mplsOamIdMeSourceMepIndex
MPLS-OAM-ID-STD-MIB ·
.1.3.6.1.2.1.10.166.21.1.5.1.5
Object
Indicates the source MEP index of the ME. This object should be configured if the mplsOamIdMegOperatorType object in the mplsOamIdMegEntry is configured as iccBased (2). If the MEG is configured for an IP-based operator, the value of this object should be set to zero, and the MEP ID will be automatically derived from the service identifiers (MPLS-TP LSP/PW Identifier).
Context
- MIB
- MPLS-OAM-ID-STD-MIB
- OID
.1.3.6.1.2.1.10.166.21.1.5.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsOamIdMeEntry
- Table
- mplsOamIdMeTable
- Siblings
- 10
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOamIdMeIndex Uniquely identifies an ME index within a MEG. Managers
should obtain new values for row creation in this table by
reading mplsOamIdMeIndexNext. | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.1 |
| mplsOamIdMeRowStatus This variable is used to create, modify, and/or delete
a row in this table. When a row in this table is in the
active(1) state, no objects in that row can be modified
by the agen… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.21.1.5.1.10 |
| mplsOamIdMeStorageType This variable indicates the storage type for this object.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.21.1.5.1.11 |
| mplsOamIdMeMpIndex Indicates the Maintenance Point (MP) index that is used to
create multiple MEPs in a node of a single ME. The value
of this object can be the MEP index or the MIP index.
Managers… | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.2 |
| mplsOamIdMeName This object denotes the ME name. Each ME has a unique
name within a MEG. | column | OctetString | .1.3.6.1.2.1.10.166.21.1.5.1.3 |
| mplsOamIdMeMpIfIndex Indicates the MP interface.
If the mplsOamIdMegMpLocation object value
is perNode (1), the MP interface index should point
to the incoming interface or outgoing interface, or
be z… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.166.21.1.5.1.4 |
| mplsOamIdMeSinkMepIndex Indicates the sink MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the MEG… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.6 |
| mplsOamIdMeMpType Indicates the MP type within the MEG.
The object should have the value mep (1) only in the
ingress or egress nodes of the transport path.
The object … | column | Enumeration | .1.3.6.1.2.1.10.166.21.1.5.1.7 |
| mplsOamIdMeMepDirection Indicates the direction of the MEP. This object
should be configured if mplsOamIdMeMpType is configured
as mep (1); otherwise, notApplicable (3) is set. | column | Enumeration | .1.3.6.1.2.1.10.166.21.1.5.1.8 |
| mplsOamIdMeServicePointer This variable represents a pointer to the MPLS-TP
transport path. This value MUST point at an entry in the
mplsTunnelEntry if mplsOamIdMegServicePointerType
is configured as tunn… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.10.166.21.1.5.1.9 |