slcNetVPNRemoteId
LANTRONIX-SLC-MIB ·
.1.3.6.1.4.1.244.1.1.1.4.6
Object
scalar
OctetString
How the remote host should be identified for authentication.
Context
- MIB
- LANTRONIX-SLC-MIB
- OID
.1.3.6.1.4.1.244.1.1.1.4.6- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- slcNetVPN
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-20
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slcNetVPNTunnel If enabled, the SLC is configured to initiate a VPN tunnel. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.1 |
| slcNetVPNLocalHop If the SLC is behind a gateway, this specifies the
IP Address of the gateway's public network interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.10 |
| slcNetVPNLocalSubnet One or more subnets behind the SLC, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.11 |
| slcNetVPNIKENegotiation The type of mode used by the SLC and the remote host for the
IKE protocol, which exchanges security options between two
hosts which want to communicate via IPSec. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.12 |
| slcNetVPNIKEEncryption The type of encryption used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.13 |
| slcNetVPNIKEAuthentication The type of authentication used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.14 |
| slcNetVPNIKEDHGroup The type of Diffie-Hellman Group used for IKE negotiation. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.15 |
| slcNetVPNESPEncryption The type of encryption used for encrypting data sent through
the tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.16 |
| slcNetVPNESPAuthentication The type of authentication used for authenticating data sent
through the VPN tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.17 |
| slcNetVPNESPDHGroup The type of Diffie-Hellman Group used for the key exchange
for data sent through the tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.18 |
| slcNetVPNAuthentication The type of authentication used by the host on each side of
the tunnel to verify the identify of the other host. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.19 |
| slcNetVPNStatus A string giving the current status of the VPN tunnel. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.2 |
| slcNetVPNPerfectForwardSecrecy When a new IPSec SA is negotiated after the IPSec SA lifetime
expires, a new Diffie-Hellman key exchange can be performed
to generate a new session key to be used to encrypt the… | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.20 |
| slcNetVPNModeConfigClient If this is enabled, the SLC can receive network configuration
from the remote host. This allows the remote host to assign
an IP address/netmask to the SLC side of the VPN tunnel. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.21 |
| slcNetVPNXAUTHClient If this is enabled, the SLC will send authentication
credentials to the remote host if they are requested.
XAUTH, or Extended Authentication, can be used as an
additional secur… | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.4.22 |
| slcNetVPNXAUTHClientLogin If slcNetVPNXAUTHClientLogin is enabled, this is the login
used for authentication. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.23 |
| slcNetVPNName The name of the VPN tunnel. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.3 |
| slcNetVPNEthPort The Ethernet interface used for the VPN tunnel. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.4.4 |
| slcNetVPNRemoteHost The IP Address of the host on the remote side of the tunnel. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.5 |
| slcNetVPNRemoteHop If the remote host is behind a gateway, this specifies the
IP Address of the gateway's public network interface. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.4.7 |
| slcNetVPNRemoteSubnet One or more subnets behind the remote host, expressed in
CIDR notation (IP Address/mask bits). Multiple subnets are
separated by a comma. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.8 |
| slcNetVPNLocalId How the SLC should be identified for authentication. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.4.9 |