circuitPoleSensorUpperCriticalThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.11.6.1.23
Object
The upper critical threshold as an unsigned integer. The value of this OID variable should be scaled by circuitPoleSensorDecimalDigits. For example, if the value is 1 and circuitPoleSensorDecimalDigits is 2, then actual value is 0.01. The value is clamped if the scaled threshold exceeds 4294967295. It is undefined for sensors which can have negative readings. This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.11.6.1.23- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- circuitPoleSensorConfigurationEntry
- Table
- circuitPoleSensorConfigurationTable
- Siblings
- 18
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| circuitPoleSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.11 |
| circuitPoleSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuit… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.12 |
| circuitPoleSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the valu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.13 |
| circuitPoleSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.14 |
| circuitPoleSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.21 |
| circuitPoleSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.22 |
| circuitPoleSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.24 |
| circuitPoleSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.11.6.1.25 |
| circuitPoleSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.26 |
| circuitPoleSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPol… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.27 |
| circuitPoleSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.28 |
| circuitPoleSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPoleS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.29 |
| circuitPoleSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.30 |
| circuitPoleSensorSignedUpperWarningThreshold The upper warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPoleS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.31 |
| circuitPoleSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.11.6.1.4 |
| circuitPoleSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.11.6.1.6 |
| circuitPoleSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.7 |
| circuitPoleSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.9 |