ruckusWLANRadioMode

RUCKUS-WLAN-MIB · .1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.9
MIB view Table view

Object

column Enumeration 
Specifies the radio mode.

Context

MIB
RUCKUS-WLAN-MIB
OID
.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.9
Type
column
Access
readonly
Status
current
Parent
ruckusWLANEntry
Table
ruckusWLANTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ieee802dot11b
2ieee802dot11g
3auto
4ieee802dot11a
5ieee802dot11ng
6ieee802dot11na
7ieee802dot11ac
8ieee802dot11ax

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusWLANSSID
Specifies the name of the SSID.
columnRUCKUS-TC-MIBRuckusSSID.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.1
ruckusWLANChannel
Specifies the current operating channel.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.10
ruckusWLANWDSEnable
Specifies if the WDS is enabled or disabled on this interface. Allow 4 address mode of operation for an given WLAN interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.11
ruckusWLANAdminStatus
Administrative status of the WLAN interface.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.12
ruckusWLANProtectionMode
Enabled when 11g and 11b clients exist on the same network. none: Do not use any protection ctsOnly: AP will send a CTS frame prior to sending 11g frames. The CTS f…
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.13
ruckusWLANName
Specifies the name of the wlan.
columnOctetString.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.14
ruckusWLANSSIDBcastDisable
Setting to 1, cause the ssid will not be broadcast in the beacons.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.15
ruckusWLANVlanID
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.16
ruckusWLANRateShaper
This is controls fair access to the network. When enabled, the network traffic throughput of each network device is limited to the rate specified in the traffic policy. Configura…
columnOctetString.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.17
ruckusWLANBSSID
This attribute is the unique identifier in this BSS. It is the 48-bit MAC address of the wireless interface.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.2
ruckusWLANIfIndex
Interface index.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.200
ruckusWLANIGMPSnooping
Configure the IGMPSnooping for this WLAN.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.25
ruckusWLANBSSType
Specifies the bss type.
columnEnumeration.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.3
ruckusWLANOperationalRateSet
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range f…
columnOctetString.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4
ruckusWLANBeaconPeriod
This attribute shall specify the number of milli seconds that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frame…
columnmilli seconds Integer32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.5
ruckusWLANDTIMPeriod
This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.6
ruckusWLANRTSThreshold
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross modulation protection …
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.7
ruckusWLANFragmentationThreshold
This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY. An MSDU shall be broken into fragments if its size exceeds the valu…
columnInteger32.1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.8