ruckusWLANProtectionMode

RUCKUS-WLAN-MIB · .1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.13

MIB view Table view

Object

column Enumeration

Enabled when 11g and 11b clients exist on the same network.
none:
Do not use any protection
              
ctsOnly:
AP will send a CTS frame prior to sending 11g frames.
The CTS frame will silence 11b clients
              
rtsCts:
Require RTS to be sent by sender of 11g frame and responder
to send CTS prior to any 11g frames being sent.

Context

MIB: RUCKUS-WLAN-MIB
OID: .1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.13
Type: column
Access: readonly
Status: current
Parent: ruckusWLANEntry
Table: ruckusWLANTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	ctsOnly
`3`	ctsRts

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ruckusWLANSSID Specifies the name of the SSID.	column	RUCKUS-TC-MIBRuckusSSID	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.1`
ruckusWLANChannel Specifies the current operating channel.	column	Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.10`
ruckusWLANWDSEnable Specifies if the WDS is enabled or disabled on this interface. Allow 4 address mode of operation for an given WLAN interface.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.11`
ruckusWLANAdminStatus Administrative status of the WLAN interface.	column	Enumeration	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.12`
ruckusWLANName Specifies the name of the wlan.	column	OctetString	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.14`
ruckusWLANSSIDBcastDisable Setting to 1, cause the ssid will not be broadcast in the beacons.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.15`
ruckusWLANVlanID Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.	column	Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.16`
ruckusWLANRateShaper This is controls fair access to the network. When enabled, the network traffic throughput of each network device is limited to the rate specified in the traffic policy. Configura…	column	OctetString	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.17`
ruckusWLANBSSID This attribute is the unique identifier in this BSS. It is the 48-bit MAC address of the wireless interface.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.2`
ruckusWLANIfIndex Interface index.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.200`
ruckusWLANIGMPSnooping Configure the IGMPSnooping for this WLAN.	column	Enumeration	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.25`
ruckusWLANBSSType Specifies the bss type.	column	Enumeration	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.3`
ruckusWLANOperationalRateSet This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range f…	column	OctetString	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4`
ruckusWLANBeaconPeriod This attribute shall specify the number of milli seconds that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frame…	column	milli seconds Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.5`
ruckusWLANDTIMPeriod This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.	column	Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.6`
ruckusWLANRTSThreshold This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross modulation protection …	column	Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.7`
ruckusWLANFragmentationThreshold This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the valu…	column	Integer32	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.8`
ruckusWLANRadioMode Specifies the radio mode.	column	Enumeration	`.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.9`