rcIpv6RouterAdvertRetransmitTime

RC-IPV6-MIB · .1.3.6.1.4.1.2272.1.62.1.1.5.1.14
MIB view Table view

Object

column r/w Unsigned32 
The value (in milliseconds) to be placed                               in the retransmit timer field in router 
advertisement message sent from this 
interface. The value zero means 
unspecified (by this router). Used to 
configure the amount of time that router
should wait for the transmit to occur.
REFERENCE RFC2461 Section 6.2.1.
 Use this object to replace
 rcIpv6RouterAdvertRetransmitTimer

Context

MIB
RC-IPV6-MIB
OID
.1.3.6.1.4.1.2272.1.62.1.1.5.1.14
Type
column
Access
readwrite
Status
current
Parent
rcIpv6RouterAdvertEntry
Table
rcIpv6RouterAdvertTable
Siblings
13

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpv6RouterAdvertIfIndex
An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2272.1.62.1.1.5.1.1
rcIpv6RouterAdvertManagedFlag
if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.5.1.10
rcIpv6RouterAdvertOtherConfigFlag
if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.5.1.11
rcIpv6RouterAdvertDadNsNum
The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is used to send one adve…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.12
rcIpv6RouterAdvertLinkMTU
The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6.2.1
columnUnsigned32.1.3.6.1.4.1.2272.1.62.1.1.5.1.13
rcIpv6RouterAdvertSendAdverts
A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Section 6.2.1
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.5.1.2
rcIpv6RouterAdvertUseDefaultVal
Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value.
columnEnumeration.1.3.6.1.4.1.2272.1.62.1.1.5.1.3
rcIpv6RouterAdvertMaxInterval
Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 180…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.4
rcIpv6RouterAdvertMinInterval
Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and no greater than .75…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.5
rcIpv6RouterAdvertReachableTime
The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). …
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.6
rcIpv6RouterAdvertRetransmitTimer deprecated
The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero mea…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.7
rcIpv6RouterAdvertDefaultLifeTime
The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and 90…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.8
rcIpv6RouterAdvertCurHopLimit
The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. …
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.5.1.9