ieee8021SpbSysBridgePriority

IEEE8021-SPB-MIB · .1.3.111.2.802.1.1.26.1.1.5
MIB view Table view

Object

scalar IEEE8021SpbBridgePriority 
This is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm. Recommend 
values 0..15 be assigned to core switches to ensure
diversity of the ECT Algorithms.

Context

MIB
IEEE8021-SPB-MIB
OID
.1.3.111.2.802.1.1.26.1.1.5
Type
scalar
Access
readonly
Status
current
Parent
ieee8021SpbSys
Siblings
8

Syntax

IEEE8021SpbBridgePriority
Source
IEEE8021SpbBridgePriority
Base type
OctetString

Values & Constraints

Type Constraints
range: 2

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ieee8021SpbSysAreaAddress
The three byte IS-IS Area Address to join. Normally SPB will use area 00:00:00 however if SPB is being used in conjunction with IPV4/V6 it can operate using the IS-IS area address…
scalarIEEE8021SpbAreaAddress.1.3.111.2.802.1.1.26.1.1.1
ieee8021SpbSysId
SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. This is defaulted to the Bridge Address initially but can be overridden. This object …
scalarSNMPv2-TCMacAddress.1.3.111.2.802.1.1.26.1.1.2
ieee8021SpbSysControlAddr
Group MAC that the ISIS control plane will use. SPB can use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.5.1 and Table 8-16 cover the differe…
scalarSNMPv2-TCMacAddress.1.3.111.2.802.1.1.26.1.1.3
ieee8021SpbSysName
Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management.
scalarOctetString.1.3.111.2.802.1.1.26.1.1.4
ieee8021SpbmSysSPSourceId
The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceI…
scalarIEEE8021SpbmSPsourceId.1.3.111.2.802.1.1.26.1.1.6
ieee8021SpbvSysMode
Indication of supporting SPBV mode auto(=1)/manual(=2) auto => auto allocate SPVIDs. manual => manually assign SPVIDs. This object is persistent.
scalarIEEE8021SpbMode.1.3.111.2.802.1.1.26.1.1.7
ieee8021SpbmSysMode
Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SPsourceID. This objec…
scalarIEEE8021SpbMode.1.3.111.2.802.1.1.26.1.1.8
ieee8021SpbSysDigestConvention
The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block unsafe group and …
scalarIEEE8021SpbDigestConvention.1.3.111.2.802.1.1.26.1.1.9