lldpV2Xdot3LocPowerSource

IEEE8023-DOT3-LLDP-EXT-V2-MIB · .1.3.111.2.802.3.1.5.1.2.2.1.8

MIB view Table view

Object

column Enumeration

A GET returns an integer indicating the power sources of the
local system. A PSE indicates whether it is being powered by
a primary power source; a backup power source; or unknown. A PD
indicates whether it is being powered by a PSE and locally;
by a PSE only; or unknown.

Context

MIB: IEEE8023-DOT3-LLDP-EXT-V2-MIB
OID: .1.3.111.2.802.3.1.5.1.2.2.1.8
Type: column
Access: readonly
Status: current
Parent: lldpV2Xdot3LocPowerEntry
Table: lldpV2Xdot3LocPowerTable
Siblings: 13

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	pseprimary
`1`	psebackup
`2`	pseunknown
`3`	pdpseandlocal
`4`	pdpseonly
`5`	pdunknown

Related Objects

Sibling Objects

Object	Type	Syntax	OID
lldpV2Xdot3LocPowerPortClass The value that identifies the port Class of the given port associated with the local system.	column	LLDP-V2-TC-MIBLldpV2PowerPortClass	`.1.3.111.2.802.3.1.5.1.2.2.1.1`
lldpV2Xdot3LocPDRequestedPowerValue A GET returns the PD requested power value. For a PD, it is the power value that the PD has currently requested from the remote system. PD requested power value is the maximum inp…	column	SNMPv2-SMIInteger32	`.1.3.111.2.802.3.1.5.1.2.2.1.10`
lldpV2Xdot3LocPSEAllocatedPowerValue A GET returns the PSE allocated power value. For a PSE, it is the power value that the PSE has currently allocated to the remote system. The PSE allocated power value is the maxim…	column	SNMPv2-SMIInteger32	`.1.3.111.2.802.3.1.5.1.2.2.1.11`
lldpV2Xdot3LocResponseTime A GET returns the response time in seconds of the local system. For a PD, it is the maximum time required to update the value of lldpV2Xdot3LocPDRequestedPowerValue when the remot…	column	SNMPv2-SMIInteger32	`.1.3.111.2.802.3.1.5.1.2.2.1.12`
lldpV2Xdot3LocReady The truth value used to identify whether the local Data Link Layer classification engine has completed initialization and is ready to receive and transmit LLDPDUs.	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.3.1.5.1.2.2.1.13`
lldpV2Xdot3LocReducedOperationPowerValue A GET returns the reduced operation power value. For a PD, it is a power value that is lower than the currently requested power value. This reduced operation power value represent…	column	SNMPv2-SMIInteger32	`.1.3.111.2.802.3.1.5.1.2.2.1.14`
lldpV2Xdot3LocPowerMDISupported The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.3.1.5.1.2.2.1.2`
lldpV2Xdot3LocPowerMDIEnabled The truth value used to identify whether MDI power is enabled on the given port associated with the local system.	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.3.1.5.1.2.2.1.3`
lldpV2Xdot3LocPowerPairControlable The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in Clause 8) and is used to indicate whether the pair selection can be controlled …	column	SNMPv2-TCTruthValue	`.1.3.111.2.802.3.1.5.1.2.2.1.4`
lldpV2Xdot3LocPowerPairs This object contains the value of the pethPsePortPowerPairs object (defined in Clause 8) which is associated with the given port on the local system.	column	Unsigned32	`.1.3.111.2.802.3.1.5.1.2.2.1.5`
lldpV2Xdot3LocPowerClass This object contains the value of the pethPsePortPowerClassifications object (defined in Clause 8) which is associated with the given port on the local system.	column	Unsigned32	`.1.3.111.2.802.3.1.5.1.2.2.1.6`
lldpV2Xdot3LocPowerType A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.	column	Enumeration	`.1.3.111.2.802.3.1.5.1.2.2.1.7`
lldpV2Xdot3LocPowerPriority A GET returns the priority of a PD system. For a PSE, this is the priority that the PSE assigns to the PD. For a PD, this is the priority that the PD requests from the PSE. A SET …	column	Enumeration	`.1.3.111.2.802.3.1.5.1.2.2.1.9`