rcTlsTestTdcPktTimeout
RC-TLS-MIB ·
.1.3.6.1.4.1.2272.1.52.1.1.1.1.8
Object
column
r/w
Integer32
Optional timeout period for the TDC test in seconds. If not specified, a default value of 10 seconds will be used.
Context
- MIB
- RC-TLS-MIB
- OID
.1.3.6.1.4.1.2272.1.52.1.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcTlsTestTdcEntry
- Table
- rcTlsTestTdcTable
- Siblings
- 45
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-120
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcTlsTestTdcTestId The unique TDC test ID for this entry. | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.1 |
| rcTlsTestTdcTestType Optional target address of the TDC test. For tlsl2
protocol, the options are broadcast and unicast,
broadcast only and unicast only. For oel2 protocol,
the options are multicast a… | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.10 |
| rcTlsTestTdcTimeTrace Optional data associated with the TDC test. The
basic test validates the provisioning associated with
the source ports, destination ports and TDs configured
in the test. The time … | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.11 |
| rcTlsTestTdcPriority Boolean value indicating whether the user
specified the packet priority or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.52.1.1.1.1.12 |
| rcTlsTestTdcPktsSent The number of test packets sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.13 |
| rcTlsTestTdcPktsReceived The number of test packets received. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.14 |
| rcTlsTestTdcRttBroadcast The round-trip-time of the last broadcast test
packet in microseconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.15 |
| rcTlsTestTdcRttUnicast The round-trip-time of the last unicast test
packet in microseconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.16 |
| rcTlsTestTdcPriOpePkt The OPE network priority. (ie. Customer priority
mapped into an OPE priority. Same as tlsTDPriority-Map.) | column | OctetString | .1.3.6.1.4.1.2272.1.52.1.1.1.1.17 |
| rcTlsTestTdcTestDate The local date stamp for the test (DD/MM). | column | OctetString | .1.3.6.1.4.1.2272.1.52.1.1.1.1.18 |
| rcTlsTestTdcTestTime The local time-of-day stamp for the test (HH:MM:SS). | column | OctetString | .1.3.6.1.4.1.2272.1.52.1.1.1.1.19 |
| rcTlsTestTdcTDI The customer TD on which this test is executed. | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.2 |
| rcTlsTestTdcTraceInfo Boolean value indicating whether the trace info
exists for this entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.52.1.1.1.1.20 |
| rcTlsTestTdcRowStatus Used to create/delete an entry in this table | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.52.1.1.1.1.21 |
| rcTlsTestTdcAction This action controls test execution: start will exe-cute the test one time;
startPeriodic will begin periodic execution of a test;
abort termi-nates the test if it is currently … | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.22 |
| rcTlsTestTdcResult Result from the last TDC action | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.23 |
| rcTlsTestTdcErrorMask The error mask associated with the TDC test. Each bit
in the mask represents a specific error. The errors
from least significant bit to highest significant bit
are:
bit 1 - TD no… | column | Bits | .1.3.6.1.4.1.2272.1.52.1.1.1.1.24 |
| rcTlsTestTdcName An optional user-defined name for this test. A TDC
test name must be unique for each test. | column | OctetString | .1.3.6.1.4.1.2272.1.52.1.1.1.1.25 |
| rcTlsTestTdcMulticastCnt The number of multicast messages sent with each test.
A value of zero(0) means the test will look at the FDB
for a valid entry, and if one exists a multicast packet
will not be se… | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.26 |
| rcTlsTestTdcUnicastCnt The number of unicast messages sent with each test. | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.27 |
| rcTlsTestTdcRepeatCnt The number of times a message sequence is executed per
test. | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.28 |
| rcTlsTestTdcPeriodicRate Used to set a periodic test rate. The time is
in minutes. The time period ranges from once-a-minute (1) to once-a-day (1440). A time
of zero will cause an error indication if a… | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.29 |
| rcTlsTestTdcSrcPortNum An index value that uniquely identifies the TLS
interface (UNI port) at the source of the test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.3 |
| rcTlsTestTdcPeriodicCount This object allows the user to place a limit on the number of times
a test running periodically shall run.
- 0 : Run indefinitely at the periodic rate set via rcTlsTestTdcPeriodi… | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.30 |
| rcTlsTestTdcHistoryCnt The number of results to be saved for a given TDC test. The
maximum number of results which may be saved by a given device is
obtainable via rcTlsTestTdcHistoryMax.
The total am… | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.31 |
| rcTlsTestTdcRttThreshold The number of milliseconds allowed for a message to
make a round trip journey. Exceeding this threshold can
cause the generation of an SNMP rcTlsTestTdcTestFailure
event, but will… | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.32 |
| rcTlsTestTdcSnmpTrapControl Enable or disable the generation of the
rcTlsTestTdcTestFailure SNMP trap for this test. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.52.1.1.1.1.33 |
| rcTlsTestTdcRttBroadcastMin The minimum round-trip-time, in microseconds,
required by a broadcast test packet over for all
executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.34 |
| rcTlsTestTdcRttBroadcastMax The maximum round-trip-time, in microseconds,
required by a broadcast test packet for all
executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.35 |
| rcTlsTestTdcRttBroadcastAvg The average round-trip-time for a broadcast test
packet in microseconds for all executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.36 |
| rcTlsTestTdcRttUnicastMin The minimum round-trip-time, in microseconds,
required by a unicast test packet for all
executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.37 |
| rcTlsTestTdcRttUnicastMax The maximum round-trip-time, in microseconds,
required by a unicast test packet for all
executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.38 |
| rcTlsTestTdcRttUnicastAvg The average round-trip-time for a unicast test
packet in microseconds for all executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.39 |
| rcTlsTestTdcDstPortNum An index value that uniquely identifies the
destination TLS interface (LAN port). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.4 |
| rcTlsTestTdcHopCountMin The minimum hop count for all executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.40 |
| rcTlsTestTdcHopCountMax The maximum hop count for all executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.41 |
| rcTlsTestTdcHopCountAvg The average hop count all executions of this test. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.42 |
| rcTlsTestTdcClearHistoryAction The clear option removes all stored test results for
this test including the most recent test result. The clear option has no
affect if there are no stored results. A query of th… | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.43 |
| rcTlsTestTdcScheduled Indicates whether this test is currently scheduled to execute in periodic mode.
A TRUE response indicates the test is scheduled to run at some future time, and will
execute as sch… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.52.1.1.1.1.44 |
| rcTlsTestTdcCurrentPeriodicCount This object returns the current value of the periodic counter. If the value had been
set greater than zero and the test is currently running periodically, then this object
is dec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.45 |
| rcTlsTestTdcQtag TDC test Qtag, it is 0 by default. It means the first
Qtag of the Tls Endpoint | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.46 |
| rcTlsTestTdcSrcPortIP The IP address of the source port or CPU. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.52.1.1.1.1.5 |
| rcTlsTestTdcDstPortIP The IP address of the destination port or CPU. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.52.1.1.1.1.6 |
| rcTlsTestTdcPktPriority Optional 802.1 network priority to be used for
this test. If not specified by the user, the port
default priority is assumed. | column | Integer32 | .1.3.6.1.4.1.2272.1.52.1.1.1.1.7 |
| rcTlsTestTdcProtocol The protocol to use for the TDC test. If not
specified by the user, the mode (protocol) of the
source UNI port will be assumed. | column | Enumeration | .1.3.6.1.4.1.2272.1.52.1.1.1.1.9 |