hwPstnCircuitTestTrap
HUAWEI-NTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.2.2.3.0.50
Object
notification
PSTN subscriber circuit test result trap: 1. hwPstnCircuitTestStatus 2. hwPstnCircuitTestOffHookResult 3. hwPstnCircuitTestDialToneResult 4. hwPstnCircuitTestReceivePulseResult 5. hwPstnCircuitTestReceiveDTMFResult 6. hwPstnCircuitTestRingBackResult 7. hwPstnCircuitTestBusyToneResult 8. hwPstnCircuitTestBatteryFeedResult 9. hwPstnCircuitTestPoleDetectResult 10. hwPstnCircuitTestOnHookResult 11. hwPstnCircuitTestRingResult 12. hwPstnCircuitTestStopRingResult 13. hwPstnCircuitTestFeedVValue 14. hwPstnCircuitTestFeedVResult 15. hwPstnCircuitTestRingVValue 16. hwPstnCircuitTestRingVResult 17. hwPstnCircuitTestLoopCurrentValue 18. hwPstnCircuitTestLoopCurrentResult
Context
- MIB
- HUAWEI-NTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.2.2.3.0.50- Type
- notification
- Status
- current
- Parent
- hwNTestGeneralTrapsOIDs
- Siblings
- 24
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw112UserRingTestTrap This notification indicates that the 112 PSTN subscriber ring test result trap: 1: hw112UserRingTestResult | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.51 |
| hw112UserDialTestTrap This notification indicates the 112 PSTN subscriber dial test result trap:
1: hw112UserDialTestResult;
2: hw112UserDialTestDigit;
3: hw112UserDialTestLowLevel;
4: hw112UserDial… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.52 |
| hw112UserHowlerTestTrap This notification indicates that the 112 PSTN subscriber howler test result trap: 1:hw112UserHowlerTestResult | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.53 |
| hwIsdnUserInTestTrap This notification indicates the ISDN subscriber circuit test result trap:
1: hwIsdnUserInTestStatus;
2: hwIsdnUserInTestActiveResult;
3: hwIsdnUserInTestDeactiveResult;
4: hwIs… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.54 |
| hwIsdnUserOutTestTrap This notification indicates that the ISDN subscriber loop-line test result trap:
1: hwIsdnUserOutTestStatus;
2: hwIsdnUserOutTestActNT1Result;
3: hwIsdnUserOutTestDeactNT1Result… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.55 |
| hwIsdnUserOutLineTestTrap This notification indicates that the ISDN subscriber loop-line test result trap:
1: hwIsdnUserOutLineTestStatus;
2: hwIsdnUserOutLineTestConclusion;
3: hwIsdnUserOutLineTestACAG… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.56 |
| hwIsdnPortStateSwitchTestTrap This notification indicates that the trap for the result of switching the ISDN subscriber port: 1: hwIsdnPortStateSwitchTestStatus | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.57 |
| hw112IsdnDiagnoseTrap This notification indicates that the trap for the result of 112 ISDN subscriber diagnosis test:
1: hw112IsdnDiagnoseTestRequestID;
2: hw112IsdnDiagnoseTestResult;
3: hw112IsdnDi… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.58 |
| hwPstnCallerEmulateOperatorTrap This notification indicates that the trap for the result of the PSTN call emulation test (calling party):
1: hwPstnCallerEmulateTestRequestID
2: hwPstnCallerEmulateTestStatus
3: … | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.59 |
| hwPstnCalledEmulateOperatorTrap This notification indicates that the trap for the result of the PSTN call emulation test (called party):
1: hwPstnCalledEmulateTestRequestID
2: hwPstnCalledEmulateTes… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.60 |
| hwPstnTelephoneTestOperatorTrap This notification indicates that the trap for the result of the PSTN telephone test:
1: hwPstnTelephoneTestStatus;
2: hwPstnTelephoneTestLoopResist;
3: hwPstnTelephoneTestHookin… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.61 |
| hwIsdnUserDiagnoseTestOperatorTrap This notification indicates that the trap for the ISDN subscriber diagnosis test:
1: hwIsdnUserDiagnoseTestStatus | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.62 |
| hwPstnSignalToneTestOperatorTrap This notification indicates that the trap for the result of the PSTN signal tone test:
1: hwPstnSignalToneTestRequestID;
2: hwPstnSignalToneTestResult;
3: hwPstnSignalToneTestDT… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.63 |
| hwIsdnMeterTestOperatorTrap This notification indicates that the trap for the result of the ISDN meter test:
1: hwIsdnMeterTestStatus | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.64 |
| hwTestBusTestTrap This notification indicates that the trap for the result of the bus test:
1: hwTestBusTestResult;
2: hwTestBusTestVoltage;
3: hwTestBusTestResistance;
4: hwTestBusTestCapacita… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.65 |
| hwFrameLooplineAdjustTrap This notification indicates that the trap for the result of the loop-line test calibration value:
1: hwFrameLooplineAdjustRequestID;
2: hwFrameLooplineAdjustResult;
3: hwFrameL… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.66 |
| hwSDLMeterTestOperatorTrap This notification indicates that the trap for the result of the SDL meter test: 1: hwSDLMeterTestStatus | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.67 |
| hwSDLDMMTestTrap This notification indicates that the trap for the result of the SDL DMM test:
1:hwSDLDMMTestStatus;
2: hwSDLDMMTestConclusion;
3: hwSDLDMMTestACAG;
4: hwSDLDMMTestACBG;
5: hwS… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.68 |
| hwQosTestOperatorTrap This notification indicates that the trap for the QoS test result | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.69 |
| hwLoopLineToneOperatorTrap This notification indicates that the trap for the result of the signal tone test: 1: hwLoopLineToneResult | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.70 |
| hwPotsSelfCircuitTestTrap Trap for the result of the PSTN circuit test:
1: hwPotsSelfCircuitTestLoopRequestID;
2: hwPotsSelfCircuitTestStatus;
3: hwPotsSelfCircuitTestVDDResult;
4: hwPotsSelfCircuitTest… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.71 |
| hwPstnCallEmulateOperatorTrap PSTN call emulation test:
1: hwPstnCallEmulateTestRequestID;
2: Test status (Enumerated type. 1: No dial tone; 2: Dialup fails; 3: The called number does not match; 4: The calle… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.72 |
| hwISDNDiagnoseTestTrap This notification indicates that the trap for the result of the ISDN diagnose test:
1: hwISDNDiagnoseTestRequestID;
2: hwISDNDiagnoseTestResult;
3: hwISDNDiagnoseTestCRCErrNum;… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.73 |
| hwPstnLoopTestTrap This notification indicates that the trap for the result of the PSTN loop test:
1: hwPstnLoopTestRequestID;
2: hwPstnLoopTestResult;
3: hwPstnLoopTestAssistIfIndex;
4: hwPstnLo… | notification | - | .1.3.6.1.4.1.2011.6.21.2.2.3.0.74 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwPstnCircuitTestStatus Describes the Circuit test-Inline Test Status.
Options:
1. normal(1) -indicates normal
2. testfail(2) -indicates abnormal
3. portbusy(3) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17 |
| hwPstnCircuitTestOffHookResult Describes the Circuit Test Result-Off hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.18 |
| hwPstnCircuitTestDialToneResult Describes the Circuit Test Result-dial tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.19 |
| hwPstnCircuitTestReceivePulseResult Describes the Circuit Test Result-Receiving pulse.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.20 |
| hwPstnCircuitTestReceiveDTMFResult Describes the Circuit Test Result-Receiving DTMF.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.21 |
| hwPstnCircuitTestRingBackResult Describes the Circuit Test Result-Ring back tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.22 |
| hwPstnCircuitTestBusyToneResult Describes the Circuit Test Result-Busy tone.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.23 |
| hwPstnCircuitTestBatteryFeedResult Describes the Circuit Test Result-Feeder.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -in… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.24 |
| hwPstnCircuitTestPoleDetectResult Describes the Circuit Test Result-Polarity reversal.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testoutti… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.25 |
| hwPstnCircuitTestOnHookResult Describes the Circuit Test Result-On hook.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.26 |
| hwPstnCircuitTestRingResult Describes the Circuit Test Result-Ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.27 |
| hwPstnCircuitTestStopRingResult Describes the Circuit Test Result-Stop ringing.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal
3. testouttime(3)… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.28 |
| hwPstnCircuitTestFeedVValue Describes the Circuit Test Result-Feeder voltage. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.29 |
| hwPstnCircuitTestFeedVResult Describes the Circuit Test Result-Feeder voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.30 |
| hwPstnCircuitTestRingVValue Describes the Circuit Test Result-Ringing current voltage.
Unit: millivolt, ab. mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.31 |
| hwPstnCircuitTestRingVResult Describes the Circuit Test Result-Ringing current voltage Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.32 |
| hwPstnCircuitTestLoopCurrentValue Describes the Circuit Test Result-Loop current.
Unit: microampere, ab. uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.33 |
| hwPstnCircuitTestLoopCurrentResult Describes the Circuit Test Result-Loop current Result.
Options:
1. normal(1) -indicates Normal
2. abnormal(2) -indicates Abnormal | column | Enumeration | .1.3.6.1.4.1.2011.6.21.2.1.1.1.1.34 |