npSysPeekAddress

JETDIRECT3-MIB · .1.3.6.1.4.1.11.2.4.3.1.14

MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32

This object specifies an address for subsequent peeks.

Context

MIB: JETDIRECT3-MIB
OID: .1.3.6.1.4.1.11.2.4.3.1.14
Type: scalar
Access: readwrite
Status: current
Parent: npSys
Siblings: 17

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
npSysState The state of the LAN card to network peripheral interface driver.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.4.3.1.1`
npSysModelNumber The HP model number of the device.	scalar	OctetString	`.1.3.6.1.4.1.11.2.4.3.1.10`
npSysNetworkConnectors This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connector is supported. Bit Value Connector 0 …	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.11`
npSysStatusPageTable A table of all the lines which the card prints on the self-test page.	table	-	`.1.3.6.1.4.1.11.2.4.3.1.12`
npSysManufactureInfo This object provides information about the hardware that the firmware is running on as well as manufacturing codes.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11.2.4.3.1.13`
npSysPeek This object specifies an address for subsequent peeks.	scalar	OctetString	`.1.3.6.1.4.1.11.2.4.3.1.15`
npSysCardServices1 This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC protocol st…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.16`
npSysCardServices2 This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 - Sca…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.17`
npSysStatusMessage A status string reflecting the current state of the card and peripheral.	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11.2.4.3.1.2`
npSysCardServices3 This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetooth Bi…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.22`
npSysPeripheralFatalError The most recent peripheral fatal error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (00xx)' error. Refer to peripheral …	scalar	Integer32	`.1.3.6.1.4.1.11.2.4.3.1.3`
npSysCardFatalError obsolete The most recent LAN Card error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (01xx)' error. Refer to peripheral documen…	scalar	Integer32	`.1.3.6.1.4.1.11.2.4.3.1.4`
npSysMaximumWriteBuffers obsolete The maximum number of write buffers configured for the LAN card (this translates to the write window size of the connection). Starting with firmware release X.20.06 a…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.5`
npSysMaximumReadBuffers obsolete The maximum number of read buffers configured for the LAN card (this translates to the read window size of the connection). Starting with firmware release X.20.06 and…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.1.6`
npSysTotalBytesRecvs The total number of bytes received since reset.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.4.3.1.7`
npSysTotalBytesSents The total number of bytes sent since reset.	scalar	SNMPv2-SMICounter32	`.1.3.6.1.4.1.11.2.4.3.1.8`
npSysCurrReadReq obsolete The current number of read data buffers owned by the LAN card. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides …	scalar	SNMPv2-SMIGauge32	`.1.3.6.1.4.1.11.2.4.3.1.9`

Indexes