atmNteGranularityFactor

RAD-MIB · .1.3.6.1.4.1.164.12.3.1.1.29
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This parameter affects the granularity of the guaranteed 
Rate (SCR+MCR) in spaced connection (cell/sec units). 
It is also defines the minimum guaranteed rate in spaced 
connection.

Context

MIB
RAD-MIB
OID
.1.3.6.1.4.1.164.12.3.1.1.29
Type
scalar
Access
readwrite
Status
current
Parent
atmNteSysConfig
Siblings
35

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Enumerated Values
1notApplicable
2link1
3link2
4link3
5link4
6automatic
Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
atmNteManagerTable
The Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implicitly the correct ifI…
table-.1.3.6.1.4.1.164.12.3.1.1.1
atmNteConfCACnode-.1.3.6.1.4.1.164.12.3.1.1.10
atmNteHostIfTable
Host IP interface table.
table-.1.3.6.1.4.1.164.12.3.1.1.11
atmNteShaperMode
Shaper Mode. vpInbandMng - Vcc within a Vp for management.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.12
atmNteOutputRate
Aggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.13
atmNteTosMode
TOS Mode.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.14
atmNteTosMask
This parameter determines the seqence of bits that will be used for TOS. For ACE101 this parameter is applicable only if atmNteTosMode = enable. Valid only for IP-TOS process.
scalarOctetString.1.3.6.1.4.1.164.12.3.1.1.15
atmNteTosHighPriority
Priorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represented by the bit locat…
scalarOctetString.1.3.6.1.4.1.164.12.3.1.1.16
atmNtePlugAndPlayActivity
Activity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn IP address into onli…
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.17
atmNteSlotUsage
Applicable to ace2002. Slot 2 might be configured as user slot or as network slot.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.18
atmNteConnectionsMaxNumber
The MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the system only after reset…
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.19
atmNteUPLTCR
The Unacceptable ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.2
atmNteDefaultVpi
Default Vpi for management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.20
atmNteDefaultVci
Default Vci for management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.21
atmNteReservedVpi
Internal use VPI, where shaperMode=vpInbandMng.
scalarInteger32.1.3.6.1.4.1.164.12.3.1.1.22
atmNteRdnManagement
The redundancy management status.
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.23
atmNtePlugAndPlayIfIndex
The ifIndex of the Plug and Play VCC.
scalarIF-MIBInterfaceIndex.1.3.6.1.4.1.164.12.3.1.1.24
atmNteLoopbackTimeout
The Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.25
atmNteOamTable
This table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table enables addition o…
table-.1.3.6.1.4.1.164.12.3.1.1.26
atmNteDefaultLoopbackThreshold
The Default OAM Loopback Failure Threshold value that will be used for configuration.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.27
atmNteMaxBurstSize
The Maximum allowed burst size (cell units). This object is applicable for each Physical port.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.28
atmNteDPLTCR
The Degraded ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.3
atmNteTotalInputRate
This parameter indicates the total input rate of the device in cells/sec.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.30
atmNteTotalOutputRate
This parameter indicates the total output rate of the device in cells/sec.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.31
atmAlarmForwardingTable
The Alarm Forwarding Mechanism will be operated for this table entries.
table-.1.3.6.1.4.1.164.12.3.1.1.32
atmSysConfigCellTestnode-.1.3.6.1.4.1.164.12.3.1.1.33
atmVpCrossConnectExtenTable
An extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable).
table-.1.3.6.1.4.1.164.12.3.1.1.34
atmVcCrossConnectExtenTable
An extension to the ATM VC Cross Connect table (RFC2515 - atmVcCrossConnectTable).
table-.1.3.6.1.4.1.164.12.3.1.1.35
atmNteQosMode
This variable defines the QoS Mode. disable(1) - QoS is disabled. multipleVc(2) - QoS is enabled and multiple VCs can be bound per bridge port. singleVc(3) - QoS is enabled…
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.37
atmTrafficDescrParamXTable
An Augment to ATM Traffic Descriptor Parameter Table (atmTrafficDescrParamTable in ATM-MIB; RFC-2515).
table-.1.3.6.1.4.1.164.12.3.1.1.38
atmNteSysLogClearAll
Setting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
scalarEnumeration.1.3.6.1.4.1.164.12.3.1.1.4
atmNteUSESLTCR
The Unacceptable SES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.5
atmNteDSESLTCR
The Degraded ES Limit threshold for Performance Management.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.164.12.3.1.1.6
atmNteProtectionnode-.1.3.6.1.4.1.164.12.3.1.1.8
atmNteConfOamnode-.1.3.6.1.4.1.164.12.3.1.1.9