jnxMplsLdpEntityKeepAliveHoldTimer
JUNIPER-MPLS-LDP-MIB ·
.1.3.6.1.4.1.2636.3.36.1.2.3.1.9
Object
column
seconds Integer32
The 16-bit integer value which is the proposed keep alive hold timer for this LDP Entity.
Context
- MIB
- JUNIPER-MPLS-LDP-MIB
- OID
.1.3.6.1.4.1.2636.3.36.1.2.3.1.9- Type
- column
- Access
- readonly
- Status
- current
- Units
- seconds
- Parent
- jnxMplsLdpEntityEntry
- Table
- jnxMplsLdpEntityTable
- Siblings
- 21
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxMplsLdpEntityLdpId The LDP identifier. | column | MPLS-TC-STD-MIBMplsLdpIdentifier | .1.3.6.1.4.1.2636.3.36.1.2.3.1.1 |
| jnxMplsLdpEntityHelloHoldTimer The 16-bit integer value which is the proposed Hello
hold timer for this LDP Entity. The Hello Hold time
in seconds.
An LSR maintains a record of Hellos received
fr… | column | seconds Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.10 |
| jnxMplsLdpEntityInitSesThreshold When attempting to establish a session with a
given Peer, the given LDP Entity should
send out the SNMP notification,
'jnxMplsLdpInitSesThresholdExceeded', when
the number of Sess… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.11 |
| jnxMplsLdpEntityLabelDistMethod For any given LDP session, the method of
label distribution must be specified. | column | MPLS-TC-STD-MIBMplsLabelDistributionMethod | .1.3.6.1.4.1.2636.3.36.1.2.3.1.12 |
| jnxMplsLdpEntityLabelRetentionMode The LDP Entity can be configured to use either
conservative or liberal label retention mode.
If the value of this object is conservative(1)
then advertized label ma… | column | MPLS-TC-STD-MIBMplsRetentionMode | .1.3.6.1.4.1.2636.3.36.1.2.3.1.13 |
| jnxMplsLdpEntityPathVectorLimit If the value of this object is 0 (zero) then
Loop Dection for Path Vectors is disabled.
Otherwise, if this object has a value greater than
zero, then Loop Dection f… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.14 |
| jnxMplsLdpEntityHopCountLimit If the value of this object is 0 (zero),
then Loop Detection using Hop Counters is
disabled.
If the value of this object is greater than
0 (zero) then Loop Detectio… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.15 |
| jnxMplsLdpEntityTargetPeer If this LDP entity uses targeted peer then set
this to true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.36.1.2.3.1.16 |
| jnxMplsLdpEntityTargetPeerAddrType The type of the internetwork layer address used for
the Extended Discovery. This object indicates how
the value of jnxMplsLdpEntityTargetPeerAddr is to
be interpreted. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.17 |
| jnxMplsLdpEntityTargetPeerAddr The value of the internetwork layer address used for
the Extended Discovery. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2636.3.36.1.2.3.1.18 |
| jnxMplsLdpEntityLabelType Specifies the optional parameters for the LDP
Initialization Message. If the value is generic(1)
then no optional parameters will be sent in
the LDP Initialization message associ… | column | MPLS-TC-STD-MIBMplsLdpLabelType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.19 |
| jnxMplsLdpEntityIndex This index is used as a secondary index to uniquely
identify this row. Before creating a row in this table,
the 'jnxMplsLdpEntityIndexNext' object should be retrieved.
That value… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.2 |
| jnxMplsLdpEntityDiscontinuityTime The value of sysUpTime on the most recent occasion
at which any one or more of this entity's counters
suffered a discontinuity. The relevant counters are the
specific instances a… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2636.3.36.1.2.3.1.20 |
| jnxMplsLdpEntityStorageType The storage type for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2636.3.36.1.2.3.1.21 |
| jnxMplsLdpEntityRowStatus An object that allows entries in this table to
be created and deleted using the
RowStatus convention. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.36.1.2.3.1.22 |
| jnxMplsLdpEntityProtocolVersion The version number of the LDP protocol which will be
used in the session initialization message.
Section 3.5.3 in the LDP Specification specifies
that the version o… | column | Integer32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.3 |
| jnxMplsLdpEntityAdminStatus The administrative status of this LDP Entity.
If this object is changed from 'enable' to 'disable'
and this entity has already attempted to establish
contact with a Peer, then all… | column | Enumeration | .1.3.6.1.4.1.2636.3.36.1.2.3.1.4 |
| jnxMplsLdpEntityOperStatus The operational status of this LDP Entity. | column | Enumeration | .1.3.6.1.4.1.2636.3.36.1.2.3.1.5 |
| jnxMplsLdpEntityTcpDscPort The TCP Discovery Port for
LDP. The default value is the well-known
value of this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2636.3.36.1.2.3.1.6 |
| jnxMplsLdpEntityUdpDscPort The UDP Discovery Port for
LDP. The default value is the
well-known value for this port. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.2636.3.36.1.2.3.1.7 |
| jnxMplsLdpEntityMaxPduLength The maximum PDU Length that is sent in
the Common Session Parameters of an Initialization
Message. According to the LDP Specification [RFC3036]
a value of 255 or less specifies th… | column | octets Unsigned32 | .1.3.6.1.4.1.2636.3.36.1.2.3.1.8 |