jnxMplsLdpEntityPathVectorLimit

JUNIPER-MPLS-LDP-MIB · .1.3.6.1.4.1.2636.3.36.1.2.3.1.14
MIB view Table view

Object

column Integer32 
If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
              
Otherwise, if this object has a value greater than
zero, then Loop Dection for Path Vectors is enabled,
and the Path Vector Limit is this value.
Also, the value of the object,
'jnxMplsLdpLsrLoopDetectionCapable', must be set to
either 'pathVector(4)' or 'hopCountAndPathVector(5)',
if this object has a value greater than 0 (zero),
otherwise it is ignored.

Context

MIB
JUNIPER-MPLS-LDP-MIB
OID
.1.3.6.1.4.1.2636.3.36.1.2.3.1.14
Type
column
Access
readonly
Status
current
Parent
jnxMplsLdpEntityEntry
Table
jnxMplsLdpEntityTable
Siblings
21

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxMplsLdpEntityLdpId
The LDP identifier.
columnMPLS-TC-STD-MIBMplsLdpIdentifier.1.3.6.1.4.1.2636.3.36.1.2.3.1.1
jnxMplsLdpEntityHelloHoldTimer
The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received fr…
columnseconds Integer32.1.3.6.1.4.1.2636.3.36.1.2.3.1.10
jnxMplsLdpEntityInitSesThreshold
When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'jnxMplsLdpInitSesThresholdExceeded', when the number of Sess…
columnInteger32.1.3.6.1.4.1.2636.3.36.1.2.3.1.11
jnxMplsLdpEntityLabelDistMethod
For any given LDP session, the method of label distribution must be specified.
columnMPLS-TC-STD-MIBMplsLabelDistributionMethod.1.3.6.1.4.1.2636.3.36.1.2.3.1.12
jnxMplsLdpEntityLabelRetentionMode
The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label ma…
columnMPLS-TC-STD-MIBMplsRetentionMode.1.3.6.1.4.1.2636.3.36.1.2.3.1.13
jnxMplsLdpEntityHopCountLimit
If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Detectio…
columnInteger32.1.3.6.1.4.1.2636.3.36.1.2.3.1.15
jnxMplsLdpEntityTargetPeer
If this LDP entity uses targeted peer then set this to true.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2636.3.36.1.2.3.1.16
jnxMplsLdpEntityTargetPeerAddrType
The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of jnxMplsLdpEntityTargetPeerAddr is to be interpreted.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.2636.3.36.1.2.3.1.17
jnxMplsLdpEntityTargetPeerAddr
The value of the internetwork layer address used for the Extended Discovery.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2636.3.36.1.2.3.1.18
jnxMplsLdpEntityLabelType
Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization message associ…
columnMPLS-TC-STD-MIBMplsLdpLabelType.1.3.6.1.4.1.2636.3.36.1.2.3.1.19
jnxMplsLdpEntityIndex
This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'jnxMplsLdpEntityIndexNext' object should be retrieved. That value…
columnUnsigned32.1.3.6.1.4.1.2636.3.36.1.2.3.1.2
jnxMplsLdpEntityDiscontinuityTime
The value of sysUpTime on the most recent occasion at which any one or more of this entity's counters suffered a discontinuity. The relevant counters are the specific instances a…
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.2636.3.36.1.2.3.1.20
jnxMplsLdpEntityStorageType
The storage type for this entry.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.2636.3.36.1.2.3.1.21
jnxMplsLdpEntityRowStatus
An object that allows entries in this table to be created and deleted using the RowStatus convention.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2636.3.36.1.2.3.1.22
jnxMplsLdpEntityProtocolVersion
The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version o…
columnInteger32.1.3.6.1.4.1.2636.3.36.1.2.3.1.3
jnxMplsLdpEntityAdminStatus
The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all…
columnEnumeration.1.3.6.1.4.1.2636.3.36.1.2.3.1.4
jnxMplsLdpEntityOperStatus
The operational status of this LDP Entity.
columnEnumeration.1.3.6.1.4.1.2636.3.36.1.2.3.1.5
jnxMplsLdpEntityTcpDscPort
The TCP Discovery Port for LDP. The default value is the well-known value of this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2636.3.36.1.2.3.1.6
jnxMplsLdpEntityUdpDscPort
The UDP Discovery Port for LDP. The default value is the well-known value for this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2636.3.36.1.2.3.1.7
jnxMplsLdpEntityMaxPduLength
The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies th…
columnoctets Unsigned32.1.3.6.1.4.1.2636.3.36.1.2.3.1.8
jnxMplsLdpEntityKeepAliveHoldTimer
The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.
columnseconds Integer32.1.3.6.1.4.1.2636.3.36.1.2.3.1.9