hwVOPDPBOProfileIndexNext
HUAWEI-VOP-MIB ·
.1.3.6.1.4.1.2011.6.144.1.1.9
Object
scalar
HWVOPProfileIndexOrZeroType
This object contains an appropriate value to be used for hwVOPDPBOConfProfIndex when creating entries in the hwVOPDPBOConfProfTable. The value '0' indicates that no unassigned entries are available. To obtain the value of hwVOPDPBOConfProfIndex for a new entry in the table, the manager issues a management protocol retrieval operation. The agent will determine through its local policy when this index value will be made available for reuse.
Context
- MIB
- HUAWEI-VOP-MIB
- OID
.1.3.6.1.4.1.2011.6.144.1.1.9- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- hwVOPProfiles
- Siblings
- 21
Syntax
HWVOPProfileIndexOrZeroType
- Source
- HWVOPProfileIndexOrZeroType
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVOPDataRateProfileIndexNext This object contains an appropriate value to be used for hwVOPDataRateConfProfIndex
when creating entries in the hwVOPDataRateConfProfTable.
The value '0' indicates that no unassi… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.1 |
| hwVOPDPBOConfProfTable The table hwVOPDPBOConfProfTable contains all the parameters related to downstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profi… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.10 |
| hwVOPRFIProfileIndexNext This object contains an appropriate value to be used for hwVOPRFIConfProfIndex
when creating entries in the hwVOPRFIConfProfTable.
The value '0' indicates that no unassigned entri… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.11 |
| hwVOPRFIConfProfTable RFI notches are necessary only when radio services may be disturbed during operation,
therefore this parameter should be separated from all other profiles.
Entries in this table M… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.12 |
| hwVOPSNRMarginProfileIndexNext This object contains an appropriate value to be used for hwVOPSNRMarginConfProfIndex
when creating entries in the hwVOPSNRMarginConfProfTable.
The value '0' indicates that no unas… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.13 |
| hwVOPSNRMarginConfProfTable Noise margins are important for line robustness and need to be configured independently
from other spectrum related parameters to reduce the amount of combinations.
These paramete… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.14 |
| hwVOPINPDelayProfileIndexNext This object contains an appropriate value to be used for hwVOPINPDelayConfProfIndex
when creating entries in the hwVOPINPDelayConfProfTableTable.
The value '0' indicates that no u… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.15 |
| hwVOPINPDelayConfProfTable The INP-Delay parameters for each pair of upstream and downstream channels will be in
an INP-Delay Profile. To cover all possibilities there will be 4 indices in the vector for
IN… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.16 |
| hwVOPVirtualNoiseProfileIndexNext This object contains an appropriate value to be used for hwVOPVirtualNoiseConfProfIndex
when creating entries in the hwVOPVirtualNoiseConfProfTable.
The value '0' indic… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.17 |
| hwVOPVirtualNoiseConfProfTable The Virtual Noise Profile MUST contain the virtual noise PSDs.
A Virtual Noise PSD is not used if the corresponding SNRMODE parameters (hwVOPSNRMarginConfProfMaxSnrmDs,
hwVOPSNRMa… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.18 |
| hwVOPINMProfileIndexNext This object contains an appropriate value to be used for hwVOPINMConfProfIndex
when creating entries in the hwVOPINMConfProfTable.
The value '0' indicates that no unass… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.19 |
| hwVOPDataRateConfProfTable The table hwVOPDataRateConfProfTable contains data rate configuration parameters
for the DSL channel(s).
Entries in this table MUST be maintained in a persistent manner.
… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.2 |
| hwVOPINMConfProfTable Impulse Noise Monitoring(INM) is not required for modem operation but is a capability for
the measurement of Impulse Noise. The INM Profile includes the option to control an INM
f… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.20 |
| hwVOPSosProfileIndexNext This object contains an appropriate value to be used for hwVOPSosConfProfIndex
when creating entries in the hwVOPSosConfProfTable.
The value '0' indicates that no unass… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.21 |
| hwVOPSosConfProfTable Save our Showtime (SOS) provides the receiver with a means to rapidly perform a bit loading
reduction in a specified part of the frequency spectrum. This can be used in case of su… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.22 |
| hwVOPLineSpectrumProfileIndexNext This object contains an appropriate value to be used for hwVOPLineSpectrumConfProfIndex
when creating entries in the hwVOPLineSpectrumConfProfTable.
The value '0' indicates that n… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.3 |
| hwVOPLineSpectrumConfProfTable The table hwVOPLineSpectrumConfProfTable contains the parameters that are mainly set
during the service delivery phase, independently for upstream and downstream.
Entries in this … | table | - | .1.3.6.1.4.1.2011.6.144.1.1.4 |
| hwVOPModeSpecificPSDProfileIndexNext This object contains an appropriate value to be used for hwVOPModeSpecificPSDConfProfIndex
when creating entries in the hwVOPModeSpecificPSDConfProfTable.
The value '0' indicates … | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.5 |
| hwVOPModeSpecificPSDConfProfTable The table hwVOPModeSpecificPSDConfProfTable contains the parameters that define the downstream
and upstream PSDs for a specific xDSL mode.
Entries in this table MUST be maintained… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.6 |
| hwVOPUPBOProfileIndexNext This object contains an appropriate value to be used for hwVOPUPBOConfProfIndex
when creating entries in the hwVOPUPBOConfProfTable.
The value '0' indicates that no unassigned ent… | scalar | HWVOPProfileIndexOrZeroType | .1.3.6.1.4.1.2011.6.144.1.1.7 |
| hwVOPUPBOConfProfTable The table hwVOPUPBOConfProfTable contains all the parameters related to upstream power back-off.
Entries in this table MUST be maintained in a persistent manner.
A default profile… | table | - | .1.3.6.1.4.1.2011.6.144.1.1.8 |