jnxMplsLdpEntityDiscontinuityTime

JUNIPER-MPLS-LDP-MIB · .1.3.6.1.4.1.2636.3.36.1.2.3.1.20

Object

column SNMPv2-TCTimeStamp

The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity.  The relevant counters are the
specific instances associated with this entity of
any Counter32, or Counter64 object contained
in the 'jnxMplsLdpEntityStatsTable'.  If no such
discontinuities have occurred since the last
re-initialization of the local management
subsystem, then this object contains a zero
value.

Context

MIB: JUNIPER-MPLS-LDP-MIB
OID: .1.3.6.1.4.1.2636.3.36.1.2.3.1.20
Type: column
Access: readonly
Status: current
Parent: jnxMplsLdpEntityEntry
Table: jnxMplsLdpEntityTable
Siblings: 21

Syntax

SNMPv2-TCTimeStamp

Source: SNMPv2-TCTimeStamp
Base type: Unsigned32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxMplsLdpEntityLdpId The LDP identifier.	column	MPLS-TC-STD-MIBMplsLdpIdentifier	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.1`
jnxMplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello hold timer for this LDP Entity. The Hello Hold time in seconds. An LSR maintains a record of Hellos received fr…	column	seconds Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.10`
jnxMplsLdpEntityInitSesThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out the SNMP notification, 'jnxMplsLdpInitSesThresholdExceeded', when the number of Sess…	column	Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.11`
jnxMplsLdpEntityLabelDistMethod For any given LDP session, the method of label distribution must be specified.	column	MPLS-TC-STD-MIBMplsLabelDistributionMethod	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.12`
jnxMplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label ma…	column	MPLS-TC-STD-MIBMplsRetentionMode	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.13`
jnxMplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then Loop Dection for Path Vectors is disabled. Otherwise, if this object has a value greater than zero, then Loop Dection f…	column	Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.14`
jnxMplsLdpEntityHopCountLimit If the value of this object is 0 (zero), then Loop Detection using Hop Counters is disabled. If the value of this object is greater than 0 (zero) then Loop Detectio…	column	Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.15`
jnxMplsLdpEntityTargetPeer If this LDP entity uses targeted peer then set this to true.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.16`
jnxMplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for the Extended Discovery. This object indicates how the value of jnxMplsLdpEntityTargetPeerAddr is to be interpreted.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.17`
jnxMplsLdpEntityTargetPeerAddr The value of the internetwork layer address used for the Extended Discovery.	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.18`
jnxMplsLdpEntityLabelType Specifies the optional parameters for the LDP Initialization Message. If the value is generic(1) then no optional parameters will be sent in the LDP Initialization message associ…	column	MPLS-TC-STD-MIBMplsLdpLabelType	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.19`
jnxMplsLdpEntityIndex This index is used as a secondary index to uniquely identify this row. Before creating a row in this table, the 'jnxMplsLdpEntityIndexNext' object should be retrieved. That value…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.2`
jnxMplsLdpEntityStorageType The storage type for this entry.	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.21`
jnxMplsLdpEntityRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.22`
jnxMplsLdpEntityProtocolVersion The version number of the LDP protocol which will be used in the session initialization message. Section 3.5.3 in the LDP Specification specifies that the version o…	column	Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.3`
jnxMplsLdpEntityAdminStatus The administrative status of this LDP Entity. If this object is changed from 'enable' to 'disable' and this entity has already attempted to establish contact with a Peer, then all…	column	Enumeration	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.4`
jnxMplsLdpEntityOperStatus The operational status of this LDP Entity.	column	Enumeration	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.5`
jnxMplsLdpEntityTcpDscPort The TCP Discovery Port for LDP. The default value is the well-known value of this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.6`
jnxMplsLdpEntityUdpDscPort The UDP Discovery Port for LDP. The default value is the well-known value for this port.	column	INET-ADDRESS-MIBInetPortNumber	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.7`
jnxMplsLdpEntityMaxPduLength The maximum PDU Length that is sent in the Common Session Parameters of an Initialization Message. According to the LDP Specification [RFC3036] a value of 255 or less specifies th…	column	octets Unsigned32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.8`
jnxMplsLdpEntityKeepAliveHoldTimer The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.	column	seconds Integer32	`.1.3.6.1.4.1.2636.3.36.1.2.3.1.9`