lgpPwrStateDCBusQualification

LIEBERT-GP-POWER-MIB · .1.3.6.1.4.1.476.1.42.3.5.3.36
MIB view Table view

Object

scalar Enumeration 
The current operational state of the DC bus. The unit may or may not 
operate normally under 'marginalLow' and 'marginalHigh' states.

Context

MIB
LIEBERT-GP-POWER-MIB
OID
.1.3.6.1.4.1.476.1.42.3.5.3.36
Type
scalar
Access
readonly
Status
current
Parent
lgpPwrStatus
Siblings
57

Syntax

Enumeration

Values & Constraints

Enumerated Values
1fail
2marginalLow
3normal
4marginalHigh

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lgpPwrTransferCount
Number of times that the output load has been transferred between the available input sources.
scalarCount SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.1
lgpPwrOutputToLoadOnBypass
The present source of output power is the Bypass.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.10
lgpPwrBoost
The present state of the boost circuitry
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.11
lgpPwrBuck
The present state of the buck circuitry
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.12
lgpPwrShutdownOverTemperature
The system has previously shutdown due to an over temperature condition.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.13
lgpPwrShutdownOverload
The system has previously shutdown due to an over load condition.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.14
lgpPwrShutdownDcBusOverload
The system has previously shutdown due to a DC bus over load condition.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.15
lgpPwrShutdownOutputShort
The system has previously shutdown due to an output short condition.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.16
lgpPwrShutdownLineSwap
The system has previously shutdown due to a condition where the line and neutral were reversed.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.17
lgpPwrShutdownLowBattery
The system has previously shutdown due to a low battery condition.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.18
lgpPwrShutdownRemote
The system has previously shutdown due to a remote shutdown command.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.19
lgpPwrAutoTransferTimer
The required wait time between output load auto transfer attempts between available input sources.
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.2
lgpPwrShutdownInputUnderVoltage
The system has previously shutdown due to an under voltage condition during startup.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.20
lgpPwrShutdownPowerFactorCorrectionFailure
The system has previously shutdown due to a power factor correction startup failure.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.21
lgpPwrShutdownHardware
The system has previously shutdown due external shutdown signal.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.22
lgpPwrRedundantSubModule
The system has a redundant battery module installed.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.23
lgpPwrBypassReady
The ability of the bypass to support the output load of the system. If Yes, the bypass is available to transfer to.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.24
lgpPwrGeneratorStatus
The state of the system generator.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.25
lgpPwrRotaryBreakerStatus
The state of the system rotary breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.26
lgpPwrPowerFactorCorrection
The state of the power factor correction circuitry of the system.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.27
lgpPwrBypassSyncDiff
The phase angle difference between the inverter output and bypass source. A positive value means the inverter leads the bypass source. A negative value means the inverter lags the…
scalar0.1 Degrees SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.28
lgpPwrBypassOverloadShutdownTime
The calculated time remaining before bypass static switch shutdown due to the present overload condition. If the bypass is not in an overload condition, this object returns -1.
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.29
lgpPwrAutoReTransferEnabled
The ability to retransfer the output load automatically to the well known measurement source from the 'lgpPwrWellKnownMeasurements' sub-tree that is the preferred input source of …
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.3
lgpPwrInverterOverloadShutdownTime
The calculated time remaining before inverter shutdown. The calculated time of inverter operation remaining for the present overload event. Note: If the inverter is not…
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.30
lgpPwrStateOutputSource
The UPS's output power source (inverter, bypass, or none). NOTE: It is possible that the load still has power from the Maintenance Bypass.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.31
lgpPwrStateInputSource
The system input power source (none, utility, generator).
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.32
lgpPwrStateInputQualification
The current state of the system input. The unit may or may not operate normally under 'marginalLow' and 'marginalHigh' states.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.33
lgpPwrStateBypassStaticSwitchState
The current state of the bypass static switch.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.34
lgpPwrStateBypassQualification
The current operational state of the bypass static switch. The unit may or may not operate normally under 'marginalLow' and 'marginalHigh' states.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.35
lgpPwrStateOutQualification
The current operational state of the output. The unit may or may not operate normally under 'marginalLow' and 'marginalHigh' states.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.37
lgpPwrStateInverterQualification
The current operational state of the inverter. The unit may or may not operate normally under 'marginalLow' and 'marginalHigh' states.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.38
lgpPwrStateInverterState
The current state of the inverter.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.39
lgpPwrSyncPhaseAngle
The phase angle difference of source 1 in relation to source 2.
scalar0.1 Degrees Integer32.1.3.6.1.4.1.476.1.42.3.5.3.4
lgpPwrStateRectifierState
The current state of the rectifier.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.40
lgpPwrStateModuleGroup
This group contains UPS module information.
node-.1.3.6.1.4.1.476.1.42.3.5.3.41
lgpPwrStateBackfeedBrkrState
The state of the Static Bypass Switch Line Disconnect Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.42
lgpPwrStateLoadDisconnectState
The state of the Static Bypass Switch Load Disconnect Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.43
lgpPwrStateInputBrkrState
The state of the Input Disconnect Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.44
lgpPwrStateTrapFilterBrkrState
The state of the Trap Filter Disconnect Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.45
lgpPwrStateInvOutputBrkrState
The state of the Inverter Output Disconnect Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.46
lgpPwrStateIntBypassBrkrState
The state of the Internal Bypass Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.47
lgpPwrStateBypassIsolBrkrState
The state of the Bypass Isolation Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.48
lgpPwrStateRectifierIsolBrkrState
The state of the Rectifier Isolation Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.49
lgpPwrParallelSystemOutputToLoadSource
The source supporting the parallel system's load.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.5
lgpPwrStateMaintBypassBrkrState
The state of the Maintenance Bypass Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.50
lgpPwrStateMaintIsolBrkrState
The state of the Maintenance Isolation Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.51
lgpPwrStateOutStaticSwState
The state of the Output Series Static Switch.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.52
lgpPwrStateModuleOutBrkrState
The state of the Module Output Breaker.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.53
lgpPwrBypassReXfrRemainTime
The time remaining before an inverter overload or inverter fault can be cleared and auto retransfer from the bypass to the inverter can take place. Note: If an inver…
scalarseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.476.1.42.3.5.3.54
lgpPwrStateUpsOutputSource
The present source of output power. The enumeration none(2) indicates that there is no source of output power (and therefore no output power), for example, the system has opened …
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.55
lgpPwrStateLoadBusSynchronization
The state of the Load Bus Synchronizer (LBS).
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.56
lgpPwrStateCircuitBrkrStateGroup
This group contains Static Switch circuit breaker state information.
node-.1.3.6.1.4.1.476.1.42.3.5.3.57
lgpPwrEconomicOperation
The present state of ECO mode operation, on(1) if system is on bypass due to ECO mode operation, off(0) any other time.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.58
lgpPwrDcToDcConverter
The state of the DC to DC converter.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.6
lgpPwrOutputToLoadOnInverter
The present source of output power is the Inverter.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.7
lgpPwrBatteryChargeCompensating
The system is adjusting the battery charging algorithm to accommodate for the battery temperature.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.8
lgpPwrInverterReady
The ability of the inverter to support the output load of the system.
scalarEnumeration.1.3.6.1.4.1.476.1.42.3.5.3.9