lldpV2Xdot3LocResponseTime

IEEE8023-DOT3-LLDP-EXT-V2-MIB · .1.3.111.2.802.3.1.5.1.2.2.1.12
MIB view Table view

Object

column SNMPv2-SMIInteger32 
A GET returns the response time in seconds of the local system.
For a PD, it is the maximum time required to update the value of
lldpV2Xdot3LocPDRequestedPowerValue when the remote system
requests the PD to change its max power draw. For a PSE, it is
the maximum time required to update the value of
lldpV2Xdot3LocPDRequestedPowerValue when the remote system
requests of the PSE a new power value.

Context

MIB
IEEE8023-DOT3-LLDP-EXT-V2-MIB
OID
.1.3.111.2.802.3.1.5.1.2.2.1.12
Type
column
Access
readonly
Status
current
Parent
lldpV2Xdot3LocPowerEntry
Table
lldpV2Xdot3LocPowerTable
Siblings
13

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lldpV2Xdot3LocPowerPortClass
The value that identifies the port Class of the given port associated with the local system.
columnLLDP-V2-TC-MIBLldpV2PowerPortClass.1.3.111.2.802.3.1.5.1.2.2.1.1
lldpV2Xdot3LocPDRequestedPowerValue
A GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power value is the maximum inp…
columnSNMPv2-SMIInteger32.1.3.111.2.802.3.1.5.1.2.2.1.10
lldpV2Xdot3LocPSEAllocatedPowerValue
A GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated power value is the maxim…
columnSNMPv2-SMIInteger32.1.3.111.2.802.3.1.5.1.2.2.1.11
lldpV2Xdot3LocReady
The truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDPDUs.
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.2.2.1.13
lldpV2Xdot3LocReducedOperationPowerValue
A GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation power value represent…
columnSNMPv2-SMIInteger32.1.3.111.2.802.3.1.5.1.2.2.1.14
lldpV2Xdot3LocPowerMDISupported
The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.2.2.1.2
lldpV2Xdot3LocPowerMDIEnabled
The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.2.2.1.3
lldpV2Xdot3LocPowerPairControlable
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled …
columnSNMPv2-TCTruthValue.1.3.111.2.802.3.1.5.1.2.2.1.4
lldpV2Xdot3LocPowerPairs
This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system.
columnUnsigned32.1.3.111.2.802.3.1.5.1.2.2.1.5
lldpV2Xdot3LocPowerClass
This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system.
columnUnsigned32.1.3.111.2.802.3.1.5.1.2.2.1.6
lldpV2Xdot3LocPowerType
A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.
columnEnumeration.1.3.111.2.802.3.1.5.1.2.2.1.7
lldpV2Xdot3LocPowerSource
A GET returns an integer indicating the power sources of the local system. A PSE indicates whether it is being powered by a primary power source; a backup power source; or unknown…
columnEnumeration.1.3.111.2.802.3.1.5.1.2.2.1.8
lldpV2Xdot3LocPowerPriority
A GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests from the PSE. A SET …
columnEnumeration.1.3.111.2.802.3.1.5.1.2.2.1.9