mplsOamIdMeServicePointer
MPLS-OAM-ID-STD-MIB ·
.1.3.6.1.2.1.10.166.21.1.5.1.9
Object
This variable represents a pointer to the MPLS-TP
transport path. This value MUST point at an entry in the
mplsTunnelEntry if mplsOamIdMegServicePointerType
is configured as tunnel (1), lsp (2), or section (4),
or at an entry in the pwEntry if
mplsOamIdMegServicePointerType is configured
as pseudowire (3).
Note: This service pointer object is placed in the ME table
instead of the MEG table, since it will be useful in the
point-to-multipoint case, where each ME will point to
different branches of a point-to-multipoint tree.
Context
- MIB
- MPLS-OAM-ID-STD-MIB
- OID
.1.3.6.1.2.1.10.166.21.1.5.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mplsOamIdMeEntry
- Table
- mplsOamIdMeTable
- Siblings
- 10
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsOamIdMeIndex Uniquely identifies an ME index within a MEG. Managers
should obtain new values for row creation in this table by
reading mplsOamIdMeIndexNext. | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.1 |
| mplsOamIdMeRowStatus This variable is used to create, modify, and/or delete
a row in this table. When a row in this table is in the
active(1) state, no objects in that row can be modified
by the agen… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.10.166.21.1.5.1.10 |
| mplsOamIdMeStorageType This variable indicates the storage type for this object.
Conceptual rows having the value 'permanent'
need not allow write access to any columnar
objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.10.166.21.1.5.1.11 |
| mplsOamIdMeMpIndex Indicates the Maintenance Point (MP) index that is used to
create multiple MEPs in a node of a single ME. The value
of this object can be the MEP index or the MIP index.
Managers… | column | Unsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.2 |
| mplsOamIdMeName This object denotes the ME name. Each ME has a unique
name within a MEG. | column | OctetString | .1.3.6.1.2.1.10.166.21.1.5.1.3 |
| mplsOamIdMeMpIfIndex Indicates the MP interface.
If the mplsOamIdMegMpLocation object value
is perNode (1), the MP interface index should point
to the incoming interface or outgoing interface, or
be z… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.10.166.21.1.5.1.4 |
| mplsOamIdMeSourceMepIndex Indicates the source MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the M… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.5 |
| mplsOamIdMeSinkMepIndex Indicates the sink MEP index of the ME. This object
should be configured if the mplsOamIdMegOperatorType object
in the mplsOamIdMegEntry is configured as iccBased (2).
If the MEG… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.10.166.21.1.5.1.6 |
| mplsOamIdMeMpType Indicates the MP type within the MEG.
The object should have the value mep (1) only in the
ingress or egress nodes of the transport path.
The object … | column | Enumeration | .1.3.6.1.2.1.10.166.21.1.5.1.7 |
| mplsOamIdMeMepDirection Indicates the direction of the MEP. This object
should be configured if mplsOamIdMeMpType is configured
as mep (1); otherwise, notApplicable (3) is set. | column | Enumeration | .1.3.6.1.2.1.10.166.21.1.5.1.8 |