npSysCardServices2
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.4.3.1.17
Object
scalar
SNMPv2-SMIInteger32
This object is a bitmap showing what services are available
on the card.
Bit 0 - XIP2
Bit 1 - PML Get/Set
Bit 2 - PML Traps
Bit 3 - Scan to Web Browser
Bit 4 - Scan to Email
Bit 5 - MFP Scan Support
Bits 6 - 11 Reserved
Bit 12 - Telnet API
Bit 13 - Web API
Bit 14 - SNMP V2
Bit 15 - SNMP Traps
Bit 16 - Download
Bit 17 - TFTP
Bit 18 - RCFG
Bit 19 - SLP
Bit 20 - Syslog
Bit 21 - DHCP
Bit 22 - BOOTP
Bit 23 - RARP
Bit 24 - SNMP V3
Bit 25 - SSL Functionality
Bit 26 - Auto IP
Bit 27 - SNMP V3 SHA-1 & AES-128 support.
Bits 28 - 31 Reserved
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.4.3.1.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- npSys
- Siblings
- 17
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| npSysState The state of the LAN card to network peripheral
interface driver. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.1.1 |
| npSysModelNumber The HP model number of the device. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.1.10 |
| npSysNetworkConnectors This object describes the network connectors supported by the
device. The value is a bit mask. A set bit indicates the
connector is supported.
Bit Value Connector
0 … | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.11 |
| npSysStatusPageTable A table of all the lines which the card prints on the self-test page. | table | - | .1.3.6.1.4.1.11.2.4.3.1.12 |
| npSysManufactureInfo This object provides information about the hardware that the
firmware is running on as well as manufacturing codes. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.4.3.1.13 |
| npSysPeekAddress This object specifies an address for subsequent peeks. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.14 |
| npSysPeek This object specifies an address for subsequent peeks. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.1.15 |
| npSysCardServices1 This object is a bitmap showing what services are available
on the card.
Bit 0 - IPX/SPX/NCP protocol stack
Bit 1 - IP/TCP protocol stack
Bit 2 - LLC/DLC protocol st… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.16 |
| npSysStatusMessage A status string reflecting the current state of the card
and peripheral. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.4.3.1.2 |
| npSysCardServices3 This object is a bitmap showing what services are available
on the card.
Bit 0 - 100T
Bit 1 - Token Ring 802.5
Bit 2 - 802.11b
Bit 3 - 80211.a
Bit 4 - Bluetooth
Bi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.22 |
| npSysPeripheralFatalError The most recent peripheral fatal error that is
being displayed on the peripheral's display panel.
The error typically appears as a '80 Service
(00xx)' error. Refer to peripheral … | scalar | Integer32 | .1.3.6.1.4.1.11.2.4.3.1.3 |
| npSysCardFatalError obsolete The most recent LAN Card error that is being
displayed on the peripheral's display panel. The
error typically appears as a '80 Service (01xx)'
error. Refer to peripheral documen… | scalar | Integer32 | .1.3.6.1.4.1.11.2.4.3.1.4 |
| npSysMaximumWriteBuffers obsolete The maximum number of write buffers configured for
the LAN card (this translates to the write window
size of the connection).
Starting with firmware release X.20.06 a… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.5 |
| npSysMaximumReadBuffers obsolete The maximum number of read buffers configured for
the LAN card (this translates to the read window
size of the connection).
Starting with firmware release X.20.06 and… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.1.6 |
| npSysTotalBytesRecvs The total number of bytes received since reset. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.4.3.1.7 |
| npSysTotalBytesSents The total number of bytes sent since reset. | scalar | SNMPv2-SMICounter32 | .1.3.6.1.4.1.11.2.4.3.1.8 |
| npSysCurrReadReq obsolete The current number of read data buffers owned by
the LAN card.
Starting with firmware release X.20.06 and subsequent
releases, this object is obsolete as it provides … | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.11.2.4.3.1.9 |