jnxMplsLdpEntityHopCountLimit
JUNIPER-MPLS-LDP-MIB ·
.1.3.6.1.4.1.2636.3.36.1.2.3.1.15
Object
column
Integer32
If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detection using Hop
Counters is enabled, and this object
specifies this Entity's maximum allowable
value for the Hop Count.
Also, the value of the object
jnxMplsLdpLsrLoopDetectionCapable must be set
to either 'hopCount(3)' or
'hopCountAndPathVector(5)' if this object
has a value greater than 0 (zero), otherwise
it is ignored.
Context
- MIB
- JUNIPER-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.2636.3.36.1.2.3.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxMplsLdpEntityEntry
- Table
- jnxMplsLdpEntityTable
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxMplsLdpEntityLdpId The LDP identifier. | column | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.4.1.2636.3.36.1.2.3.1.1 |
| jnxMplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello
hold timer for this LDP Entity. The Hello Hold time
in seconds.
An LSR maintains a record of Hellos received
fr… | column | seconds Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.10 |
| jnxMplsLdpEntityInitSesThreshold When attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'jnxMplsLdpInitSesThresholdExceeded', when
the number of Sess… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.11 |
| jnxMplsLdpEntityLabelDistMethod For any given LDP session, the method of
label distribution must be specified. | column | MPLS-TC-STD-MIBMplsLabelDistributionMethod | .1.3.6.1.4.1.2636.3.36.1.2.3.1.12 |
| jnxMplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label ma… | column | MPLS-TC-STD-MIBMplsRetentionMode | .1.3.6.1.4.1.2636.3.36.1.2.3.1.13 |
| jnxMplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection f… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.14 |
| jnxMplsLdpEntityTargetPeer If this LDP entity uses targeted peer then set
this to true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.36.1.2.3.1.16 |
| jnxMplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of jnxMplsLdpEntityTargetPeerAddr is to
be interpreted. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.17 |
| jnxMplsLdpEntityTargetPeerAddr The value of the internetwork layer address used for
the Extended Discovery. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2636.3.36.1.2.3.1.18 |
| jnxMplsLdpEntityLabelType Specifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters will be sent in
the LDP Initialization message associ… | column | MPLS-TC-STD-MIBMplsLdpLabelType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.19 |
| jnxMplsLdpEntityIndex This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'jnxMplsLdpEntityIndexNext' object should be retrieved.
That value… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.2 |
| jnxMplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters are the
specific instances a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.36.1.2.3.1.20 |
| jnxMplsLdpEntityStorageType The storage type for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.21 |
| jnxMplsLdpEntityRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.36.1.2.3.1.22 |
| jnxMplsLdpEntityProtocolVersion The version number of the LDP protocol which will be
used in the session initialization message.
Section 3.5.3 in the LDP Specification specifies
that the version o… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.3 |
| jnxMplsLdpEntityAdminStatus The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer, then all… | column | Enumeration | .1.3.6.1.4.1.2636.3.36.1.2.3.1.4 |
| jnxMplsLdpEntityOperStatus The operational status of this LDP Entity. | column | Enumeration | .1.3.6.1.4.1.2636.3.36.1.2.3.1.5 |
| jnxMplsLdpEntityTcpDscPort The TCP Discovery Port for
LDP. The default value is the well-known
value of this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2636.3.36.1.2.3.1.6 |
| jnxMplsLdpEntityUdpDscPort The UDP Discovery Port for
LDP. The default value is the
well-known value for this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2636.3.36.1.2.3.1.7 |
| jnxMplsLdpEntityMaxPduLength The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. According to the LDP Specification [RFC3036]
a value of 255 or less specifies th… | column | octets Unsigned32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.8 |
| jnxMplsLdpEntityKeepAliveHoldTimer The 16-bit integer value which is the proposed keep
alive hold timer for this LDP Entity. | column | seconds Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.9 |