hwVOPINPDelayConfProfTable
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.16
Object
table
The INP-Delay parameters for each pair of upstream and downstream channels will be in an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for INP-Delay Profiles. If less than the maximum number of channels is to be used then the scalars corresponding to non-required channels MUST be set to a null value (0). Entries in this table MUST be maintained in a persistent manner. A default profile with an index of '1' will always exist and its parameters will be set to vendor-specific values, unless otherwise specified in this document. The index of this table is hwVOPINPDelayConfProfIndex.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.16- Type
- table
- Status
- current
- Parent
- hwVOPProfiles
- Siblings
- 21
- Children
- 1
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPDataRateProfileIndexNext This object contains an appropriate value to be used for hwVOPDataRateConfProfIndex
when creating entries in the hwVOPDataRateConfProfTable.
The value '0' indicates that no unassi… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.1 |
| hwVOPDPBOConfProfTable The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profi… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.10 |
| hwVOPRFIProfileIndexNext This object contains an appropriate value to be used for hwVOPRFIConfProfIndex
when creating entries in the hwVOPRFIConfProfTable.
The value '0' indicates that no unassigned entri… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.11 |
| hwVOPRFIConfProfTable RFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table M… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.12 |
| hwVOPSNRMarginProfileIndexNext This object contains an appropriate value to be used for hwVOPSNRMarginConfProfIndex
when creating entries in the hwVOPSNRMarginConfProfTable.
The value '0' indicates that no unas… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.13 |
| hwVOPSNRMarginConfProfTable Noise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These paramete… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.14 |
| hwVOPINPDelayProfileIndexNext This object contains an appropriate value to be used for hwVOPINPDelayConfProfIndex
when creating entries in the hwVOPINPDelayConfProfTableTable.
The value '0' indicates that no u… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.15 |
| hwVOPVirtualNoiseProfileIndexNext This object contains an appropriate value to be used for hwVOPVirtualNoiseConfProfIndex
when creating entries in the hwVOPVirtualNoiseConfProfTable.
The value '0' indic… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.17 |
| hwVOPVirtualNoiseConfProfTable The Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMa… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.18 |
| hwVOPINMProfileIndexNext This object contains an appropriate value to be used for hwVOPINMConfProfIndex
when creating entries in the hwVOPINMConfProfTable.
The value '0' indicates that no unass… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.19 |
| hwVOPDataRateConfProfTable The table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.
… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.2 |
| hwVOPINMConfProfTable Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
f… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.20 |
| hwVOPSosProfileIndexNext This object contains an appropriate value to be used for hwVOPSosConfProfIndex
when creating entries in the hwVOPSosConfProfTable.
The value '0' indicates that no unass… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.21 |
| hwVOPSosConfProfTable Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
reduction in a specified part of the frequency spectrum. This can be used in case of su… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.22 |
| hwVOPLineSpectrumProfileIndexNext This object contains an appropriate value to be used for hwVOPLineSpectrumConfProfIndex
when creating entries in the hwVOPLineSpectrumConfProfTable.
The value '0' indicates that n… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.3 |
| hwVOPLineSpectrumConfProfTable The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this … | table | - | .1.3.6.1.4.1.2011.6.144.1.1.4 |
| hwVOPModeSpecificPSDProfileIndexNext This object contains an appropriate value to be used for hwVOPModeSpecificPSDConfProfIndex
when creating entries in the hwVOPModeSpecificPSDConfProfTable.
The value '0' indicates … | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.5 |
| hwVOPModeSpecificPSDConfProfTable The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.6 |
| hwVOPUPBOProfileIndexNext This object contains an appropriate value to be used for hwVOPUPBOConfProfIndex
when creating entries in the hwVOPUPBOConfProfTable.
The value '0' indicates that no unassigned ent… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.7 |
| hwVOPUPBOConfProfTable The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.8 |
| hwVOPDPBOProfileIndexNext This object contains an appropriate value to be used for hwVOPDPBOConfProfIndex
when creating entries in the hwVOPDPBOConfProfTable.
The value '0' indicates that no unassigned ent… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPINPDelayConfProfEntry The INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
IN… | row | - | .1.3.6.1.4.1.2011.6.144.1.1.16.1 |