rcIpv6RouterAdvertMaxInterval
RC-IPV6-MIB ·
.1.3.6.1.4.1.2272.1.62.1.1.5.1.4
Object
column
r/w
Integer32
Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and no greater than 1800.
Context
- MIB
- RC-IPV6-MIB
- OID
.1.3.6.1.4.1.2272.1.62.1.1.5.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpv6RouterAdvertEntry
- Table
- rcIpv6RouterAdvertTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 4-1800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6RouterAdvertIfIndex An unique value to identify an ipv6 interface.
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of the vlan. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.62.1.1.5.1.1 |
| rcIpv6RouterAdvertManagedFlag if true then the M-bit(Managed address
configureation) in the router
adverisement will be set.
REFERENCE RFC2461 Section 6.2.1 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.5.1.10 |
| rcIpv6RouterAdvertOtherConfigFlag if true then the O-bit (Other stateful
Configuration) in the router
adverisement will be set. REFERENCE
RFC2461 Section 6.2.1 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.5.1.11 |
| rcIpv6RouterAdvertDadNsNum The number of neighbor solicitation
messages for DAD (Duplicate address
detection). A value 0 is used to disable
DAD process on this interface. A value 1
is used to send one adve… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.12 |
| rcIpv6RouterAdvertLinkMTU The value to be placed in MTU options sent by the
router on this interface. A value of zero
indicates that no MTU options are sent. REFERENCE
RFC2461 Section 6.2.1 | column | Unsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.13 |
| rcIpv6RouterAdvertRetransmitTime The value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero mea… | column | Unsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.14 |
| rcIpv6RouterAdvertSendAdverts A flag indicating whether or not the router sends periodic
router advertisements and responds to router solicitations
on this interface. REFERENCE RFC2461 Section 6.2.1 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.5.1.2 |
| rcIpv6RouterAdvertUseDefaultVal Select one of the value to set/use it's
value to default value, or set all the bits
to indicate all the options will be set to
their default value. | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.5.1.3 |
| rcIpv6RouterAdvertMinInterval Configure the min interval (in seconds)
at which the transmission of route
advertisments can occur on this interface.
This must be no less than 3 seconds and
no greater than .75… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.5 |
| rcIpv6RouterAdvertReachableTime The value (in milliseconds) to be placed in the router advertisement message
sent by the router. The value zero means
unspecified (by this router). … | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.6 |
| rcIpv6RouterAdvertRetransmitTimer deprecated The value (in milliseconds) to be placed in the retransmit timer field in router
advertisement message sent from this
interface. The value zero mea… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.7 |
| rcIpv6RouterAdvertDefaultLifeTime The value to be placed in the router lifetime field of
router advertisements sent from this interface. This value
MUST be either 0 or between rcIpv6RouterAdvertMaxInterval and
90… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.8 |
| rcIpv6RouterAdvertCurHopLimit The default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.
… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.5.1.9 |