npSysCurrReadReq
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.4.3.1.9
Object
The current number of read data buffers owned by
the LAN card.
Starting with firmware release X.20.06 and subsequent
releases, this object is obsolete as it provides no
relevant data for the new hardware architecture.
No current supported applications use this object.
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.4.3.1.9- Type
- scalar
- Access
- readonly
- Status
- obsolete
- Parent
- npSys
- Siblings
- 17
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| npSysState The state of the LAN card to network peripheral
interface driver. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.1.1 |
| npSysModelNumber The HP model number of the device. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.1.10 |
| npSysNetworkConnectors This object describes the network connectors supported by the
device. The value is a bit mask. A set bit indicates the
connector is supported.
Bit Value Connector
0 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.11 |
| npSysStatusPageTable A table of all the lines which the card prints on the self-test page. | table | - | .1.3.6.1.4.1.11.2.4.3.1.12 |
| npSysManufactureInfo This object provides information about the hardware that the
firmware is running on as well as manufacturing codes. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.4.3.1.13 |
| npSysPeekAddress This object specifies an address for subsequent peeks. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.14 |
| npSysPeek This object specifies an address for subsequent peeks. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.1.15 |
| npSysCardServices1 This object is a bitmap showing what services are available
on the card.
Bit 0 - IPX/SPX/NCP protocol stack
Bit 1 - IP/TCP protocol stack
Bit 2 - LLC/DLC protocol st… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.16 |
| npSysCardServices2 This object is a bitmap showing what services are available
on the card.
Bit 0 - XIP2
Bit 1 - PML Get/Set
Bit 2 - PML Traps
Bit 3 - Scan to Web Browser
Bit 4 - Sca… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.17 |
| npSysStatusMessage A status string reflecting the current state of the card
and peripheral. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.4.3.1.2 |
| npSysCardServices3 This object is a bitmap showing what services are available
on the card.
Bit 0 - 100T
Bit 1 - Token Ring 802.5
Bit 2 - 802.11b
Bit 3 - 80211.a
Bit 4 - Bluetooth
Bi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.22 |
| npSysPeripheralFatalError The most recent peripheral fatal error that is
being displayed on the peripheral's display panel.
The error typically appears as a '80 Service
(00xx)' error. Refer to peripheral … | scalar | Integer32 | .1.3.6.1.4.1.11.2.4.3.1.3 |
| npSysCardFatalError obsolete The most recent LAN Card error that is being
displayed on the peripheral's display panel. The
error typically appears as a '80 Service (01xx)'
error. Refer to peripheral documen… | scalar | Integer32 | .1.3.6.1.4.1.11.2.4.3.1.4 |
| npSysMaximumWriteBuffers obsolete The maximum number of write buffers configured for
the LAN card (this translates to the write window
size of the connection).
Starting with firmware release X.20.06 a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.5 |
| npSysMaximumReadBuffers obsolete The maximum number of read buffers configured for
the LAN card (this translates to the read window
size of the connection).
Starting with firmware release X.20.06 and… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.6 |
| npSysTotalBytesRecvs The total number of bytes received since reset. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.4.3.1.7 |
| npSysTotalBytesSents The total number of bytes sent since reset. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.4.3.1.8 |