mplsOamIdMeMepDirection
MPLS-OAM-ID-STD-MIB ·
.1.3.6.1.2.1.10.166.21.1.5.1.8
Object
column
r/w
Enumeration
Indicates the direction of the MEP. This object should be configured if mplsOamIdMeMpType is configured as mep (1); otherwise, notApplicable (3) is set.
Context
- MIB
- MPLS-OAM-ID-STD-MIB
- OID
.1.3.6.1.2.1.10.166.21.1.5.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsOamIdMeEntry
- Table
- mplsOamIdMeTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOamIdMeIndex Uniquely identifies an ME index within a MEG. Managers
should obtain new values for row creation in this table by
reading mplsOamIdMeIndexNext. | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.1 |
| mplsOamIdMeRowStatus This variable is used to create, modify, and/or delete
a row in this table. When a row in this table is in the
active(1) state, no objects in that row can be modified
by the agen… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.21.1.5.1.10 |
| mplsOamIdMeStorageType This variable indicates the storage type for this object.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.21.1.5.1.11 |
| mplsOamIdMeMpIndex Indicates the Maintenance Point (MP) index that is used to
create multiple MEPs in a node of a single ME. The value
of this object can be the MEP index or the MIP index.
Managers… | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.2 |
| mplsOamIdMeName This object denotes the ME name. Each ME has a unique
name within a MEG. | column | OctetString | .1.3.6.1.2.1.10.166.21.1.5.1.3 |
| mplsOamIdMeMpIfIndex Indicates the MP interface.
If the mplsOamIdMegMpLocation object value
is perNode (1), the MP interface index should point
to the incoming interface or outgoing interface, or
be z… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.166.21.1.5.1.4 |
| mplsOamIdMeSourceMepIndex Indicates the source MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the M… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.5 |
| mplsOamIdMeSinkMepIndex Indicates the sink MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the MEG… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.6 |
| mplsOamIdMeMpType Indicates the MP type within the MEG.
The object should have the value mep (1) only in the
ingress or egress nodes of the transport path.
The object … | column | Enumeration | .1.3.6.1.2.1.10.166.21.1.5.1.7 |
| mplsOamIdMeServicePointer This variable represents a pointer to the MPLS-TP
transport path. This value MUST point at an entry in the
mplsTunnelEntry if mplsOamIdMegServicePointerType
is configured as tunn… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.10.166.21.1.5.1.9 |