slcNetVPNXAUTHClient
LANTRONIX-SLC-MIB ·
.1.3.6.1.4.1.244.1.1.1.4.22
Object
scalar
EnabledState
If this is enabled, the SLC will send authentication credentials to the remote host if they are requested. XAUTH, or Extended Authentication, can be used as an additional security measure on top of the Pre-Shared Key or RSA Public Key.
Context
- MIB
- LANTRONIX-SLC-MIB
- OID
.1.3.6.1.4.1.244.1.1.1.4.22- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- slcNetVPN
- Siblings
- 22
Syntax
EnabledState
- Source
- EnabledState
- Base type
Enumeration
Values & Constraints
Type Values
1 | disabled |
2 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slcNetVPNTunnel If enabled, the SLC is configured to initiate a VPN tunnel. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.1 |
| slcNetVPNLocalHop If the SLC is behind a gateway, this specifies the
IP Address of the gateway's public network interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.10 |
| slcNetVPNLocalSubnet One or more subnets behind the SLC, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.11 |
| slcNetVPNIKENegotiation The type of mode used by the SLC and the remote host for the
IKE protocol, which exchanges security options between two
hosts which want to communicate via IPSec. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.12 |
| slcNetVPNIKEEncryption The type of encryption used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.13 |
| slcNetVPNIKEAuthentication The type of authentication used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.14 |
| slcNetVPNIKEDHGroup The type of Diffie-Hellman Group used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.15 |
| slcNetVPNESPEncryption The type of encryption used for encrypting data sent through
the tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.16 |
| slcNetVPNESPAuthentication The type of authentication used for authenticating data sent
through the VPN tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.17 |
| slcNetVPNESPDHGroup The type of Diffie-Hellman Group used for the key exchange
for data sent through the tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.18 |
| slcNetVPNAuthentication The type of authentication used by the host on each side of
the tunnel to verify the identify of the other host. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.19 |
| slcNetVPNStatus A string giving the current status of the VPN tunnel. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.2 |
| slcNetVPNPerfectForwardSecrecy When a new IPSec SA is negotiated after the IPSec SA lifetime
expires, a new Diffie-Hellman key exchange can be performed
to generate a new session key to be used to encrypt the… | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.20 |
| slcNetVPNModeConfigClient If this is enabled, the SLC can receive network configuration
from the remote host. This allows the remote host to assign
an IP address/netmask to the SLC side of the VPN tunnel. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.21 |
| slcNetVPNXAUTHClientLogin If slcNetVPNXAUTHClientLogin is enabled, this is the login
used for authentication. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.23 |
| slcNetVPNName The name of the VPN tunnel. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.3 |
| slcNetVPNEthPort The Ethernet interface used for the VPN tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.4 |
| slcNetVPNRemoteHost The IP Address of the host on the remote side of the tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.5 |
| slcNetVPNRemoteId How the remote host should be identified for authentication. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.6 |
| slcNetVPNRemoteHop If the remote host is behind a gateway, this specifies the
IP Address of the gateway's public network interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.7 |
| slcNetVPNRemoteSubnet One or more subnets behind the remote host, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.8 |
| slcNetVPNLocalId How the SLC should be identified for authentication. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.9 |