slcNetVPNEthPort

LANTRONIX-SLC-MIB · .1.3.6.1.4.1.244.1.1.1.4.4
MIB view Table view

Object

scalar Enumeration 
The Ethernet interface used for the VPN tunnel.

Context

MIB
LANTRONIX-SLC-MIB
OID
.1.3.6.1.4.1.244.1.1.1.4.4
Type
scalar
Access
readonly
Status
current
Parent
slcNetVPN
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1ethernet1
2ethernet2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
slcNetVPNTunnel
If enabled, the SLC is configured to initiate a VPN tunnel.
scalarEnabledState.1.3.6.1.4.1.244.1.1.1.4.1
slcNetVPNLocalHop
If the SLC is behind a gateway, this specifies the IP Address of the gateway's public network interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.1.4.10
slcNetVPNLocalSubnet
One or more subnets behind the SLC, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.11
slcNetVPNIKENegotiation
The type of mode used by the SLC and the remote host for the IKE protocol, which exchanges security options between two hosts which want to communicate via IPSec.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.12
slcNetVPNIKEEncryption
The type of encryption used for IKE negotiation.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.13
slcNetVPNIKEAuthentication
The type of authentication used for IKE negotiation.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.14
slcNetVPNIKEDHGroup
The type of Diffie-Hellman Group used for IKE negotiation.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.15
slcNetVPNESPEncryption
The type of encryption used for encrypting data sent through the tunnel.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.16
slcNetVPNESPAuthentication
The type of authentication used for authenticating data sent through the VPN tunnel.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.17
slcNetVPNESPDHGroup
The type of Diffie-Hellman Group used for the key exchange for data sent through the tunnel.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.18
slcNetVPNAuthentication
The type of authentication used by the host on each side of the tunnel to verify the identify of the other host.
scalarEnumeration.1.3.6.1.4.1.244.1.1.1.4.19
slcNetVPNStatus
A string giving the current status of the VPN tunnel.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.2
slcNetVPNPerfectForwardSecrecy
When a new IPSec SA is negotiated after the IPSec SA lifetime expires, a new Diffie-Hellman key exchange can be performed to generate a new session key to be used to encrypt the…
scalarEnabledState.1.3.6.1.4.1.244.1.1.1.4.20
slcNetVPNModeConfigClient
If this is enabled, the SLC can receive network configuration from the remote host. This allows the remote host to assign an IP address/netmask to the SLC side of the VPN tunnel.
scalarEnabledState.1.3.6.1.4.1.244.1.1.1.4.21
slcNetVPNXAUTHClient
If this is enabled, the SLC will send authentication credentials to the remote host if they are requested. XAUTH, or Extended Authentication, can be used as an additional secur…
scalarEnabledState.1.3.6.1.4.1.244.1.1.1.4.22
slcNetVPNXAUTHClientLogin
If slcNetVPNXAUTHClientLogin is enabled, this is the login used for authentication.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.23
slcNetVPNName
The name of the VPN tunnel.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.3
slcNetVPNRemoteHost
The IP Address of the host on the remote side of the tunnel.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.1.4.5
slcNetVPNRemoteId
How the remote host should be identified for authentication.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.6
slcNetVPNRemoteHop
If the remote host is behind a gateway, this specifies the IP Address of the gateway's public network interface.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.244.1.1.1.4.7
slcNetVPNRemoteSubnet
One or more subnets behind the remote host, expressed in CIDR notation (IP Address/mask bits). Multiple subnets are separated by a comma.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.8
slcNetVPNLocalId
How the SLC should be identified for authentication.
scalarOctetString.1.3.6.1.4.1.244.1.1.1.4.9