hwTrafficBurstDetectPortIndex
HUAWEI-QOS-MIB ·
.1.3.6.1.4.1.2011.5.2.26.1.7
Object
column
r/w
Integer32
Port index, indicating the physical number of the port on a board.
Context
- MIB
- HUAWEI-QOS-MIB
- OID
.1.3.6.1.4.1.2011.5.2.26.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwTrafficBurstDetectInstanceEntry
- Table
- hwTrafficBurstDetectInstanceTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: -1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwTrafficBurstDetectInstanceId Indicates the index of a traffic burst detection Instance. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.1 |
| hwTrafficBurstDetectOntPortType Indicates the ONT port type.
Options:
1. invalid(-1) -indicates this parameter is invalid
2. eth(47) -indicates the eth port | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.10 |
| hwTrafficBurstDetectOntPortId Indicates the ONT port ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.11 |
| hwTrafficBurstDetectServiceportIndex Indicats the service port index of traffic burst detection. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.12 |
| hwTrafficBurstDetectUserAclNum Describes the user-defined ACL rule group that is used when
a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Range: 0, 50… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.13 |
| hwTrafficBurstDetectUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
This leaf must be … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.14 |
| hwTrafficBurstDetectIpAclNum Describes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Ra… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.15 |
| hwTrafficBurstDetectIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for traffic burst detection is delivered to a specified port.
Range: 0-4294967295
Make sur… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.16 |
| hwTrafficBurstDetectIpv6AclNum Describes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot.
Ra… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.17 |
| hwTrafficBurstDetectIpv6AclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for traffic burst detection is delivered to a specified port.
Range: 0-4294967295
Make sur… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.18 |
| hwTrafficBurstDetectLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for
traffic burst detection is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure t… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.19 |
| hwTrafficBurstDetectDirection Indicates the direction where an ACL rule for traffic burst detection takes
effect when the device delivers an ACL rule to a specified port or a specified slot.
Options:… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.2 |
| hwTrafficBurstDetectLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic burst detection
is delivered to a specified port or a specified slot.
This leaf must be used together with … | column | Unsigned32 | .1.3.6.1.4.1.2011.5.2.26.1.20 |
| hwTrafficBurstDetectInstanceState Indicates the state of traffic burst detection.
Options:
1.active(1) --indicates the traffic burst detection take effects
2.stop(2) --indicates the traffic burst detection end… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.21 |
| hwTrafficBurstDetectStartTime Indicates the start time of traffic burst detection.
If this time is not set, traffic burst detection is enabled immediately by default. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.2.26.1.22 |
| hwTrafficBurstDetectStopTime Indicates the end time of traffic burst detection.
If this time is not set, traffic burst detection lasts all the time. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.5.2.26.1.23 |
| hwTrafficBurstDetectRowStatus Row status, used to query, create, modify, and delete a traffic burst detection table.
It supports the active(1), createAndGo(4), and destroy(6) operations.
During query, the val… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.2.26.1.24 |
| hwTrafficBurstDetectTime Indicates the duration of traffic burst detection.
0 indicates continuous detection, which does not automatically stop.
-1 indicates the duration of traffic burst detection is mo… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.25 |
| hwTrafficBurstDetectPeriod Indicates the period during which the traffic burst detection takes effect.
If this node is not configured, the period during which the traffic burst detection is 10ms by default… | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.3 |
| hwTrafficBurstDetectThreshold Indicates the threshold for burst traffic detection.
If the burst traffic exceeds this value, a traffic burst record is generated.
Range: 64-10240000 kbit/s.
Unit: kbit/s. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.4 |
| hwTrafficBurstDetectFrameIndex The index of a shelf in the device. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.5 |
| hwTrafficBurstDetectSlotIndex A slot index is used to identify the location of a board in a shelf.
You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex. | column | Integer32 | .1.3.6.1.4.1.2011.5.2.26.1.6 |
| hwTrafficBurstDetectIfType Indicates the type of traffic burst detection.
Options:
1.invalid(-1) --indicates the parameter is invalid
2.port(1) --indicates the traffic burst… | column | Enumeration | .1.3.6.1.4.1.2011.5.2.26.1.8 |
| hwTrafficBurstDetectOntId Indicates the ONT ID. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.2.26.1.9 |