peakDuration
SDEVICE-MIB ·
.1.3.6.1.4.1.31034.2.7.1.4
Object
scalar
r/w
MilliSeconds
A current peak should last at least [stpkdr] MilliSeconds before an alert is raised; max about a minute.
Context
- MIB
- SDEVICE-MIB
- OID
.1.3.6.1.4.1.31034.2.7.1.4- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- general
- Siblings
- 8
Syntax
MilliSeconds
- Source
- MilliSeconds
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| localAlertReset Allow alerts to be reset locally on device by pushing one of
the buttons. [replaces dipDuration] | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.31034.2.7.1.10 |
| currentDropDetection Enables the current drop detection function. 0 = always off
(default), 1 = input (s) only, 2 = output(s) only, 3 = both
inputs and outputs. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.11 |
| wirelessDisplayPower Controls the transit power of the wireless display transciever
(if installed). Set to zero to completely disable the module. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.31034.2.7.1.12 |
| fixedOutletDelay Minimal delay between two successive relay switches in
milliseconds. Minimal delay is 100 ms. Will always be
respected! | scalar | MilliSeconds | .1.3.6.1.4.1.31034.2.7.1.5 |
| powerSaverMode Set backlight on time in seconds; 0 keeps display always on.
Note that keeping the backlight on may decrease luminosity over
time. Setting this to other values than 10, 60, 120 or… | scalar | Seconds | .1.3.6.1.4.1.31034.2.7.1.6 |
| outletPowerupMode Behaviour of outlet on power-up: 0=off; 1=same state as at
power down; 2=same state, but delayed by individual delay
timer. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.7 |
| maximumTemperature An alert should be generated whenever the temperature of the
first connected T sensor is above this value. Zero means
disabled. | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.8 |
| displayOrientation 0 no display; display off; 1 vertical, display on top; 2
vertical, upside down; 3 horizontal, display at left; 4
horizontal, display at right | scalar | Integer32 | .1.3.6.1.4.1.31034.2.7.1.9 |