hwTrunkIfFlushSendEnable

HUAWEI-IF-EXT-MIB · .1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15
MIB view Table view

Object

column r/w Enumeration 
Whether or not permit the trunk to transmit FlushDUs.It is only used 
when it is in the handwork 1:1 mode.Once it is enabled, the newly active 
interface in the trunk will send SmartLink FlushDUs so as to delete the 
related MAC forwarding table of the layer2 equipment in network.Otherwise, 
SmartLink FlushDUs will not be sent.

Context

MIB
HUAWEI-IF-EXT-MIB
OID
.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.15
Type
column
Access
readwrite
Status
current
Parent
hwTrunkIfEntry
Table
hwTrunkIfTable
Siblings
35

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hwTrunkIndex
The value of this object identifies the index of a trunk interface. The currently supported value ranges from 0 to 511.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.1
hwTrunkIfWorkingState
Current working state of backup-access trunk. 1: general mode working state 2: initialization 3: master working 4: backup working
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.10
hwTrunkIfAutoRecover
If auto-recover has been set, the master port will be working instead of the other port when it changes from down state to up state. 1: don't support auto-recover 2: support auto…
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.11
hwTrunkIfPreemptEnable
This object indicates whether LACP priority preemption in static mode is enabled. By default, this function is not enabled.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.12
hwTrunkIfPreemptDelay
The value of this object identifies the delay for LACP priority preemption in static mode. You can set this object only after hwTrunkIfPreemptEnable is enabled. The value ranges f…
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.13
hwTrunkIfTimeoutReceive
The value of this object identifies the timeout period for receiving LACPDUs on an interface in static LACP mode. The value can be: fast: specifies the timeout period for receivin…
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.14
hwTrunkIfFlushVlanId
The ID of Vlan the partner port belongs to.When it is 0, it indicates the function of sending FlushPDU is disabled.
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.16
hwTrunkIfFlushPasswd
A 16-octet read-create value used to define the password for negotiation.
columnSnmpPasswdString.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.17
hwTrunkIfForceSwitchEnable
It is only used when it is in the handwork 1:1 mode and the current working link is the backup link. At that time, working link will move from backup link to master link. Howeve…
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.18
hwTrunkIfStatReset
Reset the statistic information of LACPDUsRx,MarkerPDUsRx,LACPDUsTx, MarkerResponsePDUsTx for all the ports in the current trunk.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.19
hwTrunkIfID
The identification of the Trunk interface. It may identify Trunk and is an index of the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.2
hwTrunkBandwidth
Current bandwidth of trunk in units of 1,000,000 bits per second. This bandwidth is the peculiar property of Eth-Trunk. And to the other kinds of trunk, this bandwidth is -1.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.20
hwTrunkIfArpSendSpeed
Indicates the rate of sending gratuitous ARP packets (in pkts/sec) on the trunk member interface.
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.21
hwTrunkIfLagSelectedPortStd
This object indicates the port selection standard of LACP: based either on the port rate or on the port priority. By default, LACP selects ports based on the port priority. speed(…
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.22
hwTrunkIfLagMaxActiveLinkNum
The value of this object identifies the upper threshold of interfaces that can be selected by the Eth-Trunk in static mode.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.23
hwTrunkETrunkPriority
The priority of the E-Trunk.
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.24
hwTrunkETrunkSysID
The system ID of the E-Trunk. If set ffff-ffff-ffff the system ID will be to default.
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.25
hwTrunkETrunkPriorityReset
Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk priority is resetted.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.26
hwTrunkETrunkSysIDReset
Status of operation, there are yes(1) and no(2). It expresses whether the configure of E-Trunk system ID is resetted.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.27
hwTrunkLocalPrefMode
Local-preference transmit mode of eth-trunk, there are enable(1) and disable(2).The default value is enable(1).
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.28
hwTrunkIfTrackVrrpVrid
The VRID which the static mode Eth-trunk tracked to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.29
hwTrunkIfType
The type of the Trunk interface includes eth-trunk and ip-trunk. The ip-trunk is only comprised by pos link, otherwise the eth-trunk is only comprised by ethernet link.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.3
hwTrunkIfTrackVrrpIfIndex
The VRRP interface which the static mode Eth-trunk tracked to.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.30
hwTrunkIfTrackVrrpReset
Status of operation, there are yes(1) and no(2). The value of this object identifies whether the operation of clearing the configuration is performed. And the configuration is t…
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.31
hwTrunkIfBackupPreemptEnable
The preemption according to the master and slave port will be and only be enabled when eth-trunk is working in backup mode. In default condition, the preemption is disabled.
columnEnabledStatus.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.32
hwTrunkIfBackupPreemptDelay
The waiting time for priority preemption; Unit: minute. It is enabled only when the priority preemption is enabled. It indicates, When it comes to priority preemption, the operati…
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.33
hwTrunkIfCrcErrorSwitchEnable
make trunk member port stop in use if the port have crc error exceed the config threshold, the trunk would be down if member port in use is low
columnEnabledStatus.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.34
hwTrunkIfLagTimeOut
The expired time(Unit is second) of the port to receive LACPDUS in the fast mode. The hwTrunkIfTimeoutReceive is the type of timeout and use hwTrunkIfLagTimeOut to change time in …
columnInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.35
hwTrunkMemCount
The count of Trunk member interfaces per Trunk.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.36
hwTrunkIfIndex
Index number of the Trunk interface, it is consistent with ifIndex of ifTable in IF-MIB.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.4
hwTrunkIfModel
Participated model of interface load. sourceDesMac(2) and sourceMac(10) and desMac(11) are Layer2 hash arithmetic.
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.5
hwTrunkIfBandWidthAffectLinkNum
The value of this object identifies the maximum number of trunk interfaces that can be created. By default, the maximum number of trunk interfaces that can be created is 32. This …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.6
hwTrunkIfMinLinkNum
The value of this object identifies the minimum number of trunk interfaces that can be created. The currently supported value ranges from 1 to 32. By default, the minimum number o…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.7
hwTrunkIfRowStatus
Current operation status of the row
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.8
hwTrunkIfWorkingMode
The value of this object identifies the working mode of an Eth-Trunk interface. 1: master/backup access mode 2: normal mode 3: static LACP mode 4: compatible LACP mode 5: …
columnEnumeration.1.3.6.1.4.1.2011.5.25.41.1.3.3.1.9