ieee8021SpbSysAreaAddress

IEEE8021-SPB-MIB · .1.3.111.2.802.1.1.26.1.1.1
MIB view Table view

Object

scalar r/w IEEE8021SpbAreaAddress 
The three byte IS-IS Area Address to join. Normally
SPB will use area 00:00:00 however if SPB is being
used in conjunction with IPV4/V6 it can operate
using the IS-IS area address already in use.                       
This object is persistent.

Context

MIB
IEEE8021-SPB-MIB
OID
.1.3.111.2.802.1.1.26.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
ieee8021SpbSys
Siblings
8

Syntax

IEEE8021SpbAreaAddress
Source
IEEE8021SpbAreaAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 3

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ieee8021SpbSysId
SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. This is defaulted to the Bridge Address initially but can be overridden. This object …
scalarSNMPv2-TCMacAddress.1.3.111.2.802.1.1.26.1.1.2
ieee8021SpbSysControlAddr
Group MAC that the ISIS control plane will use. SPB can use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.5.1 and Table 8-16 cover the differe…
scalarSNMPv2-TCMacAddress.1.3.111.2.802.1.1.26.1.1.3
ieee8021SpbSysName
Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management.
scalarOctetString.1.3.111.2.802.1.1.26.1.1.4
ieee8021SpbSysBridgePriority
This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the …
scalarIEEE8021SpbBridgePriority.1.3.111.2.802.1.1.26.1.1.5
ieee8021SpbmSysSPSourceId
The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceI…
scalarIEEE8021SpbmSPsourceId.1.3.111.2.802.1.1.26.1.1.6
ieee8021SpbvSysMode
Indication of supporting SPBV mode auto(=1)/manual(=2) auto => auto allocate SPVIDs. manual => manually assign SPVIDs. This object is persistent.
scalarIEEE8021SpbMode.1.3.111.2.802.1.1.26.1.1.7
ieee8021SpbmSysMode
Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SPsourceID. This objec…
scalarIEEE8021SpbMode.1.3.111.2.802.1.1.26.1.1.8
ieee8021SpbSysDigestConvention
The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block unsafe group and …
scalarIEEE8021SpbDigestConvention.1.3.111.2.802.1.1.26.1.1.9