LIEBERT-GP-POWER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
59
.1.3.6.1.4.1.476.1.42.3.5.2.2
·
1 row entry
·
18 columns
This table contains a list of AC power measurement point entries. The table contains zero, one, or many rows, depending upon the number of power related measurement points available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. Each row in the table represents a series of measurements on a given point or location within the system. Measurement points/locations are identified by the object identifier 'lgpPwrMeasurementPointId' in the 'LgpPwrMeasurementPointEntry' object. The actual measurement being taken at that identified point is identified by the other corresponding columns in the LgpPwrMeasurementPointEntry for the particular row of the table.
This entry defines the measurements to be populated in the
various columns of the 'lgpPwrMeasurementPointTable'.
various columns of the 'lgpPwrMeasurementPointTable'.
Indexes
lgpPwrMeasurementPointIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
lgpPwrMeasurementPointIndex
This is the index that indicates the row of the
'lgpPwrMeasurementPointTable' for a power measurement point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.1 |
||||
|
lgpPwrMeasurementPointId
An OID representing a well known measurement point.
These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such … |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.2.2.1.2 |
||||
|
lgpPwrMeasurementPointNumLines
The number of lines on the indicated power measurement point.
(i.e. the number of phases on the power source being measured.) |
CountSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.3 |
||||
|
lgpPwrMeasurementPointNomVolts
The magnitude of the nominal voltage on the power source being
measured. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.4 |
||||
|
lgpPwrMeasurementPointNomFrequency
The nominal or configured/expected frequency for the power
source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
HertzSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.5 |
||||
|
lgpPwrMeasurementPointFrequency
The present (actual) frequency for the power source indicated
by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
HertzSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.6 |
||||
|
lgpPwrMeasurementPointApparentPower
The present apparent AC power for the power source
indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
Volt-AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.7 |
||||
|
lgpPwrMeasurementPointTruePower
The present AC power for the power source indicated by
'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
WattSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.8 |
||||
|
lgpPwrMeasurementPointPowerFactor
The present Power Factor for the power source indicated by
'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
.01 Power FactorSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.9 |
||||
|
lgpPwrMeasurementPointWattHours
The present number of Watt Hours for the power source indicated by
'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
Watt-HourSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.10 |
||||
|
lgpPwrMeasurementPointVAPercent
The percentage of the rated apparent AC power of the power
source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
0.1 PercentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.11 |
||||
|
lgpPwrMeasurementPointNeutralCurrent
The present neutral current of the power point indicated by
'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.12 |
||||
|
lgpPwrMeasurementPointGroundCurrent
The present ground current of the power point indicated by
'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
0.1 AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.13 |
||||
|
lgpPwrMeasurementPointNomCurrent
The nominal or configured/expected current of the power point
indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
0.1 AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.14 |
||||
|
lgpPwrMeasurementPointNomPowerFactor
The nominal or configured/expected power factor of the power point
indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
.01 Power FactorSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.15 |
||||
|
lgpPwrMeasurementPointNomVA
The nominal or configured/expected apparent AC power for the power
source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
Volt-AmpSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.16 |
||||
|
lgpPwrMeasurementPointNomW
The nominal or configured/expected true AC power for the power
source indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. |
WattSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.17 |
||||
|
lgpPwrMeasurementPointPowerFactorTag
The present description of the Power Factor for the power source
indicated by 'lgpPwrMeasurementPointId' in the corresponding row in the lgpPwrMeasurementPointTable. If Leading, the load is said to be capacitive and th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.476.1.42.3.5.2.2.1.19 |
.1.3.6.1.4.1.476.1.42.3.5.2.3
·
1 row entry
·
21 columns
A list of power measurements for each phase/line for a given
power measurement point/location in the 'lgpPwrMeasurementPointTable'.
The lgpPwrMeasurementPointIndex in this table corresponds to the
index in the lgpPwrMeasurementPointTable.
This table contains zero, one, or
many rows, depending upon the number of power line source objects
available. The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.
This entry defines the contents of the columns for the table
'lgpPwrLineMeasurementTable'.
'lgpPwrLineMeasurementTable'.
Indexes
lgpPwrMeasurementPtIndex lgpPwrLineMeasurementIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
lgpPwrMeasurementPtIndex
This is the index indicating the row of the table
'lgpPwrMeasurementPointTable' for a power measurement point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.1 |
||||
|
lgpPwrLineMeasurementIndex
This is the index indicating the row of the table
'lgpPwrLineMeasurementTable' for a power measurement point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.2 |
||||
|
lgpPwrMeasurementPoint
An OID representing a well known measurement point.
These object identifiers indicate a point or location of power measurement in a power system. The OID name usually implies a location of the measurement point such as… |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.2.3.1.3 |
||||
|
lgpPwrLineMeasurementVoltsLL
The present Line-to-Line voltage measurement for the indicated
source. The line being measured is given by the lgpPwrLineMeasurementIndex [1 = AB, 2 = BC, 3 = CA]. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.4 |
||||
|
lgpPwrLineMeasurementVoltsLN
The present Line-to-neutral voltage measurement for the indicated
source. The line being measured is given by the lgpPwrLineMeasurementIndex where [1 = A, 2 = B, 3 = C]. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.5 |
||||
|
lgpPwrLineMeasurementCurrent
The present current measurement for the indicated source. The line
being measured is given by the 'lgpPwrLineMeasurementIndex' where [1 = A, 2 = B, 3 = C]. |
AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.6 |
||||
|
lgpPwrLineMeasurementCapacity
The percentage of the power capacity presently being used on this
line. |
percentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.7 |
||||
|
lgpPwrLineMeasurementVA
The present apparent AC line power.
|
Volt-AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.8 |
||||
|
lgpPwrLineMeasurementTruePower
The present AC line power measured in watts.
|
WattSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.9 |
||||
|
lgpPwrLineMeasurementVoltageTHD
The present total harmonic distortion on the AC line voltage.
|
0.1 PercentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.10 |
||||
|
lgpPwrLineMeasurementCurrentTHD
The present total harmonic distortion on the AC line current.
|
0.1 PercentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.11 |
||||
|
lgpPwrLineMeasurementKFactorCurrent
The present line K Factor.
|
0.1 K FactorSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.12 |
||||
|
lgpPwrLineMeasurementCrestFactorCurrent
The present crest factor of the line current.
|
0.1 Crest FactorSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.13 |
||||
|
lgpPwrLineMeasurementPowerFactor
The present Power Factor for the line.
|
0.01 Power FactorSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.14 |
||||
|
lgpPwrLineMeasurementPowerFactorTag
The present description of the Power Factor for the line. If
Leading, the load is said to be capacitive and the phase of the current leads the voltage. If Lagging, the load is said to be inductive and the phase of the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.15 |
||||
|
lgpPwrLineMeasurementMaxVolts
The maximum voltage measurement recorded for the indicated source
since the command 'lgpPwrStatisticsReset' was executed. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.16 |
||||
|
lgpPwrLineMeasurementMinVolts
The minimum voltage measurement recorded for the
indicated source since the command 'lgpPwrStatisticsReset' was executed. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.17 |
||||
|
lgpPwrLineMeasurementVAR
The present reactive AC line power of the power source indicated by
'lgpPwrMeasurementPoint'. |
Volt-Amp-ReactiveSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.18 |
||||
|
lgpPwrLineMeasurementPercentLoad
The present percent load of the AC line power.
|
percentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.19 |
||||
|
lgpPwrLineMeasurementVolts
The present voltage measurement for the indicated source.
|
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.20 |
||||
|
lgpPwrLineMeasurementVACapacity
The percentage of the apparent power capacity presently being
used on this line. |
percentSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.3.1.21 |
.1.3.6.1.4.1.476.1.42.3.5.2.4
·
1 row entry
·
7 columns
This table contains a list of DC power measurement point entries. The table contains zero, one, or many rows, depending upon the number of power related measurement points available. The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device. Each row in the table represents a series of measurements on a given point or location within the system. Measurement points/locations are identified by the object identifier 'lgpPwrDcMeasurementPointId' in the 'LgpPwrDcMeasurementPointEntry' object. The actual measurement being taken at that identified point is identified by the other corresponding columns in the LgpPwrDcMeasurementPointEntry for the particular row of the table.
This entry defines the measurements to be populated in the
various columns of the 'lgpPwrDcMeasurementPointTable'.
various columns of the 'lgpPwrDcMeasurementPointTable'.
Indexes
lgpPwrDcMeasurementPointIndex
| Column | Syntax | OID |
|---|---|---|
|
lgpPwrDcMeasurementPointIndex
This is the index that indicates the row of the
'lgpPwrMeasurementPointTable' for a power measurement point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.1 |
|
lgpPwrDcMeasurementPointId
An OID representing a well known measurement point.
These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such … |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.2.4.1.2 |
|
lgpPwrDcMeasurementPointSubID
The identifier used to differentiate between identical thresholds
for a given point index and point ID in the DC measurements table. |
CountSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.3 |
|
lgpPwrDcMeasurementPointVolts
The present DC voltage for the power source indicated by
'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.4 |
|
lgpPwrDcMeasurementPointCurrent
The present DC current for the power source indicated by
'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable. |
AmpSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.5 |
|
lgpPwrDcMeasurementPointNomVolts
The nominal(configured/expected) DC voltage for the power source
indicated by 'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable. |
VoltSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.6 |
|
lgpPwrDcMeasurementPointTruePower
The present DC power for the power source indicated by
'lgpPwrDcMeasurementPointId' in the corresponding row in the lgpPwrDcMeasurementPointTable. |
WattSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.2.4.1.7 |
lgpPwrThresholdTable
table.1.3.6.1.4.1.476.1.42.3.5.4.7
·
1 row entry
·
8 columns
A list of power thresholds for a given power measurement at a
point/location in the system.
The lgpPwrThresholdType in this table corresponds to the
type of measurement the high and low thresholds applies to.
This table contains zero, one, or many rows, depending upon the number
of 'lgpPwrThresholdPoint' and 'lgpPwrThresholdSubID' available in the
table.
The NMS cannot create or delete rows from the table.
The rows are created by the agent based upon the capabilities of
the managed device.
This entry defines the contents of the columns for the table
'lgpPwrThresholdTable'.
'lgpPwrThresholdTable'.
Indexes
lgpPwrThresholdIndex
| Column | Syntax | OID |
|---|---|---|
|
lgpPwrThresholdIndex
This is the index indicating the row of the table
'lgpPwrLineMeasurementTable' for a power measurement point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.1 |
|
lgpPwrThresholdPoint
An OID representing a well known measurement point.
These object identifiers indicate a point or location of power measurement in a power system. The OID's name usually implies a location of the measurement point such … |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.4.7.1.2 |
|
lgpPwrThresholdSubID
This is a sub identifier for the 'lgpPwrThresholdPoint'.
It indicates the instance number of the well known threshold point. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.3 |
|
lgpPwrThresholdType
An OID representing a well known measurement type.
These object identifiers indicate the type of measurement referenced by the row of the table. These object identifiers can encompass units of measure, lines of referen… |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.4.7.1.4 |
|
lgpPwrThresholdHighWarning
The high warning threshold of a type of measurement designated by
the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.5 |
|
lgpPwrThresholdHighFailure
The high failure threshold of a type of measurement designated by
the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.6 |
|
lgpPwrThresholdLowWarning
The low warning threshold of a type of measurement designated by
the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint'… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.7 |
|
lgpPwrThresholdLowFailure
The low failure threshold of a type of measurement designated by
the 'lgpPwrThresholdType' at a location designated by the 'lgpPwrThresholdPoint'. If multiple thresholds are available at a single 'lgpPwrThresholdPoint'… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.476.1.42.3.5.4.7.1.8 |
lgpPwrLoadCircuitTable
table.1.3.6.1.4.1.476.1.42.3.5.6.2
·
1 row entry
·
5 columns
A list of load circuits that can be controlled(opened or closed). The NMS cannot create or delete rows from the table. The rows are created by the agent based upon the capabilities of the managed device.
This entry defines the contents of the columns for the table
'lgpPwrLoadCircuitTable'.
'lgpPwrLoadCircuitTable'.
Indexes
lgpPwrLoadCircuitIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
lgpPwrLoadCircuitIndex
This is the index indicating the row of the table
'lgpPwrLoadCircuitTable'. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.6.2.1.1 |
||||||
|
lgpPwrLoadCircuitId
An OID representing a well known load circuit identifier.
These load circuit identifiers indicate the name or type of load circuit reference in the table. |
ObjectIdentifier | .1.3.6.1.4.1.476.1.42.3.5.6.2.1.2 |
||||||
|
lgpPwrLoadCircuitSubID
This is a sub identifier for the 'lgpPwrLoadCircuitId'.
It indicates the hardware identifier of the load control circuit. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.476.1.42.3.5.6.2.1.3 |
||||||
|
lgpPwrLoadCircuitState
This identifier indicates the state of the load circuit.
When read, only a closed or open response will be returned. When written to, the state of the circuit will transition to desired state. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.476.1.42.3.5.6.2.1.4 |
||||||
|
lgpPwrLoadCircuitStateAndControl
This identifier indicates the state of the load circuit.
When read, only a closed or open response will be returned. When written to, the state of the circuit will transition to desired state. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.476.1.42.3.5.6.2.1.5 |