atmNteSlotUsage
RAD-MIB ·
.1.3.6.1.4.1.164.12.3.1.1.18
Object
scalar
r/w
Enumeration
Applicable to ace2002. Slot 2 might be configured as user slot or as network slot.
Context
- MIB
- RAD-MIB
- OID
.1.3.6.1.4.1.164.12.3.1.1.18- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- atmNteSysConfig
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| atmNteManagerTable The Manager Table includes all the NMSs that
receive traps from this agent. A single manager
can receive traps on more than one PVC. The agent
will set implicitly the correct ifI… | table | - | .1.3.6.1.4.1.164.12.3.1.1.1 |
| atmNteConfCAC | node | - | .1.3.6.1.4.1.164.12.3.1.1.10 |
| atmNteHostIfTable Host IP interface table. | table | - | .1.3.6.1.4.1.164.12.3.1.1.11 |
| atmNteShaperMode Shaper Mode.
vpInbandMng - Vcc within a Vp for management. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.12 |
| atmNteOutputRate Aggregate shaping output rate in Cells per Seconds units.
Default value is the Network port rate. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.13 |
| atmNteTosMode TOS Mode. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.14 |
| atmNteTosMask This parameter determines the seqence of bits that will be used for TOS.
For ACE101 this parameter is applicable only if atmNteTosMode = enable.
Valid only for IP-TOS process. | scalar | OctetString | .1.3.6.1.4.1.164.12.3.1.1.15 |
| atmNteTosHighPriority Priorities options are High or Low.
High priority will be represented by bit = 1.
Low priority will be represented by bit = 0.
Each TOS value will be represented by the bit locat… | scalar | OctetString | .1.3.6.1.4.1.164.12.3.1.1.16 |
| atmNtePlugAndPlayActivity Activity control for Manager Plug And Play.
disable - disable the feature.
offline - Automatic learn IP address into offline memory.
online - Automatic learn IP address into onli… | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.17 |
| atmNteConnectionsMaxNumber The MAX number of connections supported by system.
Setting this parameter will affect the number of MAX intervals supported.
This parameter will affect the system only after reset… | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.19 |
| atmNteUPLTCR The Unacceptable ES Limit threshold for Performance Management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.2 |
| atmNteDefaultVpi Default Vpi for management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.20 |
| atmNteDefaultVci Default Vci for management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.21 |
| atmNteReservedVpi Internal use VPI, where shaperMode=vpInbandMng. | scalar | Integer32 | .1.3.6.1.4.1.164.12.3.1.1.22 |
| atmNteRdnManagement The redundancy management status. | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.23 |
| atmNtePlugAndPlayIfIndex The ifIndex of the Plug and Play VCC. | scalar | IF-MIBInterfaceIndex | .1.3.6.1.4.1.164.12.3.1.1.24 |
| atmNteLoopbackTimeout The Loopback state timeout in minutes. A value of
zero means no timeout (for ever). Default is 5 min. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.25 |
| atmNteOamTable This table is a static table, which is created by agent once
upon initialization. The created entries are actually, only the
supported OAM features.
This table enables addition o… | table | - | .1.3.6.1.4.1.164.12.3.1.1.26 |
| atmNteDefaultLoopbackThreshold The Default OAM Loopback Failure Threshold value
that will be used for configuration. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.27 |
| atmNteMaxBurstSize The Maximum allowed burst size (cell units).
This object is applicable for each Physical port. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.28 |
| atmNteGranularityFactor This parameter affects the granularity of the guaranteed
Rate (SCR+MCR) in spaced connection (cell/sec units).
It is also defines the minimum guaranteed rate in spaced
connecti… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.29 |
| atmNteDPLTCR The Degraded ES Limit threshold for Performance Management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.3 |
| atmNteTotalInputRate This parameter indicates the total input rate of the
device in cells/sec. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.30 |
| atmNteTotalOutputRate This parameter indicates the total output rate of the
device in cells/sec. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.31 |
| atmAlarmForwardingTable The Alarm Forwarding Mechanism will be operated
for this table entries. | table | - | .1.3.6.1.4.1.164.12.3.1.1.32 |
| atmSysConfigCellTest | node | - | .1.3.6.1.4.1.164.12.3.1.1.33 |
| atmVpCrossConnectExtenTable An extension to the ATM VP Cross Connect table
(RFC2515 - atmVpCrossConnectTable). | table | - | .1.3.6.1.4.1.164.12.3.1.1.34 |
| atmVcCrossConnectExtenTable An extension to the ATM VC Cross Connect table
(RFC2515 - atmVcCrossConnectTable). | table | - | .1.3.6.1.4.1.164.12.3.1.1.35 |
| atmNteQosMode This variable defines the QoS Mode.
disable(1) - QoS is disabled.
multipleVc(2) - QoS is enabled and
multiple VCs can be bound per bridge port.
singleVc(3) - QoS is enabled… | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.37 |
| atmTrafficDescrParamXTable An Augment to ATM Traffic Descriptor Parameter Table
(atmTrafficDescrParamTable in ATM-MIB; RFC-2515). | table | - | .1.3.6.1.4.1.164.12.3.1.1.38 |
| atmNteSysLogClearAll Setting the variable to clear(3) removes all entries in the
Log Buffer of the agent. The agent will immediately reset
the variable to off(2). | scalar | Enumeration | .1.3.6.1.4.1.164.12.3.1.1.4 |
| atmNteUSESLTCR The Unacceptable SES Limit threshold for Performance Management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.5 |
| atmNteDSESLTCR The Degraded ES Limit threshold for Performance Management. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.12.3.1.1.6 |
| atmNteProtection | node | - | .1.3.6.1.4.1.164.12.3.1.1.8 |
| atmNteConfOam | node | - | .1.3.6.1.4.1.164.12.3.1.1.9 |