl].	Integer32r/w Constraints: `range: 0-1`	`.1.3.6.1.4.1.31034.2.11.1.2`
scheduled A one indicates pending activity; the switch delay has not yet expired.	Integer32 Constraints: `range: 0-1`	`.1.3.6.1.4.1.31034.2.11.1.3`
unlock Setting the value to one will release the safety for this outlet for a couple seconds; switching and rebooting are then temporarily enabled.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.31034.2.11.1.4`
individualOutletDelay Delay before an individual outlet switches on at power-up in Seconds.	Secondsr/w Textual Convention: Seconds `Integer32`	`.1.3.6.1.4.1.31034.2.11.1.5`

sensorTable

table

.1.3.6.1.4.1.31034.2.12 · 1 row entry · 4 columns

Open in standard view

This table contains the environmental measurements. As well
internal temperature as external temperature probes.

sensorEntry entry .1.3.6.1.4.1.31034.2.12.1

The record containing the registers for the channel selected
by channelIndex.

Indexes

channelIndex8

Column	Syntax	OID
channelIndex8 The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.	Integer32 Constraints: `range: 1-48`	`.1.3.6.1.4.1.31034.2.12.1.1`
sensorType Type of connected sensor, either T, H or I for respectively Temperature (C), Humidity (%) or dry switch contact	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.31034.2.12.1.2`
sensorValue Value of connected sensor	DeciValue Textual Convention: DeciValue `Integer32`	`.1.3.6.1.4.1.31034.2.12.1.3`
sensorName User definable name for sensors.	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.31034.2.12.1.4`