circuitPoleSensorSignedUpperWarningThreshold
PDU2-MIB ·
.1.3.6.1.4.1.13742.6.3.11.6.1.31
Object
The upper warning threshold as a signed integer. The value of this OID variable should be scaled by circuitPoleSensorDecimalDigits. For example, if the value is 1 and circuitPoleSensorDecimalDigits is 2, then actual value is 0.01. The value is undefined for sensors whose range exceeds the Integer32 range (-2147483648 .. 2147483647). This parameter does not apply to sensors without numerical reading.
Context
- MIB
- PDU2-MIB
- OID
.1.3.6.1.4.1.13742.6.3.11.6.1.31- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- circuitPoleSensorConfigurationEntry
- Table
- circuitPoleSensorConfigurationTable
- Siblings
- 18
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| circuitPoleSensorMaximum The largest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.11 |
| circuitPoleSensorMinimum The smallest possible reading as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuit… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.12 |
| circuitPoleSensorHysteresis The hysteresis used when crossing a threshold towards the normal state.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the valu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.13 |
| circuitPoleSensorStateChangeDelay The delay measured in samples before a state is asserted.
If the value is zero, then the state is asserted as soon as
it is detected; if it is non-zero, say n, then the assertion
… | column | Unsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.14 |
| circuitPoleSensorLowerCriticalThreshold The lower critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.21 |
| circuitPoleSensorLowerWarningThreshold The lower warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.22 |
| circuitPoleSensorUpperCriticalThreshold The upper critical threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitP… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.23 |
| circuitPoleSensorUpperWarningThreshold The upper warning threshold as an unsigned integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.24 |
| circuitPoleSensorEnabledThresholds A bit string indicating which thresholds are enabled.
This parameter does not apply to sensors without numerical reading. | column | Bits | .1.3.6.1.4.1.13742.6.3.11.6.1.25 |
| circuitPoleSensorSignedMaximum The largest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.26 |
| circuitPoleSensorSignedMinimum The smallest possible reading as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPol… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.27 |
| circuitPoleSensorSignedLowerCriticalThreshold The lower critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.28 |
| circuitPoleSensorSignedLowerWarningThreshold The lower warning threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPoleS… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.29 |
| circuitPoleSensorSignedUpperCriticalThreshold The upper critical threshold as a signed integer.
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value is 1 and
circuitPole… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.13742.6.3.11.6.1.30 |
| circuitPoleSensorLogAvailable Is data logging enabled for this sensor? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.13742.6.3.11.6.1.4 |
| circuitPoleSensorUnits The unit in which the sensor reading is reported.
This parameter does not apply to sensors without numerical reading. | column | SensorUnitsEnumeration | .1.3.6.1.4.1.13742.6.3.11.6.1.6 |
| circuitPoleSensorDecimalDigits The number of digits displayed to the right of the decimal point.
This parameter does not apply to sensors without numerical reading. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.7 |
| circuitPoleSensorResolution The resolution: the minimum difference between any two measured values
The value of this OID variable should be scaled by
circuitPoleSensorDecimalDigits. For example, if the value… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.13742.6.3.11.6.1.9 |