rcTlsTestTdcScheduled

RC-TLS-MIB · .1.3.6.1.4.1.2272.1.52.1.1.1.1.44
MIB view Table view

Object

column SNMPv2-TCTruthValue 
Indicates whether this test is currently scheduled to execute in periodic mode.
A TRUE response indicates the test is scheduled to run at some future time, and will
execute as scheduled unless manually aborted.

Context

MIB
RC-TLS-MIB
OID
.1.3.6.1.4.1.2272.1.52.1.1.1.1.44
Type
column
Access
readonly
Status
current
Parent
rcTlsTestTdcEntry
Table
rcTlsTestTdcTable
Siblings
45

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcTlsTestTdcTestId
The unique TDC test ID for this entry.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.1
rcTlsTestTdcTestType
Optional target address of the TDC test. For tlsl2 protocol, the options are broadcast and unicast, broadcast only and unicast only. For oel2 protocol, the options are multicast a…
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.10
rcTlsTestTdcTimeTrace
Optional data associated with the TDC test. The basic test validates the provisioning associated with the source ports, destination ports and TDs configured in the test. The time …
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.11
rcTlsTestTdcPriority
Boolean value indicating whether the user specified the packet priority or not.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.52.1.1.1.1.12
rcTlsTestTdcPktsSent
The number of test packets sent.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.13
rcTlsTestTdcPktsReceived
The number of test packets received.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.14
rcTlsTestTdcRttBroadcast
The round-trip-time of the last broadcast test packet in microseconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.15
rcTlsTestTdcRttUnicast
The round-trip-time of the last unicast test packet in microseconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.16
rcTlsTestTdcPriOpePkt
The OPE network priority. (ie. Customer priority mapped into an OPE priority. Same as tlsTDPriority-Map.)
columnOctetString.1.3.6.1.4.1.2272.1.52.1.1.1.1.17
rcTlsTestTdcTestDate
The local date stamp for the test (DD/MM).
columnOctetString.1.3.6.1.4.1.2272.1.52.1.1.1.1.18
rcTlsTestTdcTestTime
The local time-of-day stamp for the test (HH:MM:SS).
columnOctetString.1.3.6.1.4.1.2272.1.52.1.1.1.1.19
rcTlsTestTdcTDI
The customer TD on which this test is executed.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.2
rcTlsTestTdcTraceInfo
Boolean value indicating whether the trace info exists for this entry.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.52.1.1.1.1.20
rcTlsTestTdcRowStatus
Used to create/delete an entry in this table
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.52.1.1.1.1.21
rcTlsTestTdcAction
This action controls test execution: start will exe-cute the test one time; startPeriodic will begin periodic execution of a test; abort termi-nates the test if it is currently …
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.22
rcTlsTestTdcResult
Result from the last TDC action
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.23
rcTlsTestTdcErrorMask
The error mask associated with the TDC test. Each bit in the mask represents a specific error. The errors from least significant bit to highest significant bit are: bit 1 - TD no…
columnBits.1.3.6.1.4.1.2272.1.52.1.1.1.1.24
rcTlsTestTdcName
An optional user-defined name for this test. A TDC test name must be unique for each test.
columnOctetString.1.3.6.1.4.1.2272.1.52.1.1.1.1.25
rcTlsTestTdcMulticastCnt
The number of multicast messages sent with each test. A value of zero(0) means the test will look at the FDB for a valid entry, and if one exists a multicast packet will not be se…
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.26
rcTlsTestTdcUnicastCnt
The number of unicast messages sent with each test.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.27
rcTlsTestTdcRepeatCnt
The number of times a message sequence is executed per test.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.28
rcTlsTestTdcPeriodicRate
Used to set a periodic test rate. The time is in minutes. The time period ranges from once-a-minute (1) to once-a-day (1440). A time of zero will cause an error indication if a…
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.29
rcTlsTestTdcSrcPortNum
An index value that uniquely identifies the TLS interface (UNI port) at the source of the test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.3
rcTlsTestTdcPeriodicCount
This object allows the user to place a limit on the number of times a test running periodically shall run. - 0 : Run indefinitely at the periodic rate set via rcTlsTestTdcPeriodi…
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.30
rcTlsTestTdcHistoryCnt
The number of results to be saved for a given TDC test. The maximum number of results which may be saved by a given device is obtainable via rcTlsTestTdcHistoryMax. The total am…
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.31
rcTlsTestTdcRttThreshold
The number of milliseconds allowed for a message to make a round trip journey. Exceeding this threshold can cause the generation of an SNMP rcTlsTestTdcTestFailure event, but will…
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.32
rcTlsTestTdcSnmpTrapControl
Enable or disable the generation of the rcTlsTestTdcTestFailure SNMP trap for this test.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.52.1.1.1.1.33
rcTlsTestTdcRttBroadcastMin
The minimum round-trip-time, in microseconds, required by a broadcast test packet over for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.34
rcTlsTestTdcRttBroadcastMax
The maximum round-trip-time, in microseconds, required by a broadcast test packet for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.35
rcTlsTestTdcRttBroadcastAvg
The average round-trip-time for a broadcast test packet in microseconds for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.36
rcTlsTestTdcRttUnicastMin
The minimum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.37
rcTlsTestTdcRttUnicastMax
The maximum round-trip-time, in microseconds, required by a unicast test packet for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.38
rcTlsTestTdcRttUnicastAvg
The average round-trip-time for a unicast test packet in microseconds for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.39
rcTlsTestTdcDstPortNum
An index value that uniquely identifies the destination TLS interface (LAN port).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.4
rcTlsTestTdcHopCountMin
The minimum hop count for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.40
rcTlsTestTdcHopCountMax
The maximum hop count for all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.41
rcTlsTestTdcHopCountAvg
The average hop count all executions of this test.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.42
rcTlsTestTdcClearHistoryAction
The clear option removes all stored test results for this test including the most recent test result. The clear option has no affect if there are no stored results. A query of th…
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.43
rcTlsTestTdcCurrentPeriodicCount
This object returns the current value of the periodic counter. If the value had been set greater than zero and the test is currently running periodically, then this object is dec…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.45
rcTlsTestTdcQtag
TDC test Qtag, it is 0 by default. It means the first Qtag of the Tls Endpoint
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.46
rcTlsTestTdcSrcPortIP
The IP address of the source port or CPU.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.52.1.1.1.1.5
rcTlsTestTdcDstPortIP
The IP address of the destination port or CPU.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.52.1.1.1.1.6
rcTlsTestTdcPktPriority
Optional 802.1 network priority to be used for this test. If not specified by the user, the port default priority is assumed.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.7
rcTlsTestTdcPktTimeout
Optional timeout period for the TDC test in seconds. If not specified, a default value of 10 seconds will be used.
columnInteger32.1.3.6.1.4.1.2272.1.52.1.1.1.1.8
rcTlsTestTdcProtocol
The protocol to use for the TDC test. If not specified by the user, the mode (protocol) of the source UNI port will be assumed.
columnEnumeration.1.3.6.1.4.1.2272.1.52.1.1.1.1.9