lldpV2Xdot3LocPowerType
IEEE8023-DOT3-LLDP-EXT-V2-MIB ·
.1.3.111.2.802.3.1.5.1.2.2.1.7
Object
column
Enumeration
A GET returns an integer indicating whether the local system is a PSE or a PD and whether it is Type 1 or Type 2.
Context
- MIB
- IEEE8023-DOT3-LLDP-EXT-V2-MIB
- OID
.1.3.111.2.802.3.1.5.1.2.2.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- lldpV2Xdot3LocPowerEntry
- Table
- lldpV2Xdot3LocPowerTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | psetype1 |
1 | psetype2 |
2 | pdtype |
3 | pdtype2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lldpV2Xdot3LocPowerPortClass The value that identifies the port Class of the given port
associated with the local system. | column | LLDP-V2-TC-MIBLldpV2PowerPortClass | .1.3.111.2.802.3.1.5.1.2.2.1.1 |
| lldpV2Xdot3LocPDRequestedPowerValue A GET returns the PD requested power value.
For a PD, it is the power value that the PD has currently
requested from the remote system. PD requested power value
is the maximum inp… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.5.1.2.2.1.10 |
| lldpV2Xdot3LocPSEAllocatedPowerValue A GET returns the PSE allocated power value.
For a PSE, it is the power value that the PSE has currently
allocated to the remote system. The PSE allocated power value
is the maxim… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.5.1.2.2.1.11 |
| lldpV2Xdot3LocResponseTime A GET returns the response time in seconds of the local system.
For a PD, it is the maximum time required to update the value of
lldpV2Xdot3LocPDRequestedPowerValue when the remot… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.5.1.2.2.1.12 |
| lldpV2Xdot3LocReady The truth value used to identify whether the local Data Link Layer
classification engine has completed initialization and is ready to
receive and transmit LLDPDUs. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.5.1.2.2.1.13 |
| lldpV2Xdot3LocReducedOperationPowerValue A GET returns the reduced operation power value. For a PD, it
is a power value that is lower than the currently requested
power value. This reduced operation power value represent… | column | SNMPv2-SMIInteger32 | .1.3.111.2.802.3.1.5.1.2.2.1.14 |
| lldpV2Xdot3LocPowerMDISupported The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.5.1.2.2.1.2 |
| lldpV2Xdot3LocPowerMDIEnabled The truth value used to identify whether MDI power is
enabled on the given port associated with the local system. | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.5.1.2.2.1.3 |
| lldpV2Xdot3LocPowerPairControlable The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in
Clause 8) and is used to indicate whether the pair selection
can be controlled … | column | SNMPv2-TCTruthValue | .1.3.111.2.802.3.1.5.1.2.2.1.4 |
| lldpV2Xdot3LocPowerPairs This object contains the value of the pethPsePortPowerPairs
object (defined in Clause 8) which is associated with
the given port on the local system. | column | Unsigned32 | .1.3.111.2.802.3.1.5.1.2.2.1.5 |
| lldpV2Xdot3LocPowerClass This object contains the value of the
pethPsePortPowerClassifications object (defined in
Clause 8) which is associated with the given port on the
local system. | column | Unsigned32 | .1.3.111.2.802.3.1.5.1.2.2.1.6 |
| lldpV2Xdot3LocPowerSource A GET returns an integer indicating the power sources of the
local system. A PSE indicates whether it is being powered by
a primary power source; a backup power source; or unknown… | column | Enumeration | .1.3.111.2.802.3.1.5.1.2.2.1.8 |
| lldpV2Xdot3LocPowerPriority A GET returns the priority of a PD system. For a PSE, this
is the priority that the PSE assigns to the PD. For a PD, this
is the priority that the PD requests from the PSE. A SET
… | column | Enumeration | .1.3.111.2.802.3.1.5.1.2.2.1.9 |