npSysMaximumReadBuffers

JETDIRECT3-MIB · .1.3.6.1.4.1.11.2.4.3.1.6
MIB view Table view

Object

scalar obsolete SNMPv2-SMIInteger32 
The maximum number of read buffers configured for
the LAN card (this translates to the read window
size of the connection).
           
 Starting with firmware release X.20.06 and subsequent
releases, this object is obsolete as it provides no
relevant data for the new hardware architecture.
No current supported applications use this object.

Context

MIB
JETDIRECT3-MIB
OID
.1.3.6.1.4.1.11.2.4.3.1.6
Type
scalar
Access
readonly
Status
obsolete
Parent
npSys
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Object Constraints
range: 0-30
Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
npSysState
The state of the LAN card to network peripheral interface driver.
scalarEnumeration.1.3.6.1.4.1.11.2.4.3.1.1
npSysModelNumber
The HP model number of the device.
scalarOctetString.1.3.6.1.4.1.11.2.4.3.1.10
npSysNetworkConnectors
This object describes the network connectors supported by the device. The value is a bit mask. A set bit indicates the connector is supported. Bit Value Connector 0 …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.11
npSysStatusPageTable
A table of all the lines which the card prints on the self-test page.
table-.1.3.6.1.4.1.11.2.4.3.1.12
npSysManufactureInfo
This object provides information about the hardware that the firmware is running on as well as manufacturing codes.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.4.3.1.13
npSysPeekAddress
This object specifies an address for subsequent peeks.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.14
npSysPeek
This object specifies an address for subsequent peeks.
scalarOctetString.1.3.6.1.4.1.11.2.4.3.1.15
npSysCardServices1
This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC protocol st…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.16
npSysCardServices2
This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 - Sca…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.17
npSysStatusMessage
A status string reflecting the current state of the card and peripheral.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.11.2.4.3.1.2
npSysCardServices3
This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetooth Bi…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.22
npSysPeripheralFatalError
The most recent peripheral fatal error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (00xx)' error. Refer to peripheral …
scalarInteger32.1.3.6.1.4.1.11.2.4.3.1.3
npSysCardFatalError obsolete
The most recent LAN Card error that is being displayed on the peripheral's display panel. The error typically appears as a '80 Service (01xx)' error. Refer to peripheral documen…
scalarInteger32.1.3.6.1.4.1.11.2.4.3.1.4
npSysMaximumWriteBuffers obsolete
The maximum number of write buffers configured for the LAN card (this translates to the write window size of the connection). Starting with firmware release X.20.06 a…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.11.2.4.3.1.5
npSysTotalBytesRecvs
The total number of bytes received since reset.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.4.3.1.7
npSysTotalBytesSents
The total number of bytes sent since reset.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.11.2.4.3.1.8
npSysCurrReadReq obsolete
The current number of read data buffers owned by the LAN card. Starting with firmware release X.20.06 and subsequent releases, this object is obsolete as it provides …
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.11.2.4.3.1.9