rcIpv6RouterAdvertUseDefaultVal

RC-IPV6-MIB · .1.3.6.1.4.1.2272.1.62.1.1.5.1.3

MIB view Table view

Object

column r/w Enumeration

Select one of the value to set/use it's
value to default value, or set all the bits
to indicate all the options will be set to 
their default value.

Context

MIB: RC-IPV6-MIB
OID: .1.3.6.1.4.1.2272.1.62.1.1.5.1.3
Type: column
Access: readwrite
Status: current
Parent: rcIpv6RouterAdvertEntry
Table: rcIpv6RouterAdvertTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	send-advertisement
`3`	max-interval
`4`	min-interval
`5`	default-life-time
`6`	hop-limit
`7`	managed-flag
`8`	other-config-flag
`9`	dad-ns-num
`10`	linkMtu
`11`	reachableTime
`12`	retransmitTime

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rcIpv6RouterAdvertIfIndex An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.1`
rcIpv6RouterAdvertManagedFlag if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.10`
rcIpv6RouterAdvertOtherConfigFlag if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.11`
rcIpv6RouterAdvertDadNsNum The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is used to send one adve…	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.12`
rcIpv6RouterAdvertLinkMTU The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6.2.1	column	Unsigned32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.13`
rcIpv6RouterAdvertRetransmitTime The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero mea…	column	Unsigned32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.14`
rcIpv6RouterAdvertSendAdverts A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Section 6.2.1	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.2`
rcIpv6RouterAdvertMaxInterval Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 180…	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.4`
rcIpv6RouterAdvertMinInterval Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and no greater than .75…	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.5`
rcIpv6RouterAdvertReachableTime The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). …	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.6`
rcIpv6RouterAdvertRetransmitTimer deprecated The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero mea…	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.7`
rcIpv6RouterAdvertDefaultLifeTime The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and 90…	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.8`
rcIpv6RouterAdvertCurHopLimit The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. …	column	Integer32	`.1.3.6.1.4.1.2272.1.62.1.1.5.1.9`