ieee8021SpbSys
IEEE8021-SPB-MIB ·
.1.3.111.2.802.1.1.26.1.1
Object
node
No description available.
Context
- MIB
- IEEE8021-SPB-MIB
- OID
.1.3.111.2.802.1.1.26.1.1- Type
- node
- Parent
- ieee8021SpbObjects
- Siblings
- 14
- Children
- 9
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ieee8021SpbTopEdgeTable A Table of edges in network (not duplicated),
but each link will appear as two entries, one
ordered {near-far}, the other {far-near}. | table | - | .1.3.111.2.802.1.1.26.1.10 |
| ieee8021SpbmTopSrvTable All SPBM PBB encapsulated services in this network. | table | - | .1.3.111.2.802.1.1.26.1.11 |
| ieee8021SpbvTopSrvTable The SPBV group services in this network | table | - | .1.3.111.2.802.1.1.26.1.12 |
| ieee8021SpbmBsiStaticTable Table of BSIs configured on this system and assigned to
an SPBM VID.
The table is indexed by
- ieee8021SpbTopIx from ieee8021SpbMtidStaticTable
indicating the ISIS-SPB topolog… | table | - | .1.3.111.2.802.1.1.26.1.13 |
| dot1agCfmMepSpbmTable The additional objects configurable in SPBM MEPs | table | - | .1.3.111.2.802.1.1.26.1.14 |
| dot1agCfmMepSpbmEspTable The SPBM ESP table contains path-tesid information for each
SPBM path MA known to a system.
This table uses three indices. The first two indices are the
indices of the … | table | - | .1.3.111.2.802.1.1.26.1.15 |
| ieee8021SpbMtidStaticTable A Table of multiple logical topologies - MT. | table | - | .1.3.111.2.802.1.1.26.1.2 |
| ieee8021SpbTopIxDynamicTable This table is for SPB dynamic information. The dynamic
information that is sent in this bridges Hellos. | table | - | .1.3.111.2.802.1.1.26.1.3 |
| ieee8021SpbEctStaticTable The Equal Cost Tree (ECT) static configuration table. | table | - | .1.3.111.2.802.1.1.26.1.4 |
| ieee8021SpbEctDynamicTable A table containing Data about the ECT behavior on this bridge | table | - | .1.3.111.2.802.1.1.26.1.5 |
| ieee8021SpbAdjStaticTable A table containing the SPB configuration data for a neighbor | table | - | .1.3.111.2.802.1.1.26.1.6 |
| ieee8021SpbAdjDynamicTable The SPB neighbor dynamic information table. | table | - | .1.3.111.2.802.1.1.26.1.7 |
| ieee8021SpbTopNodeTable Table of network specific bridge information. | table | - | .1.3.111.2.802.1.1.26.1.8 |
| ieee8021SpbTopEctTable Table of all ECT use in the network | table | - | .1.3.111.2.802.1.1.26.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ieee8021SpbSysAreaAddress The three byte IS-IS Area Address to join. Normally
SPB will use area 00:00:00 however if SPB is being
used in conjunction with IPV4/V6 it can operate
using the IS-IS area address… | scalar | IEEE8021SpbAreaAddress | .1.3.111.2.802.1.1.26.1.1.1 |
| ieee8021SpbSysId SYS ID used for all SPB instances on this bridge.
A six byte network wide unique identifier. This is
defaulted to the Bridge Address initially but can
be overridden.
This object … | scalar | SNMPv2-TCMacAddress | .1.3.111.2.802.1.1.26.1.1.2 |
| ieee8021SpbSysControlAddr Group MAC that the ISIS control plane will use. SPB can
use a number of different addresses for SPB Hello and
LSP exchange. Section 27.2, 8.13.5.1 and Table 8-16 cover
the differe… | scalar | SNMPv2-TCMacAddress | .1.3.111.2.802.1.1.26.1.1.3 |
| ieee8021SpbSysName Name to be used to refer to this SPB bridge. This is advertised
in IS-IS and used for management. | scalar | OctetString | .1.3.111.2.802.1.1.26.1.1.4 |
| ieee8021SpbSysBridgePriority This is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the … | scalar | IEEE8021SpbBridgePriority | .1.3.111.2.802.1.1.26.1.1.5 |
| ieee8021SpbmSysSPSourceId The Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from this
bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceI… | scalar | IEEE8021SpbmSPsourceId | .1.3.111.2.802.1.1.26.1.1.6 |
| ieee8021SpbvSysMode Indication of supporting SPBV mode
auto(=1)/manual(=2)
auto => auto allocate SPVIDs.
manual => manually assign SPVIDs.
This object is persistent. | scalar | IEEE8021SpbMode | .1.3.111.2.802.1.1.26.1.1.7 |
| ieee8021SpbmSysMode Indication of supporting SPBM mode
auto(=1)/manual(=2)
auto => enable SPBM mode and auto allocate SPsourceID.
manual => enable SPBM mode and manually assign SPsourceID.
This objec… | scalar | IEEE8021SpbMode | .1.3.111.2.802.1.1.26.1.1.8 |
| ieee8021SpbSysDigestConvention The Agreement Digest convention setting
off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3)
off => disable agreement digest checking in hellos
loopFreeBoth => block unsafe group and … | scalar | IEEE8021SpbDigestConvention | .1.3.111.2.802.1.1.26.1.1.9 |