atmVcCrossConnectExtenTable

RAD-MIB · .1.3.6.1.4.1.164.12.3.1.1.35

Object

table

An extension to the ATM VC Cross Connect table
(RFC2515 - atmVcCrossConnectTable).

Context

MIB: RAD-MIB
OID: .1.3.6.1.4.1.164.12.3.1.1.35
Type: table
Status: current
Parent: atmNteSysConfig
Siblings: 35
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
atmNteManagerTable The Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implicitly the correct ifI…	table	-	`.1.3.6.1.4.1.164.12.3.1.1.1`
atmNteConfCAC	node	-	`.1.3.6.1.4.1.164.12.3.1.1.10`
atmNteHostIfTable Host IP interface table.	table	-	`.1.3.6.1.4.1.164.12.3.1.1.11`
atmNteShaperMode Shaper Mode. vpInbandMng - Vcc within a Vp for management.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.12`
atmNteOutputRate Aggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.13`
atmNteTosMode TOS Mode.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.14`
atmNteTosMask This parameter determines the seqence of bits that will be used for TOS. For ACE101 this parameter is applicable only if atmNteTosMode = enable. Valid only for IP-TOS process.	scalar	OctetString	`.1.3.6.1.4.1.164.12.3.1.1.15`
atmNteTosHighPriority Priorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represented by the bit locat…	scalar	OctetString	`.1.3.6.1.4.1.164.12.3.1.1.16`
atmNtePlugAndPlayActivity Activity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn IP address into onli…	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.17`
atmNteSlotUsage Applicable to ace2002. Slot 2 might be configured as user slot or as network slot.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.18`
atmNteConnectionsMaxNumber The MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the system only after reset…	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.19`
atmNteUPLTCR The Unacceptable ES Limit threshold for Performance Management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.2`
atmNteDefaultVpi Default Vpi for management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.20`
atmNteDefaultVci Default Vci for management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.21`
atmNteReservedVpi Internal use VPI, where shaperMode=vpInbandMng.	scalar	Integer32	`.1.3.6.1.4.1.164.12.3.1.1.22`
atmNteRdnManagement The redundancy management status.	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.23`
atmNtePlugAndPlayIfIndex The ifIndex of the Plug and Play VCC.	scalar	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.164.12.3.1.1.24`
atmNteLoopbackTimeout The Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.25`
atmNteOamTable This table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table enables addition o…	table	-	`.1.3.6.1.4.1.164.12.3.1.1.26`
atmNteDefaultLoopbackThreshold The Default OAM Loopback Failure Threshold value that will be used for configuration.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.27`
atmNteMaxBurstSize The Maximum allowed burst size (cell units). This object is applicable for each Physical port.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.28`
atmNteGranularityFactor This parameter affects the granularity of the guaranteed Rate (SCR+MCR) in spaced connection (cell/sec units). It is also defines the minimum guaranteed rate in spaced connecti…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.29`
atmNteDPLTCR The Degraded ES Limit threshold for Performance Management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.3`
atmNteTotalInputRate This parameter indicates the total input rate of the device in cells/sec.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.30`
atmNteTotalOutputRate This parameter indicates the total output rate of the device in cells/sec.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.31`
atmAlarmForwardingTable The Alarm Forwarding Mechanism will be operated for this table entries.	table	-	`.1.3.6.1.4.1.164.12.3.1.1.32`
atmSysConfigCellTest	node	-	`.1.3.6.1.4.1.164.12.3.1.1.33`
atmVpCrossConnectExtenTable An extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable).	table	-	`.1.3.6.1.4.1.164.12.3.1.1.34`
atmNteQosMode This variable defines the QoS Mode. disable(1) - QoS is disabled. multipleVc(2) - QoS is enabled and multiple VCs can be bound per bridge port. singleVc(3) - QoS is enabled…	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.37`
atmTrafficDescrParamXTable An Augment to ATM Traffic Descriptor Parameter Table (atmTrafficDescrParamTable in ATM-MIB; RFC-2515).	table	-	`.1.3.6.1.4.1.164.12.3.1.1.38`
atmNteSysLogClearAll Setting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).	scalar	Enumeration	`.1.3.6.1.4.1.164.12.3.1.1.4`
atmNteUSESLTCR The Unacceptable SES Limit threshold for Performance Management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.5`
atmNteDSESLTCR The Degraded ES Limit threshold for Performance Management.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.12.3.1.1.6`
atmNteProtection	node	-	`.1.3.6.1.4.1.164.12.3.1.1.8`
atmNteConfOam	node	-	`.1.3.6.1.4.1.164.12.3.1.1.9`

Child Objects