hwTrafficBurstDetectTime
HUAWEI-QOS-MIB ·
.1.3.6.1.4.1.2011.5.2.26.1.25
Object
column
r/w
Integer32
Indicates the duration of traffic burst detection. 0 indicates continuous detection, which does not automatically stop. -1 indicates the duration of traffic burst detection is more than 1440min. The duration of burst traffic detection and the detection end time cannot be configured at the same time, if both nodes are not configured, detection lasts for 1440 minutes by default. Range: -1-1440 Unit: min Default: 1440
Context
- MIB
- HUAWEI-QOS-MIB
- OID
.1.3.6.1.4.1.2011.5.2.26.1.25- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwTrafficBurstDetectInstanceEntry
- Table
- hwTrafficBurstDetectInstanceTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-1440
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwTrafficBurstDetectInstanceId Indicates the index of a traffic burst detection Instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.1 |
| hwTrafficBurstDetectOntPortType Indicates the ONT port type.
Options:
1. invalid(-1) -indicates this parameter is invalid
2. eth(47) -indicates the eth port | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.10 |
| hwTrafficBurstDetectOntPortId Indicates the ONT port ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.11 |
| hwTrafficBurstDetectServiceportIndex Indicats the service port index of traffic burst detection. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.12 |
| hwTrafficBurstDetectUserAclNum Describes the user-defined ACL rule group that is used when
a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Range: 0, 50… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.13 |
| hwTrafficBurstDetectUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
This leaf must be … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.14 |
| hwTrafficBurstDetectIpAclNum Describes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Ra… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.15 |
| hwTrafficBurstDetectIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for traffic burst detection is delivered to a specified port.
Range: 0-4294967295
Make sur… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.16 |
| hwTrafficBurstDetectIpv6AclNum Describes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Ra… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.17 |
| hwTrafficBurstDetectIpv6AclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for traffic burst detection is delivered to a specified port.
Range: 0-4294967295
Make sur… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.18 |
| hwTrafficBurstDetectLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for
traffic burst detection is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure t… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.19 |
| hwTrafficBurstDetectDirection Indicates the direction where an ACL rule for traffic burst detection takes
effect when the device delivers an ACL rule to a specified port or a specified slot.
Options:… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.2 |
| hwTrafficBurstDetectLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic burst detection
is delivered to a specified port or a specified slot.
This leaf must be used together with … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.20 |
| hwTrafficBurstDetectInstanceState Indicates the state of traffic burst detection.
Options:
1.active(1) --indicates the traffic burst detection take effects
2.stop(2) --indicates the traffic burst detection end… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.21 |
| hwTrafficBurstDetectStartTime Indicates the start time of traffic burst detection.
If this time is not set, traffic burst detection is enabled immediately by default. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.2.26.1.22 |
| hwTrafficBurstDetectStopTime Indicates the end time of traffic burst detection.
If this time is not set, traffic burst detection lasts all the time. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.2.26.1.23 |
| hwTrafficBurstDetectRowStatus Row status, used to query, create, modify, and delete a traffic burst detection table.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the val… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.2.26.1.24 |
| hwTrafficBurstDetectPeriod Indicates the period during which the traffic burst detection takes effect.
If this node is not configured, the period during which the traffic burst detection is 10ms by default… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.3 |
| hwTrafficBurstDetectThreshold Indicates the threshold for burst traffic detection.
If the burst traffic exceeds this value, a traffic burst record is generated.
Range: 64-10240000 kbit/s.
Unit: kbit/s. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.4 |
| hwTrafficBurstDetectFrameIndex The index of a shelf in the device. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.5 |
| hwTrafficBurstDetectSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.6 |
| hwTrafficBurstDetectPortIndex Port index, indicating the physical number of the port on a board. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.7 |
| hwTrafficBurstDetectIfType Indicates the type of traffic burst detection.
Options:
1.invalid(-1) --indicates the parameter is invalid
2.port(1) --indicates the traffic burst… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.8 |
| hwTrafficBurstDetectOntId Indicates the ONT ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.9 |