ruckusWLANRateShaper

RUCKUS-WLAN-MIB · .1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.17
MIB view Table view

Object

column r/w OctetString 
This is controls fair access to the network. When enabled, the network traffic throughput 
of each network device is limited to the rate specified in the traffic policy. Configuration format 
(uplink/downlink)mbps or unlimited. Support values: 0.10mbps 0.25mbps 0.50mbps 0.75mbps 1.00mbps 1.25mbps 1.50mbps 1.75mbps 
2.00mbps 2.25mbps 2.50mbps 2.75mbps 3.00mbps 3.25mbps 3.50mbps 3.75mbps 4.00mbps 4.25mbps 4.50mbps 4.75mbps 5.00mbps 5.25mbps 5.50mbps 
5.75mbps 6.00mbps 6.25mbps 6.50mbps 6.75mbps 7.00mbps 7.25mbps 7.50mbps 7.75mbps 8.00mbps 8.25mbps 8.50mbps 8.75mbps 9.00mbps 9.25mbps 
9.50mbps 9.75mbps 10.00mbps 10.25mbps 10.50mbps 10.75mbps 11.00mbps 11.25mbps 11.50mbps 11.75mbps 12.00mbps 12.25mbps 12.50mbps 
12.75mbps 13.00mbps 13.25mbps 13.50mbps 13.75mbps 14.00mbps 14.25mbps 14.50mbps 14.75mbps 15.00mbps 15.25mbps 15.50mbps 15.75mbps 
16.00mbps 16.25mbps 16.50mbps 16.75mbps 17.00mbps 17.25mbps 17.50mbps 17.75mbps 18.00mbps 18.25mbps 18.50mbps 18.75mbps 19.00mbps 
19.25mbps 19.50mbps 19.75mbps 20.00mbps

Context

MIB
RUCKUS-WLAN-MIB
OID
.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.17
Type
column
Access
readwrite
Status
current
Parent
ruckusWLANEntry
Table
ruckusWLANTable
Siblings
18

Syntax

OctetString

Values & Constraints

Object Constraints
range: 1-31

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusWLANSSID
Specifies the name of the SSID.
columnRUCKUS-TC-MIBRuckusSSID.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.1
ruckusWLANChannel
Specifies the current operating channel.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.10
ruckusWLANWDSEnable
Specifies if the WDS is enabled or disabled on this interface. Allow 4 address mode of operation for an given WLAN interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.11
ruckusWLANAdminStatus
Administrative status of the WLAN interface.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.12
ruckusWLANProtectionMode
Enabled when 11g and 11b clients exist on the same network. none: Do not use any protection ctsOnly: AP will send a CTS frame prior to sending 11g frames. The CTS f…
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.13
ruckusWLANName
Specifies the name of the wlan.
columnOctetString.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.14
ruckusWLANSSIDBcastDisable
Setting to 1, cause the ssid will not be broadcast in the beacons.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.15
ruckusWLANVlanID
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.16
ruckusWLANBSSID
This attribute is the unique identifier in this BSS. It is the 48-bit MAC address of the wireless interface.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.2
ruckusWLANIfIndex
Interface index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.200
ruckusWLANIGMPSnooping
Configure the IGMPSnooping for this WLAN.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.25
ruckusWLANBSSType
Specifies the bss type.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.3
ruckusWLANOperationalRateSet
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range f…
columnOctetString.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4
ruckusWLANBeaconPeriod
This attribute shall specify the number of milli seconds that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frame…
columnmilli seconds Integer32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.5
ruckusWLANDTIMPeriod
This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.6
ruckusWLANRTSThreshold
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross modulation protection …
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.7
ruckusWLANFragmentationThreshold
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the valu…
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.8
ruckusWLANRadioMode
Specifies the radio mode.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.9